Streszczenie treści zawartej na stronie nr. 1
HONEYWELL
PROFESSIONAL WEATHER STATION
WITH REMOTE CONTROL
TE923W
USER MANUAL
Streszczenie treści zawartej na stronie nr. 2
Table of Contents Introduction 3 Standard Package Contents 4 Installation 5 Before you begin 6 Ultraviolet (UV) Sensor 6 Remote Thermo-Hygrometer Sensor 9 Rain Gauge 11 Anemometer (wind sensor) 13 Main Unit 15 Battery installation 16 Buttons and Controls 18 Initial Set Up 20 Backlight 20 Connecting Weather Station to a Personal Computer 21 Navigating through the modes 22 Customizing your Weather Station 25 Operations and Window Selection 25 Pressure and Weather Forecast Win
Streszczenie treści zawartej na stronie nr. 3
Introduction Thank you for selecting the Honeywell Professional Weather Station with Remote control. This compact and easy-to-use product features a wide variety of time and weather data, such as precise atomic time, perpetual calendar, air temperature, relative humidity, barometric pressure, wind speed and direction, rainfall, UV levels and etc. In this package you will find: One Main Unit (receiver) (TE923WD) One IR Remote Control (TS607) One Rain Gauge (remote rain sensor/transm
Streszczenie treści zawartej na stronie nr. 4
Standard Package Contents Picture Components Main Unit Remote Control AC/DC 7.5V power adaptor UV Sensor consists of: Sensor Unit U-Shaped Sensor holder Circular Ground Stand Stake Base Wall-Mounting Base Thermo Hygrometer Sensor Rain Gauge consists of: Funnel shaped top with battery compartment Rain Gauge bucket Bucket see-saw mechanism Protective screen Anemometer consists of: Wind Cups Wind Vane Anemometer arm Anemometer base Weather Capture CD ROM
Streszczenie treści zawartej na stronie nr. 5
4 screws for securing rain gauge to the flat surface; 4 screws for securing anemometer to vertical Mounting hardware surface 2m (6ft) USB cable PC connection cable Installation The Honeywell Professional Weather Station TE923W operates at 433MHz radio frequency, so no wire installation is required between the main unit (receiver) and the remote weather sensors (transmitters). The remote weather sensors include a thermo-hygrometer (temperature and humidity) sensor, UV (ultraviole
Streszczenie treści zawartej na stronie nr. 6
Before you begin • We recommend using alkaline batteries for the remote weather sensors and the main unit when temperatures are above 32°F (0°C). We recommend using lithium batteries for the remote weather sensors when temperatures are below 32°F (0°C). • Avoid using rechargeable batteries. (Rechargeable batteries cannot maintain correct power requirements). • ALWAYS install batteries in the remote weather sensors before the main unit. • Insert batteries before first use, matching the
Streszczenie treści zawartej na stronie nr. 7
A B G F C E D A. LED INDICATOR • Flashes once when the remote sensor transmits a reading to the main unit • Flashes twice when battery power is low B. BATTERY COMPARTMENT SCREW Holds battery compartment door in place C. U-SHAPED SENSOR HOLDER Holds UV sensor in upright position D. CURCULAR GROUND STAND Secures sensors in the sensor holder on the flat surface E. UV SENSOR LID Covers UV sensor and seals battery compartment F. BATTERY COMPARTMENT Holds two AA-size batteries
Streszczenie treści zawartej na stronie nr. 8
screwdriver • Insert two 2 “AA” size 1.5V batteries (not included) matching the polarities shown in the battery compartment. • Replace the battery compartment door and secure the screw • Screw the UV sensor unit lid back Mounting There are three different options available for mounting the UV sensor: ground stand, stake and wall mount. Ground: • Insert the U-shaped sensor holder round end into the circular ground stand opening, matching 2 round holes in the opening • Secure the
Streszczenie treści zawartej na stronie nr. 9
Placement tips: The UV sensor should be mounted in the area free of sunlight shadows or reflections from the nearby objects. Remote Thermo-Hygrometer Sensor FEATURES • Remote data transmission to the main unit via 433 MHz signal • 328 feet (100 meters) operating range without interference • LCD display of measured temperature and humidity • Five (5) transmission channels selection • Case can be wall mounted using built-in hanger A. LED INDICATOR • Flashes once when the remo
Streszczenie treści zawartej na stronie nr. 10
• Replace the battery compartment door and secure the screws. • Secure the thermo-hygrometer remote sensor in the desired location. Mounting • The remote thermo-hygrometer sensor can be placed on the flat surface or mounted on the wall in vertical position • Use the wall mount hardware and screws provided when mounting the thermo-hygrometer sensor on the wall Placement • The remote thermo-hygrometer sensor should be placed in the area with a free air circulation and sheltered from
Streszczenie treści zawartej na stronie nr. 11
