Streszczenie treści zawartej na stronie nr. 1
®
ProHeat 2X
USER’S GUIDE
8920, 8930, 8960,9200, 9300, 9400 SERIES
3 Safety Instructions
4-5 Product View
Assembly
6
7-8 Special Features
9-15 Operation
16-18 Maintenance and Care
Troubleshooting
19-20
21 Consumer Services
22-23 Replacement Parts
24 Warranty
ug310-5943_9200_608.indd 1 6/26/08 2:11:31 PM
Streszczenie treści zawartej na stronie nr. 2
Thanks for buying a BISSELL ProHeat 2X We’re glad you purchased a BISSELL ProHeat 2X heated formula deep cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system. Your ProHeat 2X is well made, and we back it with a limited one-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance. My great
Streszczenie treści zawartej na stronie nr. 3
IMPORTANT SAFETY INSTRUCTIONS ■ When using an electrical appliance, basic precautions Turn off all controls before unplugging. ® should be observed, including the following: ■ Unplug before attaching the TurboBrush. ® ■ Read all instructions before using your ProHeat 2X Be extra careful when cleaning stairs. ■ Close attention is necessary when used by or near children. WARNING: To reduce the risk ■ WARNING: The power cord on this product contains of fire, electric shock, or injury:
Streszczenie treści zawartej na stronie nr. 4
Product view Spray Trigger Power Switch Heater Switch Extra Long Flex Hose Power Cord Upper Handle Easy Carry Handle Heat Indicator Light Tank Carry Handle ™ ReadyTools Detent Pedal Dial 2-in-1 Water Tank Lower Base ™ Edge Sweep Brushes Easy To Remove Nozzle Optional Accessories: These items are available for purchase. To order replacement parts, additional tools or formulas, please refer to page 22-23. ® 3” Tough Stain Brush 4” Upholstery Tool 6” Stair Tool Hard Floor Attachment TurboBru
Streszczenie treści zawartej na stronie nr. 5
Product view Spray Trigger Upper Hose Rack Hose Secure Latch Upper Handle ® TurboBrush Crevice Tool Holder Storage (select models) (select models) Lower Hose Rack Lower Base Keep plenty of genuine BISSELL Detent Pedal Advanced Cleaning Formulas on hand so you can clean whenever it fits your schedule. Always use genuine BISSELL deep cleaning Formula Tank formulas. Non-BISSELL cleaning solutions may harm the machine and void the warranty. BISSELL Formulas: These items are available for
Streszczenie treści zawartej na stronie nr. 6
How to use this guide WARNING: Do not plug in your This user’s guide has been designed to help you cleaner until you have get the utmost satisfaction from your BISSELL completely assembled it per ProHeat 2X. You’ll find assembly and operating the following instructions instructions, safety precautions, as well as and are familiar with all maintenance and troubleshooting instructions. instructions and operating Please read this guide thoroughly before procedures. assembling y
Streszczenie treści zawartej na stronie nr. 7
R I W N A S T E E R Special features of your BISSELL ProHeat 2X Your BISSELL ProHeat 2X deep cleaner is a home cleaning system that uses the power of heat, brushes and cleaning formula to get the deep down dirt for a maximum clean. Not only does it come with a lot of unique features, it has been designed with you, the customer, in mind. Built-in-Heater feature BISSELL ProHeat 2X models all feature a patented built-in heater which will heat the hot tap water you put in up to 25 degrees hot
Streszczenie treści zawartej na stronie nr. 8
C F L L S E L O A O Special features of your BISSELL ProHeat 2X ™ Scotchgard Protector Carpet protection applied at the mill typically wears down over time from heavy foot traffic and everyday cleaning, including deep cleaning. To help restore this important protection, only BISSELL offers deep cleaning formulas with Scotchgard protector. This offers extra protection against dirt and tough stains to keep your carpets looking good longer. To maintain your Scotchgard 5-year limited stain
Streszczenie treści zawartej na stronie nr. 9
Operation Before you clean 1. Plan activities to give your carpet time to dry. 2. Move furniture to another area if cleaning an entire room (optional). 3. Vacuum area with a dry vacuum cleaner thoroughly before deep cleaning. 4. Plan your cleaning route to leave an exit path. It is best to begin cleaning in the corner farthest ATTENTION: from your exit. Some Berber carpets have a 5. Pretreating (optional) tendency to fuzz with wear. Pretreating is recommended to improve cleanin
Streszczenie treści zawartej na stronie nr. 10
R I W N A S T E E R Operation Carpet cleaning (Continued) 1e. 1e. Fasten tanks together by securing the latch in the back. Note: Remember to secure the tank latch in the back and test to make sure it is secure before picking up the tank. 2. Remove formula tank from back of machine. 2. 2a. 2a. Fill the formula tank by first unscrewing the cap and insert. Always use genuine BISSELL formulas to maximize cleaning and for the safety of your machine. Fill formula up to the line and replace the
Streszczenie treści zawartej na stronie nr. 11
