Streszczenie treści zawartej na stronie nr. 1
Pedestal
TY-ST42PT3S TY-ST42PT3K
Wall stand
TY-ST42PW1
Mobile stand
TY-ST42PF3
Wall-hanging bracket (vertical)
TY-WK42PV1
Wall-hanging bracket (angled)
TY-WK42PR1
Ceiling unit
TY-CE42PS1
Speakers
TY-SP42PM3W TY-SP42PWD3W
Streszczenie treści zawartej na stronie nr. 2
How to use this manual Some notes on how to read this manual In this manual, the number such as "1, 2, 3,..." appears to the left of each step. Go ahead in numerical order. Indicates a situation where incorrect handling may result in death or serious injury for the person performing the installation. Indicates a situation where incorrect handling may result in breakdown or damage to physical objects. Contains more detailed information than in the steps in the main text. Be sure to read the notes
Streszczenie treści zawartej na stronie nr. 3
Before installing Be sure to read through these instructions before starting the installation. The installation should be only performed by a professional person. If any parts are not installed correctly, the display unit may fall, possibly resulting in damage and personal injury. Failure to follow Warning instructions may result in damage and personal injury. Make sure that all safety conditions regarding strength at installation are observed. If the installation strength is insufficient, the d
Streszczenie treści zawartej na stronie nr. 4
Tools list The tools in the following tables are necessary for complete assembly. Before attempting to install the accessories, make sure you have the following tools on hand. Plus screw driver Clean cloth Drill Measure Level gauge ––– Pedestal Wall stand ––– Mobile stand Wall-hanging bracket (vertical) Wall-hanging bracket (angled) Ceiling unit Optional parts list Wire or Chain M6 bolt x 6 – Pedestal – Wall stand – – Mobile stand Wall-hanging – bracket (vertical) Wall-hanging – bracket (angled)
Streszczenie treści zawartej na stronie nr. 5
Accessory list 4 Wall-hanging bracket (vertical) 1 Pedestal TY-ST42PT3-S TY-WK42PV1 TY-ST42PT3-K 5 Wall-hanging bracket (angled) 2 Wall stand TY-WK42PR1 6 Ceiling unit TY-ST42PW1 3 Mobile stand TY-CE42PS1 7 Speakers TY-ST42PF3 TY-SP42PM3W TY-SP42PWD3W For information on the wiring of the Wide Plasma Display after installing accessories, be sure to refer to the documentation that comes with the Wide Plasma Display.
Streszczenie treści zawartej na stronie nr. 6
Parts list Check the part number before performing the installation procedure. Pedestal Base Assembly screw(M5-20) x 4 Wood screw x 2 Assembly screw (M5-30) x 4 Black screw x 2 Band x 2 Clamp x 4 Pole x 2 Black screw x 2 Wall stand Wall pedestal Fixing screw (M5) x 2 Allen key (accessory) Pan head bolt with hex socket Insulating spacer x 4 (M8-45) x 4 Fixing screw (M5) x 2 Assembly Toothed pan washer x 4 Holding bracket
Streszczenie treści zawartej na stronie nr. 7
Mobile stand Holder Shelf Stand base Support x 2 Cable strap x 5 Bolt (M8)x 4 Assembly screw (M6-16) and spring washer x 4 each Assembly screw (M5-15) x 4 Assembly screw (M5-30) x 4 Wall-hanging bracket ( vertical ) Wall-hanging bracket unit Fixing screw (M5) x 2 Allen key (accessory) Pan head bolt with hex socket (M8-45) x 4 Tooted pan Insulating washer x 4 spacer x 4 Wall-hanging bracket ( angled ) Wall-hanging bracket unit Fixing screw (M5-35) x 2 Allen key (accessory) Pan head bolt
Streszczenie treści zawartej na stronie nr. 8
Ceiling unit Ceiling unit Insulating spacer x 4 Fixing bolt (M8-12) x 2 Allen key Fixing screw (M5) x 2 Fixing bolt (M8-100) Fixing bolt (M8-20) x 2 Pan head bolt with hex socket Spring washer Cable tie x 2 (M8-45) x 4 Toothed pan washer x 4 Washer pan nut (M8) Speakers Speaker x 2 Mounting bracket Bracket mounting Speaker cable (right) x 2 Assembly screw (M4-10) x 12 (20 cm) x 2 Mounting bracket Sponge x 2 (left) x 2 Points to note during installation This ceiling unit is for mounting a
Streszczenie treści zawartej na stronie nr. 9
Dimensions of the display unit Units : mm 1020 50 920 50 489 89 44 98 112.2 390.9 65 L L AUDIO AUDIO VD HD PR/CR/R PB/CB/B Y/G VIDEO AUDIO S-VIDEO R R COMPONENT/RGB IN PC IN TUNER IN SERIAL AV IN 18.5 18 18 18 18 20 53.86 39.43 35.7 22 70.69 296 To connect the power cord and others, refer to the documentation that comes with the Wide Plasma Display. 46 46 518 610 615
Streszczenie treści zawartej na stronie nr. 10
Streszczenie treści zawartej na stronie nr. 11