Rain Gauge FEATURES • Precipitation measurement • Remote transmission of the rainfall data to the main unit via 433 MHz signal • 100 feet (30 meters) operating range without interference • Built-in installation level • Non-corrosive protective screen B A C A. Rain gauge bucket Contains mechanical components B. Knob Secures the top on the rain gauge bucket C C. Rain gauge bucket feet Secures the rain gauge on its place G D E H H F I D. Funnel-shaped top with batte
Streszczenie treści zawartej na stronie nr. 12
Secure battery compartment cover G. Built-in level with bubble Ensures level rain gauge mounting for proper operation H. Bucket see-saw mechanism Collects the rainfall in one of its containers and self-empties once full I. Protective screen Protects the rain gauge funnel from debris Battery installation • Unlock the funnel-shaped top on the rain gauge by turning both knobs on the sides in an anti-clockwise direction. • Remove the funnel-shaped top lifting it off the rain gauge b
Streszczenie treści zawartej na stronie nr. 13
Anemometer (wind sensor) FEATURES • Wind speed, wind gust and wind direction measurement • Measures the temperature at the place of anemometer • Remote wind speed, wind gust and wind direction data transmission to the main unit via 433 MHz signal • Operating range 100 feet (30 meters) • Wall or pole mount A B D C A. WIND VANE Indicates wind direction B. WIND CUPS Measures wind speed C. ANEMOMETER BASE • Holds battery compartment • Allows mounting the anemometer vertically
Streszczenie treści zawartej na stronie nr. 14
E. WIND CUPS SHAFT Holds wind cups on the anemometer arm F. BATTERY COMPARTMENT Holds 2 AA-size batteries G. WALL MOUNT SCREW OPENINGS Allows securing the anemometer in place H. BATTERY COVER Secures battery compartment on the anemometer base Assembly • Slide the wind cups on to the anemometer rotating shaft. Do not use force. • Insert the longer arm of the Allen Wrench (provided) into the wind cup set screw opening. Feel the head of the set screw inside the wind cups and tight
Streszczenie treści zawartej na stronie nr. 15
nearby trees, buildings or other structures. • For optimal performance, mount the anemometer at 33 feet (10meters) above the ground in unobstructed area. Mounting Mount the anemometer onto a vertical surface, using the fittings provided. Placement • The anemometer should be mounted in an open area with a free air flow; away from the nearby trees, buildings or other structures • It is suggested mounting anemometer at 33 feet (10meters) above the ground in unobstructed area Main
Streszczenie treści zawartej na stronie nr. 16
• Wind direction • Rainfall amount with minimum and maximum memory • UV intensity with daily and weekly highs and lows • 200 weather records without PC connection • PC software (included) and USB port • Operating range from 100 feet (30 meters) up to 328 feet (100 meters) Display • Light sensor detects low light conditions and LCD lights up automatically when adapter is connected • Infrared remote control of all display functions Power • AC/DC adapter for automatic remote control
Streszczenie treści zawartej na stronie nr. 17
Operation Once the main unit is powered, the display will show all available LCD segments for 2 seconds. IMPORTANT: All of the display functions will be locked, allowing setting your local altitude and pressure parameters .The locked display will show the pressure icon and abbreviation “inHg” flashing in Pressure Window, indoor temperature and humidity readings in Temperature/Humidity Window, default time in Time Window and a default sunset/sunrise time in the Sunrise/Sunset Window.
Streszczenie treści zawartej na stronie nr. 18
K L N M Buttons and Controls Most of the handheld remote control buttons are corresponding to the main unit controls. To expose the main unit control buttons, press the OPEN button on the upper right corner of the main unit and the controls’ cover door will open. Main unit and handheld remote control adequate buttons -Selects the next available mode anti-clockwise A. UP -Increases parameters -Selects the next available mode clockwise B. DOWN -Decrea
Streszczenie treści zawartej na stronie nr. 19
-When depressed and hold in pressure and forecast mode, allows viewing of the different bar charts H. CHANNEL -Changes the temperature and humidity channel -Enables the temperature and humidity channel auto-scan mode -Enables a backlight for 5 seconds I. LIGHT/SNOOZE -Snoozes the alarms Main unit only J. OPEN -Opens the control buttons panel on main unit K. LIGHT SENSOR -Toggles the light sensor to automatic, on or off setting – AUTO, ON, OFF L. SENSITIVITY -Adjusts the lig
Streszczenie treści zawartej na stronie nr. 20
Forecast Button Rain Button -Selects the Rain Mode -Selects the Sunrise/Sunset Mode Sunrise/Sunset Button -Selects the Clock and Alarm Mode Clock and Alarm Button -Selects 24 hours History Chart -Alternates between Pressure, Channel1 Temperature or Button Channel One Humidity Initial Set Up • Power up each of the remotes as instructed in previous sections • Then power up the main display. • Once the main unit is powered, the display will briefly show all available LCD segment
