Streszczenie treści zawartej na stronie nr. 1
DO NOT
DISCARD
Owner’s Manual
Installation and Operation
Model(s):
LUX60
CAUTION
DO NOT DISCARD THIS MANUAL
• Read, understand and follow • Leave this manual with
• Important operating and
these instructions for safe party responsible for
maintenance instructions
installation and operation. use and operation.
included.
WARNING WARNING
HOT SURFACES!
If the information in these instruc-
Glass and other surfaces are hot during
tions is not followed exactly, a
operation and cool down.
fi re ma
Streszczenie treści zawartej na stronie nr. 2
Read this manual before installing or operating this appliance. Please retain this owner’s manual for future reference. A. Congratulations Congratulations on selecting a Heat & Glo gas fi replace, an This owner’s manual should be retained for future reference. elegant and clean alternative to wood burning fi replaces. We suggest that you keep it with your other important The Heat & Glo gas fi replace you have selected is designed documents and product manuals. to provide the utmost in safety,
Streszczenie treści zawartej na stronie nr. 3
Safety Alert Key: • DANGER! Indicates a hazardous situation which, if not avoided will result in death or serious injury. • WARNING! Indicates a hazardous situation which, if not avoided could result in death or serious injury. • CAUTION! Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. • NOTICE: Used to address practices not related to personal injury. Table of Contents A. Congratulations 2 C. Use of Elbows 27 B. Limited Lifetime Warranty 5
Streszczenie treści zawartej na stronie nr. 4
17 Reference Materials A. Appliance Dimension Diagram 54 B. Vent Components Diagrams 55 C. Service Parts 59 D. Optional Components 64 E. Contact Information 65 = Contains updated information. 4 Heat & Glo • LUX60 • 4062-116 • Rev. G • 4/11
Streszczenie treści zawartej na stronie nr. 5
B. Limited Lifetime Warranty Hearth & Home Technologies Inc. LIMITED LIFETIME WARRANTY Hearth & Home Technologies Inc., on behalf of its hearth brands (”HHT”), extends the following warranty for HHT gas, wood, pellet, coal and electric hearth appliances that are purchased from an HHT authorized dealer. WARRANTY COVERAGE: HHT warrants to the original owner of the HHT appliance at the site of installation, and to any transferee taking ownership of the appliance at the site of installation with
Streszczenie treści zawartej na stronie nr. 6
B. Limited Lifetime Warranty (continued) WARRANTY CONDITIONS: WARRANTY EXCLUSIONS: - - - - - This warranty is void if: LIMITATIONS OF LIABILITY: 4021-645C 12-29-10 Page 2 of 2 6 Heat & Glo • LUX60 • 4062-116 • Rev. G • 4/11
Streszczenie treści zawartej na stronie nr. 7
Listing and Code Approvals 1 1 A. Appliance Certifi cation D. High Altitude Installations NOTICE: If the heating value of the gas has been reduced, MODELS: LUX60 these rules do not apply. Check with your local gas utility or LABORATORY: Underwriters Laboratories, Inc. (UL) authorities having jurisdiction. TYPE: Vented Gas Fireplace Heater When installing above 2000 feet elevation: STANDARD: ANSI Z21.88b-2008 • CSA 2.33b-2008 • In the USA: Reduce input rate 4% for each 1000 feet above 200
Streszczenie treści zawartej na stronie nr. 8
Inspection Note: The following requirements reference various The state or local gas inspector of the side wall horizon- Massachusetts and national codes not contained in this tally vented gas fueled equipment shall not approve the document. installation unless, upon inspection, the inspector ob- serves carbon monoxide detectors and signage installed H. Requirements for the Commonwealth of in accordance with the provisions of 248 CMR 5.08(2)(a)1 Massachusetts through 4. For all side wall
Streszczenie treści zawartej na stronie nr. 9
User Guide Operating Instructions 2 2 If you expect that small children or vulnerable adults may A. Gas Fireplace Safety come into contact with this fi replace, the following precau- tions are recommended: WARNING • Install a physical barrier such as: HOT SURFACES! - A decorative fi rescreen. Glass and other surfaces are hot - Adjustable safety gate. during operation and cool down. • Install a switch lock or a wall/remote control with child Hot glass will cause burns. protection lockout feat
Streszczenie treści zawartej na stronie nr. 10
C. Clear Space G. Remote Operation WARNING! DO NOT place combustible objects in front of FCC Requirements the fi replace or block louvers. High temperatures may start a fi re. See Figure 2.2. WARNING! Changes or modifi cations to this unit not expressly approved by the party responsible for Avoid placing candles and other heat-sensitive objects on compliance could void the user’s authority to operate mantel or hearth. Heat may damage these objects. the equipment. Note: This equipment has been
Streszczenie treści zawartej na stronie nr. 11
Matching Security Codes H. Before Lighting Fireplace It may be necessary to program the control module to the Before operating this fi replace for the fi rst time, have a security code of the remote upon initial use, if batteries qualifi ed service technician: are replaced, or if a replacement control module is pur- • Verify all shipping materials have been removed from chased from your dealer. To program the control module: inside and/or underneath the fi rebox. • Push the LEARN button located ne
Streszczenie treści zawartej na stronie nr. 12
NG I. IntelliFire Ignition System (IPI) Lighting Instructions • For normal use, activate/deactivate your fi replace with the remote control. • If your fi replace must be deactivated for serviced or an extended period of time, follow the instructions below. • Shut off external gas cock. • Shut off electric power to the appliance. This appliance needs fresh air for safe operation and must be installed so there are provisions for FOR YOUR SAFETY READ BEFORE LIGHTING adequate combustion and ventil
Streszczenie treści zawartej na stronie nr. 13
J. After Fireplace is Lit Initial Break-in Procedure • The fireplace should be run three to four hours continuously on high. • Turn the fi replace off and allow it to completely cool. • Remove fi xed glass assembly. See Section 15.A. • Clean fi xed glass assembly. See Section 3.A. • Replace the fi xed glass assembly and run continuously on high an additional 12 hours. This cures the materials used to manufacture the fi re- place. NOTICE! Open windows for air circulation during fi replace break-in.
