Instrukcja obsługi Panasonic AJ-SD255P

Streszczenie treści zawartej na stronie nr. 1

Panasonic Broadcast




AJ-SD255
Menu Information

Streszczenie treści zawartej na stronie nr. 2

Setup (initial settings) The unit’s main settings are performed while making selections using a menu-driven system. When a TV monitor is connected to the VIDEO MON connector on the unit’s rear panel, the setup menus will appear on the TV monitor. (2) (3) EJECT POWER ON OFF CONTROL REC INHIBIT LOCAL REMOTE OFF ON Digital Video Cassette Recorder AJ- METER PUSH FULL/FINE SHTL/SLOW PLAY REC SEARCH MONITOR SEL REW STOP FF SUPER HEADPHONES INPUT SELECT TC INT TCG CH 1 CH 2 CH 1 CH 2 UNITY VAR COUNTER

Streszczenie treści zawartej na stronie nr. 3

Setup menus This VTR can hold five user files, each of which has its own specific menu settings, and one of these files can be selected for use. Changing the file Setting and releasing the lock mode (1) Press the MENU button. The lock mode can be set to protect the system file and user file (USER2 to USER5) settings. Once the lock mode (2) When the FF button is pressed while holding is set, no further changes can be made to the settings. down the PF button, the next user file is Setting and rele

Streszczenie treści zawartej na stronie nr. 4

Setup menus (continued) Loading user files Saving user files The contents of the USER2, USER3, USER4 or USER5 (1) Press the MENU button. file can be copied (loaded) into the USER1 file. Also, the (2) Press the REW button or FF button while contents of the USER1 file can be copied (saved) into the holding down the PF button to select the USER2, USER3, USER4 or USER5 file. USER1 file. Load/save Lock mode can be (3) Operate the joystick, and move the cursor ( ) on USER 1 USER 2 set the menu screen

Streszczenie treści zawartej na stronie nr. 5

Setup menus (continued) SYSTEM menu No./Item Description No./Item Description 11 18 System phase adjustment. System phase adjustment: Variable range ±180 ° SYS SC SYS H 0000 –3: –13.4 µsec –: Advanced, +: Delayed OFFSET 0001 –2: –8.96 µsec 0002 –1: –4.52 µsec 0000 –128 Note: 0003 0 : 0 sec :: If setting operation is 0004 1 : +4.52 µsec 0128 0 performed, the setting 0005 2 : +8.96 µsec :: value does not return to 0006 3 : +13.4 µsec 0255 127 factory (default) setting. Note: 13 System phase adjust

Streszczenie treści zawartej na stronie nr. 6

Setup menus (continued) USER menu No./Item Description No./Item Description 001 This selects the buttons which can be 008 This selects what information is to be operated on the front panel when the provided by the time code and other LOCAL ENA CONTROL switch has been set to DISPLAY SEL super displays output to the VIDEO REMOTE. MON connector. 0000 DIS : 0000 TIME : Data only. No buttons can be operated. (The data indicates the value for 0001 ST&EJ : whichever of CTL, TC or UB currently O

Streszczenie treści zawartej na stronie nr. 7

Setup menus (continued) USER menu No./Item Description No./Item Description 009 017 This selects the size of the characters This sets the position of the for the superimposed display output characters on the horizontal plane for CHARA H-POS CHARA SIZE from the VIDEO MON connector. the time code and other super displays output to the VIDEO MON connector. 0000 NORMAL : Standard size 0001 LARGE : 0000 0 4 times larger than the standard size :: Note: 0004 4 When LARGE has been selected, only

Streszczenie treści zawartej na stronie nr. 8

Setup menus (continued) USER menu No./Item Description No./Item Description 100 109 This selects whether to rewind the This sets the method used to transfer tape automatically to the tape start to the search mode (stick operation). when the tape end is detected. SEARCH ENA AUTO REW 0000 STICK : 0000 OFF : Operation transfers to the search The tape stops at the tape end. mode when the SEARCH button is 0001 ON : pressed or the stick is operated. The tape is rewound to the tape start. 0

