Streszczenie treści zawartej na stronie nr. 1
3-113-855-12 (1)
LCD Monitor
Operating Instructions
LMD-2030W
© 2007 Sony Corporation
Streszczenie treści zawartej na stronie nr. 2
Owner’s Record WARNING The model and serial numbers are located at the rear. To reduce the risk of fire or electric shock, do Record these numbers in the spaces provided below. not expose this apparatus to rain or moisture. Refer to these numbers whenever you call upon your To avoid electrical shock, do not open the Sony dealer regarding this product. cabinet. Refer servicing to qualified personnel only. Model No. ____________________ Serial No. ____________________ WARNING Important Safet
Streszczenie treści zawartej na stronie nr. 3
Attention-when the product is installed in Rack: WARNING Using this unit at a voltage other than 120 V may require 1. Prevention against overloading of branch the use of a different line cord or attachment plug, or circuit both. To reduce the risk of fire or electric shock, refer When this product is installed in a rack and is servicing to qualified service personnel. supplied power from an outlet on the rack, please make sure that the rack does not overload the supply For the customers i
Streszczenie treści zawartej na stronie nr. 4
Table of Contents Precaution................................................ 5 On Safety...................................................5 On Installation ...........................................5 Handling the LCD Screen .........................5 Note on faulty pixels on the LCD panel....5 About the Fluorescent Tube ......................5 On Cleaning...............................................5 On Repacking............................................5 On Mounting on a Rack ............
Streszczenie treści zawartej na stronie nr. 5
flashing. In addition, over a long period of use, because of the physical characteristics of the liquid crystal display, such “stuck” Precaution pixels may appear spontaneously. These problems are not a malfunction. On Safety About the Fluorescent Tube • Operate the unit only with a power source as specified in the A specially designed fluorescent tube is installed as the lighting “Specifications” section. apparatus for this unit. If the LCD screen becomes dark, unstable � A nameplate ind
Streszczenie treści zawartej na stronie nr. 6
On Replacing the Parts Features Note that if service personnel changes some parts during repair, these parts may be retained. The LMD-2030W (20-inch) is a multiple format LCD monitor for broadcast/professional use featuring a precise image and high performance. Supporting digital/analog main broadcast signals, 1) and HDMI input, it can be used under various lighting conditions. 1) HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI L
Streszczenie treści zawartej na stronie nr. 7
Blue only mode In the blue only mode, a monochrome display is obtained with all the three R/G/B picture elements driven with a blue signal. This mode is convenient for chroma and phase adjustments and monitoring of VCR noise. Marker function CENTER MARKER, 16:9 MARKER for the 4:3 aspect ratio or 4:3 MARKER for the 16:9 aspect ratio can be displayed. Scan setting You can set the display size to under scan, over scan or full screen mode. Select color temperature and gamma mode You can select t
Streszczenie treści zawartej na stronie nr. 8
Location and Function of Parts and Controls Front Panel 1 MENU VOLUME POWER RGB/ EXT BLUE LINE A HDMI COMPONENT SDI SYNC ONLY SCAN ASPECT KEY INHIBIT RESET ENTER qdqsqa09876 5 4 3 2 qf a Tally lamp ENTER button You can check the status of the monitor by the color of the tally Press to confirm a selected item on the menu. lamp. The tally lamp lights in red, green or amber depending on the f ASPECT select button setting of the REMOTE PARALLEL menu. Sets the aspect ratio of the picture, 4:3 or 16:9
Streszczenie treści zawartej na stronie nr. 9
m LINE A button n Speaker Press to monitor the signal through the LINE A input connector. The audio signal selected by the input select button (j SDI button, k RGB/COMPONENT button, l HDMI button or m LINE A button) on the front panel is output. Input Signals and Adjustable/Setting Items Input signal *4 Item Video, Y/C B & W Component RGB SDI HDMI *6 SD HD SD HD D1 SD HD DVI CONTRAST aaa aa aaa aa BRIGHT aaa aa aaa aa CHROMA a × aa ×× aa a × PHASE a ××× ××× ××× (NTSC) APERTURE aaa a ×× aa a ×
Streszczenie treści zawartej na stronie nr. 10
Rear Panel 8 7 6 5 432 1 IN LINE A PARALLEL REMOTE RGB/COMPONENT OPTION IN OUT AUDIO IN IN OUT G/Y OPTION IN IN OUT IN OUT IN EXT OUT VIDEO B/PB SYNC AC IN IN OUT IN OUT IN OUT AUDIO R/PR AUDIO a HDMI IN connector OUT connector HDMI (High-Definition Multimedia Interface) is an interface that Loop-through output of the IN connector. Connect to the supports both video and audio on a single digital connection, external sync input of video equipment to be synchronized with allowing you to enjoy hi
Streszczenie treści zawartej na stronie nr. 11