Streszczenie treści zawartej na stronie nr. 14
Maintenance and Service 3 3 Any safety screen or guard removed for servicing must be replaced prior to operating the fi replace. When properly maintained, your fi replace will give you many years of trouble-free service. We recommend an- nual service by a qualifi ed service technician. “L” Plates A. Maintenance Tasks-Homeowner Installation and repair should be done by a qualifi ed service technician only. The fi replace should be inspect- ed before use and at least annually by a professional
Streszczenie treści zawartej na stronie nr. 15
• See Section 15.A for instructions to remove fi xed glass Remote Control assembly. Frequency: Seasonally • Clean glass with a non-abrasive commercially available By: Homeowner cleaner. Tools needed: Replacement batteries and remote control - Light deposits: Use a soft cloth with soap and water instructions. - Heavy deposits: Use commercial fi replace glass cleaner (consult with your dealer) • Locate remote control transmitter and receiver. • Carefully set fi xed glass assembly in place on fi
Streszczenie treści zawartej na stronie nr. 16
B. Maintenance Tasks-Qualifi ed Service Burner Ignition and Operation Technician Frequency: Annually The following tasks must be performed by a qualifi ed By: Qualifi ed Service Technician service technician. Tools needed: Protective gloves, vacuum cleaner, whisk Gasket Seal and Glass Assembly Inspection broom, fl ashlight, voltmeter, indexed drill bit set, and a manometer. Frequency: Annually • Verify burner is properly secured and aligned with pilot By: Qualifi ed Service Technician or ignite
Streszczenie treści zawartej na stronie nr. 17
Light Glass Replacement/Cleaning LED Light Bar Replacement Frequency: Annually Frequency: As needed By: Qualifi ed Service Technician By: Qualifi ed Service Technician Tools needed: Protective gloves Tools needed: Protective gloves, phillips screwdriver • Disconnect power to fi replace. • Disconnect power to fi replace. • Remove the “L” plates and inner surround frame (see • Remove the “L” plates and inner surround frame (see surround install). This will make the valve compartment surround instal
Streszczenie treści zawartej na stronie nr. 18
Back RH • Remove three cover plates by removing two screws from Clean Porcelain Panels each plate. See Figure 3.8. Frequency: As needed By: Qualifi ed Service Technician Remove Tools needed: Protective gloves, phillips screwdriver Plates • Disconnect power to fi replace. • Remove the “L” plates and inner surround frame (see surround install). This will make the valve compartment and glass accessible. (Refer to Section 3.A. Glass Cleaning.) • Remove glass rock, set aside. Note: Mark and note
Streszczenie treści zawartej na stronie nr. 19
• Remove decorative steel log assembly by removing 3 • Remove pilot shield by removing four screws. See Figure screws, lifting up and out (Figure 3.10). 3.12. Remove 4 Screws Figure 3.12 Remove Pilot Shield Figure 3.10 Remove Decorative Steel Log Assembly • Remove hearth pan by removing 7 screws. See Figure 3.13. • Remove center burner tube by removing two screws. See Figure 3.11. Figure 3.13 Remove Hearth Pan Figure 3.11 Remove Center Burner Tube • Remove refractory: - Remove six bottom scre
Streszczenie treści zawartej na stronie nr. 20
Installer Guide Getting Started 4 4 A. Typical Appliance System NOTICE: Illustrations and photos refl ect typical installations and are for design purposes only. Illustrations/diagrams are not drawn to scale. Actual product may vary from pictures in manual Noncombustible roof Vertical Termination Cap flashing maintains minimum Section 10 clearance around pipe Storm Collar Section 10 Section 10 Vent pipe penetrates roof, preverably without affecting roof rafters. Section 8 Ceiling firestop o