Streszczenie treści zawartej na stronie nr. 9

Setup menus (continued) USER menu No./Item Description No./Item Description 114 160 This sets the repeat play mode. This selects whether to cause the REC INH lamp to flash or light up when the 0000 OFF : cassette has been set to the accidental REC INH MEMORY No repeat play (normal operation) erasure prevention status. LAMP MODE 0001 M-STOP : The tape stops near the BEGIN point when a 0000 LIGHT : The lamp lights up. FF or REW operation has been performed. 0001 FLASH : The lamp flashe

Streszczenie treści zawartej na stronie nr. 10

Setup menus (continued) USER menu No./Item Description No./Item Description 400 403 This menu item is for selecting the When the time selected as the setup time to elapse before the tape menu item No. 400 (STILL TIMER) STILL TIMER STOP protection mode is established when a setting elapses while the unit is in the PROTECT DVCPRO tape is used. STOP mode, the unit automatically It is also for selecting the time to elapse enters one of the tape before the tape protection mode is prote

Streszczenie treści zawartej na stronie nr. 11

Setup menus (continued) USER menu No./Item Description No./Item Description 500 505 For selecting whether to output the This selects the time code to be used VITC signal at the positions selected when an external time code is to be by setup menu items No. 501 (VITC used. VITC BLANK EXT TC SEL POS-1) and No. 502 (VITC POS-2). 0000 LTC : 0000 BLANK : The LTC of the TIME CODE IN VITC signals are not output. connector is used. 0001 THRU : 0001 VITC : VITC signals are output. The VITC of

Streszczenie treści zawartej na stronie nr. 12

Setup menus (continued) USER menu No./Item Description No./Item Description 510 This is used to switch the phase of the 514 This selects whether or not to record time code, which is output from the the internal time code generator value TC OUT REF TIME CODE OUT connector, for the VITC GEN in the VAUX area. external LTC input when the TCG switch is at the EXT position. 0000 OFF : The internal time code generator value 0000 V OUT : is not recorded in the VAUX area. Time code is synchro

Streszczenie treści zawartej na stronie nr. 13

Setup menus (continued) USER menu

Streszczenie treści zawartej na stronie nr. 14

Setup menus (continued) USER menu

Streszczenie treści zawartej na stronie nr. 15

Setup menus (continued) USER menu

Streszczenie treści zawartej na stronie nr. 16

Setup menus (continued) USER menu

Streszczenie treści zawartej na stronie nr. 17

Setup menus (continued) USER menu No./Item Description No./Item Description 802 804 This turns the blanking ON or OFF in For selecting the type of teletext signals to be recorded. the vertical blanking period of the TELETEXT BLANK LINE video output signals. 0000 MOJI : MOJI system SEL 0001 NABTS : NABTS system (For AJ-SD255P) 0000 BLANK : Note: Blanking is effected forcibly for all Signals like VITC signals are often lines. mistakenly detected as teletext signals 0001 THRU : when the N

Streszczenie treści zawartej na stronie nr. 18

Setup menus (continued) USER menu No./Item Description No./Item Description 880 This sets the transfer rate of the 889 This selects the channels to be used IEEE1394 digital interface output. for recording on the tape when DV DIF SPEED DIF AUD IN format data with audio signals in the 0000 S100 : 100 Mbps (For AJ-SD255P) 4CH mode are to be input and then 0001 S200 : 200 Mbps recorded on a DVCPRO tape. YAD255G 0002 S400 : 400 Mbps 0000 CH1&2 : 881 This sets the format when the Received DV for

Streszczenie treści zawartej na stronie nr. 19

Setup menus (continued) USER menu

No./Item Description No./Item Description A00 A02 This selects the user file whose This loads the contents of the selected contents will be loaded into USER1. user file into USER1 and it starts LOAD P. ON LOAD operation with the USER1 settings 0000 USER2 : when the power is turned on. The USER2 file contents are loaded. 0001 USER3 : 0000 OFF : The USER3 file contents are loaded. Operation is started with the settings of 0002 USER4 : the previously set use