N N D C N C MENU VOLUME POWER RGB/ EXT BLUE LI E A LI E B COMPONENT S I SYNC ONLY S A ASPE T KEY INHIBIT RESET ENTER g LINE A connectors Line input connectors for Y/C separate, composite video and Installing to the Rack audio signals and their loop-through output connectors. Press the LINE A button to monitor the signal input through these connectors. If you input signals to both Y/C IN and VIDEO IN, the signal 1 Remove the screws (4) to remove the stand. input to the Y/C IN is selected. Y/C I
Streszczenie treści zawartej na stronie nr. 12
LINE A IN OUT VIDEO AC IN IN OUT AUDIO LINE A IN OUT VIDEO AC IN IN OUT AUDIO Connecting the AC Attaching the Input Power Cord Adaptor 1 Plug the AC power cord into the AC IN socket on the rear Before attaching the input adaptor, disconnect the power cord. panel. Then, attach the AC plug holder (supplied) to the AC power cord. AC IN socket AC power cord Note Do not connect the equipment other than BKM-320D. It causes AC plug holder (Supplied) damage to the unit or the equipment. 2 Slide the A
Streszczenie treści zawartej na stronie nr. 13
Selecting the Default Settings When you turn on the unit for the first time after purchasing it, select the area where you intend to use this unit from among the options. The default setting values for each area MENU VOLUME POWER 3 KEY INHIBIT RESET ENTER 1 5 2~3 1 4 2 1 Press the POWER switch. 3 3 The power is turned on and the SELECT SETTING screen appears. COLOR COMP NTSC 1North America TEMP LEVEL SETUP 1NORTH AMERICA LOW BETA7.5 7.5 S E L E C T S E T T I N G 2Latin America x N O R T H
Streszczenie treści zawartej na stronie nr. 14
4 If ASIA EXCEPT JAPAN is selected: Customers who will use this unit in the shaded areas shown Selecting the Menu in the map below should select NTSC AREA. Other customers should select PAL AREA. Language You can select one of seven languages (English, French, German, Spanish, Italian, Japanese, Chinese) for displaying the menu and other on-screen displays. The current settings are displayed in place of the x marks on the illustrations of the menu screen. A S I A E X C E P T J A P A N NTS
Streszczenie treści zawartej na stronie nr. 15
USER CONFIG (1/2) Rr Using the Menu · RGB/COMP SEL xxxx · COMP LEVEL xxxxx · NTSC SETUP x · GAMMA x · FORMAT DISP xxxx The unit is equipped with an on-screen menu for making various xLANGUAGE ENGLISH adjustments and settings such as picture control, input setting, setting change, etc. You can also change the menu language displayed in the on-screen menu. 4 Press the M or m button to select the “LANGUAGE”, then To change the language display, see “Selecting the Menu Language” press the , o
Streszczenie treści zawartej na stronie nr. 16
3 Select an item. Press the M or m button to select the item, then press the , Adjustment Using the or ENTER button. The item to be changed is displayed in yellow. Menus Note If the menu consists of multiple pages, press M or m to go to Items the desired menu page. The screen menu of this monitor consists of the following items. 4 Make the setting or adjustment on an item. STATUS (the items indicate the When changing the adjustment level: To increase the number, press the M button. current set
Streszczenie treści zawartej na stronie nr. 17
Submenu Setting Adjusting and Changing the MANUAL ADJ If you set the COLOR TEMP to “USER” Settings setting, the item displayed is changed from blue to white, which means you can adjust the color temperature. STATUS menu � ADJUST GAIN…: Adjusts the color balance (GAIN). The STATUS menu is used to display the current status of the unit. � ADJUST BIAS…: Adjusts the color The following items are displayed: balance (BIAS). � COPY FROM: If you select “HIGH” or STATUS (1/2) Rr “LOW”, the white
Streszczenie treści zawartej na stronie nr. 18
Submenu Setting USER CONFIG (1/2) Rr SCAN Sets the scan size of the picture. Select from xRGB/COMP SEL xxxx “OFF” and “FULL” mode. · COMP LEVEL xxxxx · NTSC SETUP x � OFF: Changes between over scan and under · GAMMA x scan. · FORMAT DISP xxx · LANGUAGE xxx � FULL: Changes to over scan, under scan or full screen. PIC DELAY MIN Select to set the delay by the picture processing USER CONFIG (2/2) Rr to the minimum level when the signal is input. xMARKER xxx When 1080I signal is input, “OFF”
Streszczenie treści zawartej na stronie nr. 19
REMOTE PARALLEL menu Select the PARALLEL REMOTE connector pins for which you Troubleshooting want to change the function. You can assign various functions to 1 to 4 pins and 6 to 8 pins. The following lists the functions you can assign to the pins. This section may help you isolate the cause of a problem and as a result, eliminate the need to contact technical support. REMOTE PARALLEL � The display is colored in green or purple t Select the x1PIN xxxxx correct input from the RGB/COMP SEL set
Streszczenie treści zawartej na stronie nr. 20
AUDIO output Phono jack (1), Loop-through External synchronized output connector Specifications BNC type (1), Loop-through, with 75 ohms automatic terminal function Built-in speaker output 0.5 W (mono) Picture performance LCD panel a-Si TFT Active Matrix Picture size 20.1 type General 433 × 271 × 511 mm Power AC100 – 240 V, 50/60 Hz (W/H/Diagonal) Power consumption Maximum: approx. 72 W, 0.8 A – 0.4 A 1 3 1 (17 /8 × 10 /4 × 20 /8 inches) P
