Instrukcja obsługi Orion Telescopes & BinocularsRAS-S10C

Streszczenie treści zawartej na stronie nr. 1

THE CHOICE OF MOUNTING SITE (Please note the following matters and obtain permission from customer before installation).


Carefully read through the procedures of proper
installation before starting installation work.
! WARNING ! WARNING


The sales agent should inform customers regarding



The unit should be mounted at stable, non-vibratory location which The outdoor unit must be mounted at a location which can sup-
the correct operation of installation.
can provide full support to the unit

Streszczenie treści zawartej na stronie nr. 2

Please mount the outdoor unit on stable ground 1 Preparation of Pipe 3 Removal Of Air From The Pipe And Gas Leakage Inspection to prevent vibration and increase of noise level.
Decide the location for piping after sorting out
Use a pipe cutter to cut the copper pipe. Procedures of using Vacuum Pump for Air Removal the different types of pipe available. Trimming tool As shown in figure on the right, remove Copper pipe the cap of valve head and valve core 1 Please face this side (suction