Streszczenie treści zawartej na stronie nr. 1
TRUE FOOD SERVICE EQUIPMENT, INC.
2001 East Terra Lane • P.O. Box 970 • O’Fallon, Missouri 63366
(636)-240-2400 • FAX (636)272-2408 • INT’L FAX (636)272-7546 • (800)325-6152
Parts Department (800)424-TRUE • Parts Department FAX# (636)272-9471
INSTALLATION MANUAL FOR T-SERIES FREEZER /
REFRIGERATOR (SWING AND SLIDE DOOR)
TABLE OF CONTENTS
Safety Information
Safety Precautions 1
TSD Do’s and Don’ts 2
Proper Disposal 3
Connecting Electricity 4
Adapter Plugs 4
Installation / Operation Instructions
Streszczenie treści zawartej na stronie nr. 2
True Food Service Equipment, Inc. ............ www.truemfg.com ............
Streszczenie treści zawartej na stronie nr. 3
True Food Service Equipment, Inc. SAFETY INFORMATION How to Maintain Your Freezer / Refrigerator to Receive the Most Efficient and Successful Operation You have selected one of the finest commercial refrigeration units made. It is manufactured under strict quality controls with only the best quality materials available. Your TRUE cooler when properly maintained will give you many years of trouble-free service. WARNING! Use this appliance for its intended purpose as described
Streszczenie treści zawartej na stronie nr. 4
True Food Service Equipment, Inc. SAFETY INFORMATION 2 2 ............ www.truemfg.com ............
Streszczenie treści zawartej na stronie nr. 5
True Food Service Equipment, Inc. SAFETY INFORMATION DANGER! RISK OF CHILD ENTRAPMENT PROPER DISPOSAL OF THE FREEZER / REFRIGERATOR Child entrapment and suffocation are not problems Refrigerant Disposal of the past. Junked or abandoned refrigerators are Your old refrigerator may have a cooling system still dangerous… even if they will sit for “just a few that uses “Ozone Depleting ” chemicals. If you are days.” If you are getting rid of your old refrigerator, throwing away your old r
Streszczenie treści zawartej na stronie nr. 6
True Food Service Equipment, Inc. SAFETY INFORMATION WARNING! HOW TO CONNECT ELECTRICITY Do not, under any circumstances, cut or remove the third (ground) prong from the power cord. For personal safety, this appliance must be properly grounded. The power cord of this appliance is equipped Never unplug your refrigerator by pulling on the with a 3-prong (grounding) plug which mates power cord. Always grip plug firmly and pull with a standard 3-prong (grounding) wall outlet to straight out fro
Streszczenie treści zawartej na stronie nr. 7
True Food Service Equipment, Inc. INSTALLATION / OPERATION INSTRUCTIONS INSTALLATION / OPERATION INSTRUCTIONS OWNERSHIP To insure that your unit works properly from the Before you start to install your True unit, first day, it must be installed properly. We highly carefully inspect it for freight damage. If damage recommend a trained refrigeration mechanic and is discovered, immediately file a claim with the electrician install your True equipment. The cost delivery freight carrier. of
Streszczenie treści zawartej na stronie nr. 8
P True Food Service Equipment, Inc. INSTALLATION / OPERATION INSTRUCTIONS LOCATING A. Place packing material behind cabinet as a cushion. Carefully lay the unit on its back to Removing skid from remove skid. bottom of cabinet. When lifting unit remember to leave the cabinet upright for 24 hours before plugging into power source. Some units have a polyester strap that secures the cabinet to B. Remove skid by unscrewing all base rail anchor the shipping skid. Cut this polyes
Streszczenie treści zawartej na stronie nr. 9
True Food Service Equipment, Inc. INSTALLATION / OPERATION INSTRUCTIONS INSTALLATION OF CASTORS OR OPTIONAL LEGS Important Safeguard for installation of leg/castor (Images 1-5 demonstrate procedure) Securing Castors and Legs B. Install the desired number of shims, making sure the slot of the shim is in contact with the threaded To obtain maximum strength and stability of the stem of the castor. (See image 2) unit, it is important that you make sure each castor is secure. Optional legs are
Streszczenie treści zawartej na stronie nr. 10
True Food Service Equipment, Inc. INSTALLATION / OPERATION INSTRUCTIONS INSTALLING OPTIONAL CASTORS ON A T-12FG Final Location K. Proper leveling of your TRUE cooler is critical to operating success. Effective condensate removal and A. Place styrofoam corners behind cooler for cushion door operation will be effected by leveling. Adjust and carefully tilt unit on it’s back. castors or add shims. B. Remove the louvered grill by removing four phillips-head screws. C. Remove the four
Streszczenie treści zawartej na stronie nr. 11
True Food Service Equipment, Inc. INSTALLATION / OPERATION INSTRUCTIONS CONDUCTORS AND CIRCUITS Wire Gauge for 2% Voltage Drop in Supply Circuits 115 Volt Distance In Feet To Center of Load Amps 20 30 40 50 60 70 80 90 100 120 140 160 2 14 14 14 14 14 14 14 14 14 14 14 14 3 14 14 14 14 14 14 14 14 14 14 14 12 4 14 14 14 14 14 14 14 14 14 12 12 12 5 14 14 14 14 14 14 14 12 12 12 10 10 6 14 14 14 14 14 14 12 12 12 10 10 10 7 14 14 14 14 14 12 12 12 10 10 10 8 8 14 14 14 14 12
