Instrukcja obsługi Chauvet CH-BOB

Streszczenie treści zawartej na stronie nr. 1

Package Contains:
1 x Simulated Flame Cloth 1 x Blue MR11 12v 20w
1 x Flame Fixture
with Magnets
6 x Screws
3 x Orange MR11 12v 20w
1 x Chain for Hanging
Troubleshooting
• If the unit is not functional – check main power supply is ‘on’ and check fuses.
• If the unit is functional but lamp does not light - lamp may require replacing.
• If after trying this solution you still have a problem contact your dealer or CHAUVET.
Contact Chauvet
USA
Tecnical Assistance: 1-800-762-1084 (954) 9

Streszczenie treści zawartej na stronie nr. 2

On Unit: Replacing Lamps Hanging Chain • Flame Cloth 1. Disconnect from main power supply before attempting to replace either lamps or fuse. 2. Ensure that the unit is sufficiently cool, before removing blown lamps. • Screws for Lamp Cover 3. Never touch new lamps with your fingers; use a tissue or a cloth. • Fan In order to replace the lamps, disconnect from main power supply first, and unscrew the three screws on the side of the unit, which are highlighted on the diagram (fig.1). Only use