Instrukcja obsługi Stanton STR8-30

Streszczenie treści zawartej na stronie nr. 1

FULL MANUAL







DIRECT DRIVE TURNTABLE








STR8-30




WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

Streszczenie treści zawartej na stronie nr. 2

NAME OF PARTS 1 14 13 2 3 12 4 11 10 9 5 6 7 8 1) Hinge For Dust Cover 8) 45 Button 2) Strobe Dots 9) Headshell 3) Slip Mat 10) Pitch Control Slider 4) Center Spindle 11) Tonearm 5) Power Switch 12) Arm Rest 6) Start/Stop Button 13) Counterweight 7) 33 Button 14) Position For Preparing Cartridge BEFORE USE *Check following parts included in the package with the main unit: *Notes: 1) Turntable platter 1) Do not connect the AC power plug before 2) Slip mat assembly has

Streszczenie treści zawartej na stronie nr. 3

ASSEMBLY 1. Remove the main unit with the packing from the box of the tonearm. and take off the packing. 7. Adjustment of horizontal zero (0) balance and 2. Insert the turntable platter onto the center spindle. stylus pressure: 3. Set the slip mat on the platter. (a) Remove the stylus protector, do not touch the 4. Installation of cartridge: stylus tip during the adjustment. When installing a cartridge, refer to the operating (d) Release the arm clamp and lift the tonearm instructio

Streszczenie treści zawartej na stronie nr. 4

OPERATION 1. Rotate the power dial clockwise to turn on the 5. Press the Start/Stop button, the turntable platter power, the speed indicator and the strobe- will start to rotate. illuminator will light up. 6. Move the tonearm over the desired groove. 2. Place a record on the slip mat, when playing a 7. When play is finished, move the tonearm to the 45rpm record with a large center hole, place the arm rest, secure the tonearm with the arm clamp. 45-rpm adaptor on the center spindle. 8.