Pedestal TY-ST42PT3S TY-ST42PT3K Assembly diagram CONTENTS Instruction of the installation ...................... 1-2 1.Assembling the pedestal.................................... 1-2 2.Attaching the pedestal to the display unit .............. 1-2 3.Fixing the display unit ....................................... 1-3 1-1
Streszczenie treści zawartej na stronie nr. 12
Instruction of the installation Assembling the pedestal Put the poles into the outer holes on the base, and fasten the four 1 screws. Ensure that the poles sit flush with the bottom of the base. Assembly screw (M5-20) x 4 Attaching the pedestal to the display unit Spread a clean cloth over a level floor or base, and place on it the display 1 unit face down. Place the display face Remove the screws and covers. down on a cloth clean Keep them in a safe place for possible future use. and free
Streszczenie treści zawartej na stronie nr. 13
Insert the two poles at the top of the pedestal into the holes in the base 2 of the display unit as shown in the illustration below. Insert the four screws, two on each side, into the holes in the back 3 Assembly screw of the display unit and screw them into the holes on the inserted poles. (M5-30) x 4 Front Rear Fixing the display unit Band x 2 Fixing the display unit to a desk. Screw the bands to the pedestal with screws. 1 Black screw x 2 Screw the bands to edge of a desk with screws.
Streszczenie treści zawartej na stronie nr. 14
Fixing the display unit to the wall Insert the screws and clamp into the holes at the back of the display Black screw x 2 1 unit. Clamp x 4 Use a strong wire or chain commercially available to fix the display unit 2 to a solid area of the wall or pillar. 1-4
Streszczenie treści zawartej na stronie nr. 15
Wall stand TY-ST42PW1 Assembly diagram CONTENTS Description ................................................... 2-2 Instruction of the installation ...................... 2-3 1.Assembling the wall stand.................................. 2-3 2.Fixing the insulating spacers to the display unit ...... 2-4 3.Attaching the wall stand to the display unit ............ 2-6 4.Fixing the display unit to the wall ......................... 2-7 Removing the display unit........................... 2-8 2-1
Streszczenie treści zawartej na stronie nr. 16
Description Installation diagram Units : mm 5 1020 (40 /32) 19 744 (29 /64) 3 19 ( /4) 1 560 (22 /16) 33 89 (3 /64) 23 390 (15 /64) * A clearance of at least 100mm at the top of the display unit should be provided. 2-2 5 3 611.5 (24 /64) 400 (15 /4) 1 610 (24 /64) 61 1116.5 (43 /64) *100
Streszczenie treści zawartej na stronie nr. 17
Instruction of the installation Assembling the wall stand Check the strength of the installation location. 1 Refer to the holding The height measurements marked ** are particularly important. Do not bracket installation attempt to set up the pedestal in a location where these dimensions and a measurements in the clearance of at least 100 mm at the top of the display unit should be provided. drawing left. Ensure that the wall is able to bear 1) On the wall, measure and mark a height 650 mm abov
Streszczenie treści zawartej na stronie nr. 18
Fix a M6 screw, through any of the slits in the bracket, into the 2 corresponding hole in the wall. Using a level along the top or bottom edge, ensure that holding bracket is horizontal. The holding bracket must always be installed. It prevents the display unit from falling after installation. Fix the screws through the slits into the remaining three holes. 3 Provisionally tighten the fixing screws. 4 If the screws protrude more than 5 mm, it will not be possible to properly install the Fixing
Streszczenie treści zawartej na stronie nr. 19
Remove the four screws. 2 As shown in the illustration, use the supplied "Allen key" to fasten the 3 screw through and , then screw the four to the display unit. Pan head bolt with hex socket Toothed pan washer Insulating spacer 2-5
Streszczenie treści zawartej na stronie nr. 20
Attaching the wall stand to the display unit Insert the two poles at the top of the wall pedestal into the holes in the 1 base of the display unit as shown in the illustration. The screws and covers may be required later if Insert the four screws, two on either side, into the holes in the back the display unit is moved 2 of the display unit and fasten them into the holes in the inserted poles. and mounted directly to a wall, so keep them in a safe place so that they will not get lost. Assemb