Streszczenie treści zawartej na stronie nr. 12
True Food Service Equipment, Inc. INSTALLATION / OPERATION INSTRUCTIONS ELECTRICAL INSTRUCTIONS A. Before your new unit is connected to a WARNING power supply, check the incoming voltage with a Compressor warranties are void if compressor voltmeter. If anything less than 100% of the rated burns out due to low voltage. voltage for operation is noted, correct immediately. WARNING B. All units are equipped with a 7 ft. (2.1m) service Power supply cord ground should not be cord, and must be
Streszczenie treści zawartej na stronie nr. 13
True Food Service Equipment, Inc. INSTALLATION / OPERATION INSTRUCTIONS FREEZERS ONLY! (COMPRESSOR BAND REMOVAL) PLEASE CHECK YOUR COMPRESSOR. IF THERE IS A SHIPPING BAND, PLEASE REMOVE. WARNING: COMPRESSOR BAND MUST BE REMOVED BEFORE UNIT IS CONNECTED TO POWER SUPPLY. The metal band can be reached from the rear of the unit. A pair of tin snips will cut through the band. Once the band is located and removed. You may proceed with the installation of your new equipment. (See image to
Streszczenie treści zawartej na stronie nr. 14
True Food Service Equipment, Inc. INSTALLATION / OPERATION INSTRUCTIONS SHELVING INSTALLATION / OPERATION & LIGHT SWITCH LOCATION SHELF & ORGANIZER INSTALLATION: Step 1 A. Hook shelf clips onto shelf standards. (see illustration). B. Position all four shelf clips equal in distance from the floor for flat shelves. T-Series & GDM-5 Airflow WIRE SHELVES: Guard Wire shelves are oriented so that cross support bars are facing down. Shelf NOTE: T-Series models include an airflow guar
Streszczenie treści zawartej na stronie nr. 15
True Food Service Equipment, Inc. INSTALLATION / OPERATION INSTRUCTIONS FREEZERS DEFROST TIME CLOCK OPERATION (Grasslin Timer) RECOMMENDED DEFROST Your True freezer contains a defrost system STEP 1 SETTINGS: that is temperature terminated, however The white tabs located on the outmost area the time clock has been designed with a True Manufacturing has factory set your of the time clock have been factory set time termination back-up so that the defrost defrost time clock to a recom
Streszczenie treści zawartej na stronie nr. 16
True Food Service Equipment, Inc. INSTALLATION / OPERATION INSTRUCTIONS Make sure capacitors are discharged 5. If the compressor has an external IF THE COMPRESSOR WILL before checking. Check for continuity protector, check for continuity through NOT RUN between each capacitor terminal and the the protector or protectors. All external 1. If there is no voltage at the case. Continuity indicates a short, and inherent protectors on compressors can compressor terminals, follow the the cap
Streszczenie treści zawartej na stronie nr. 17
True Food Service Equipment, Inc. INSTALLATION / OPERATION INSTRUCTIONS 4. If all operating conditions are compartment in the top of the normal, the voltage supply at the 3. Check the compressor discharge freezer. This control is attached to the compressor terminals balanced and pressure. An abnormally high evaporator drain pan. within limits, the compressor crankcase discharge pressure can cause a loss of temperature within normal limits, capacity, and can be caused b
Streszczenie treści zawartej na stronie nr. 18
True Food Service Equipment, Inc. INSTALLATION / OPERATION INSTRUCTIONS Light Cover Installation for T-12FG Rubber Gasket REQUIRED TOOLS 1 • none - IMPORTANT - - IMPORTANT - Before installing lamp cover Before replacing light cover turn cabinet on and wait until it turn cabinet on and allow it to reaches temperature. reach temperature. Lamp Holder STEP 1 Locate rubber gasket behind lamp holder mounted to evaporator housing. (See Image 1). STEP 2 2 Fit the bottom edge of the lamp cover i
Streszczenie treści zawartej na stronie nr. 19
REMO E. McCabe VE COVER MAKE POWER CONNECTION P True Food Service Equipment, Inc. MAINTENANCE, CARE & CLEANING MAINTENANCE, CARE & CLEANING CLEANING THE CONDENSER COIL When using electrical appliances, basic safety precautions should be followed, including the following: REQUIRED TOOLS: OUTDOOR LOCATION: � Phillips Screwdriver (GDM-33, GDM-47, and GDM-49 only) After brushing condenser coil blow CO through � Stiff Bristle Brush 2 condenser from fin side to fan. (See Image 4.) � Adjustabl
Streszczenie treści zawartej na stronie nr. 20
True Food Service Equipment, Inc. MAINTENANCE, CARE & CLEANING IMPORTANT WARRANTY INFORMATION Condensers accumulate dirt and require cleaning every 30 days. Dirty condensers result in compressor failure, product loss, and lost sales... which are not covered by warranty. If you keep the Condenser clean you will minimize your service expense and lower your electrical costs. The Condenser requires scheduled cleaning every thirty days or as needed. Air is pulled through the Condenser continuousl