Operation Carpet cleaning (Continued) 6. (Continued) Release the trigger and make Keep plenty of genuine BISSELL Fiber one slow forward and backward pass over ™ Cleansing Formula on hand so you the same area to remove any residual dirty can clean whenever it fits your water and aid in drying. Repeat cleaning schedule. Always use genuine BISSELL passes until solution being pulled up deep cleaning formulas. Non-BISSELL appears clean. Continue passes without cleaning solutions may har
Streszczenie treści zawartej na stronie nr. 12
Operation Carpet cleaning (Continued) 8. Water rinse (Optional). Rinsing is an optional 8. step that can be done during the cleaning OR process by switching from one of the clean settings on the Custom Clean dial to a water rinse setting, or it can be done after the carpeted area has been cleaned. Simply choose the water rinse setting on the custom clean dial, and follow the same path as you did for cleaning, taking care to do a forward (wet) stroke by depressing the trigger, a backwa
Streszczenie treści zawartej na stronie nr. 13
Operation Cleaning with attachments (Continued) 4. Set custom clean dial for heavy traffic, normal 5. clean, light clean, or water rinse as desired. 5. Attach the cleaning tool to the end of the hose. 6. Plug in and turn on the power switch and heater (if desired). 7. Clean by pressing the trigger to spray solution onto the area to be cleaned. Slowly move the tool back and forth over the soiled surface. Release the trigger to suction soiled water. Continue to clean in the area, working
Streszczenie treści zawartej na stronie nr. 14
Operations Stain removal Do Not Delay! Attending to an accident soon after it occurs ensures the most optimal clean. Leaving it for an extended period of time may cause it to set and become permanent. 1. Blot up liquids with an absorbent cloth or paper towels. White materials are recommended because certain dyes may bleed and make the stain worse. 2. Gently scrape up any semi-solids with a spoon or spatula. Do not use a knife or other utensil with sharp edges because it could damage the
Streszczenie treści zawartej na stronie nr. 15
Operations Hard floor cleaning Your ProHeat 2X model may have come with a W ARNING: hard floor attachment and Hard Floor Solutions To reduce the risk of fire, Formula. If not, these products are available for electric shock or injury purchase by contacting the BISSELL Consumer unplug from outlet before Services department by phone or at the website. servicing. The hard floor tool provides effective cleaning for linoleum, vinyl, and tile floors. Caution: Do not use on unsealed hardw
Streszczenie treści zawartej na stronie nr. 16
Maintenance and care Machine storage Once your cleaning is complete, make sure W ARNING: the 2-in-1 water tank is emptied, rinsed out, To reduce the risk of fire, and dried before the next use. The formula electric shock or injury tank can remain filled and ready to go, or it unplug from outlet before can simply be emptied back into the formula servicing. bottle if that is more convenient. Note: Store cleaner in a protected, dry area. Since this product uses water, it must not be st
Streszczenie treści zawartej na stronie nr. 17
Maintenance and care Machine care (continued) 7. To clean attachments that may have been used, remove from hose and rinse in clean, running water. Dry and replace attach- ment in the tool caddy. Clean the hose by suctioning clean water from the tap. Before W ARNING: replacing, lift end of hose and stretch out to To reduce the risk of fire, ensure all water is cleared from hose. Refer electric shock or injury, to page 13, illustrations 9 & 10. unplug from the outlet 8. After carpet is
Streszczenie treści zawartej na stronie nr. 18
Maintenance and care W ARNING: Brush removal and large belt replacement To reduce the risk of fire, electric shock or injury, Brushes can be removed for cleaning or unplug from the outlet replacement as needed. before servicing. 1. Follow small belt removal Instructions on page 17. 2. Remove brush rolls by pulling them off of 2. 3. the metal rods. 3. Place cleaned or new brush rolls back onto the rods. Make sure one washer is on each end of the rollers prior to sliding onto the
Streszczenie treści zawartej na stronie nr. 19
Troubleshooting W ARNING: To reduce the risk of fire, electric shock or injury unplug from outlet before servicing. Built-in heater ready light does not illuminate Possible Cause Remedies 1. The heater switch is not turned ON ( I ). 1. Turn the heater switch ON ( I ). 2. The power switch is not turned ON ( I ). 2. Both switches must be ON ( I ) to activate the heater ready light. Reduce Spray or No Spray Possible Cause Remedies 1. Water tank may be empty. 1. Fill heavy duty bladder wit
Streszczenie treści zawartej na stronie nr. 20
Troubleshooting Cleaner not picking up solution Possible Causes Remedies 1. ReadyTools dial may be at wrong setting. 1. Set ReadyTools dial to either FLOOR CLEANING or TOOLS setti ng. 2. Tank may not be seated properly. 2. Pick up both the 2-in-1 water tank and formula tank and reseat them so they fit snugly on the unit. 3. Tank may not be assembled properly. 3. Check to make sure the "lip" of the nozzle is securely hooked into the groove on bot
