Instrukcja obsługi Soundstream Technologies G7170

Streszczenie treści zawartej na stronie nr. 1

Keep in a safe and dry place for future reference.
Model Number of your woofer
Serial Number
Place of purchase
PICASSO COMPONENT SYSTEM
Notes
OWNERS MANUAL/INSTALL GUIDE
Soundstream Technologies
1550 S. Maple Ave.
Montebello, CA 90640 USA
www.SOUNDSTREAM.com
PH: 323.724.4600 FX: 323.722.8125
www.soundstream.com

Streszczenie treści zawartej na stronie nr. 2

Congratulations on your purchase of Soundstream’s Picasso component Tweeter Installation speaker system. The Picasso component system represents Soundstream’s Mounting hardware contained in the packaging will allow a surface or flush design approach to creating musical reproduction with the richness and mount installation. The tweeter should be mounted on the same plane and clarity while maintaining cost effectiveness. Only the best materials and within 6 inches of the mid-bass driver to

Streszczenie treści zawartej na stronie nr. 3

Specifications Mid-bass Installation • Determine the mounting location. Factory speaker locations are Impedance 4 ohms recommended for ease of installation. When installing in the factory speaker locations, make sure that there is enough depth to Freq.Response 50Hz - 20KHz accommodate the replacement speaker. Sensitivity 89dB • If an alternate locations is used, measurements s

Streszczenie treści zawartej na stronie nr. 4

Crossover Installation 1. The crossover should be mounted in a dry, moisture free location. Never install the crossover in the door where it can be damaged by water and moisture. The crossover can be installed in the door panel as long as there is an undamaged vapor barrier. 2. There are three sets of connections on the crossover. The Input terminals should be connected to the source of the signal (radio or amplifier). The woofer terminals should be connected to the midbass driver. The tw