Streszczenie treści zawartej na stronie nr. 1
Sipura SPA-1001
Simplified Users Guide
Version 1.1a
A Step by Step Introduction
Written by Jason
from
JMG Technology
http://www.jmgtechnology.com.au
Streszczenie treści zawartej na stronie nr. 2
Section 1 – Getting Started When you receive your SPA-1001 it should contains the following items: 1. SPA-1001 2. Power supply 3. Phone cable 4. Network cable 5. Quickstart guide Setting up the hardware: Step 1: Connect the power cable to your SPA-1001 Step 2: Connect the network cable from your SPA-1001 to your DHCP enabled modem/router Step 3: Connect an analogue phone to the “Phone” port in the SPA-1001. Step 4: Turn the power on Step 5: Pick up the phone and dial **** (You should hear a vo
Streszczenie treści zawartej na stronie nr. 3
Section 2 – Configuring the SPA-1001 via the Web Interface Once you have the IP address of your SPA-1001 you can access the web interface by opening a web browser and typing the following in the Address : ht tp:// For example: http://192.168.1.10 You should now see the Sipura SPA-1001 Phone Adapter Configuration screen. Now you will need to log into the unit as Administrator and change the view to advanced. See images below. Click on “Admin Login” Click on “advanc
Streszczenie treści zawartej na stronie nr. 4
Section 3 – Regional Settings Click on the “Regional” tab. The following changes are optional, however they will make your SPA-3000 sound more Australian. Under the Call Progress Tones and Distinctive Ring Patterns headings change: Dial tone: 400@-19,425@-19,450@-19;10(*/0/1+2+3) Busy Tone: 425@-19;10(.375/.375/1) Reorder Tone: 425@-19, 425@-29;60(.375/.375/1,.375/.375/2) Ring Back Tone: 400@-19,425@-19,450@-19;*(.4/.2/1+2+3,.4/2/1+2+3) MWI Dial Tone: 400@-19,425@-19,450@-19;2(.1/.1/1+2);10(
Streszczenie treści zawartej na stronie nr. 5
The following changes are required under the Miscellaneous heading : FXS Port Impedance: 220+820||115nF If you would like to configure the Time and Daylight savings, see Appendix D. This is completely optional.
Streszczenie treści zawartej na stronie nr. 6
Section 4 – Line 1 or Line 2 Settings Click on the “Line 1” or “Line 2” tab. The settings for Line 1 and Line 2 are identical, so for each provider you want to register follow the instructions below: The first thing that needs to be changed is under the Proxy and Registration heading. Here you will need to enter the proxy and registration information given to you by your VoIP provider. The following image shows the setup for MyTel. The second thing that needs to be configured is under the Sub
Streszczenie treści zawartej na stronie nr. 7
The next thing that needs to be altered is under the Audio Configuration heading. The following change is required. Preferred Codec: G729a The final item that requires changing is under the Dial Plan heading. The dial plan will vary from provider to provider. The dial plan show below is an example only, and may require alteration depending on which VoIP provider you subscribe to. See Appendix A for a detailed description of how dial plans work. Dial Plan: (*xx|xx.)
Streszczenie treści zawartej na stronie nr. 8
Section 5 – Phone Settings Click on the “Phone” tab. Under the Line Section heading, you can set which line (or provider) you wish to use as your default outbound provider. Default Line: Line 1 or Line 2 (which ever you choose) Alt Dial Tone Multiplier: Used to convert the dial tone, so you know you have switched lines. A multiplier of 1.1 sounds ok. nd Line 2 Select Code: The character or characters used to switch to the 2 line. Everything should now be setup and ready to use. Make sure you
Streszczenie treści zawartej na stronie nr. 9
Appendix A – Dial Plans Dial plans can be very confusing at first glance. However they are invaluable feature of the SPA-1001 so you should at least learn the basics of how they work. The following dial plans are to show how to use the various features of dial plans. You should play around with them to suit your needs. Dial Plan Syntax ( ) - The entire dial plan must be surrounded by an open and close bracket. | - Each individual dial plan must be separated by a pipe | character. 0-9 - Trea
Streszczenie treści zawartej na stronie nr. 10
Appendix B - Factory Reset To perform a factory reset on your SPA-1001 dial **** on the phone. You should hear a Sipura message asking you to enter your selection. . Then dial 73738#. WARNING: This will restore your unit back to factory defaults, all your information will be lost. See Appendix E for all Phone Menu Options.
Streszczenie treści zawartej na stronie nr. 11
Appendix C – Upgrading Firmware The latest firmware for the Sipura SPA-1001 can be located on the Sipura support site. http://www.sipura.com/support/index.htm To upgrade the firmware in your SPA-1001 download the latest firmware, unzip it and run the exe file provided. At the time of writing this document version 3.1.8(SEc) is the latest firmware, The first thing that you need to do is enter the IP address of your SPA into the spaces provided. In the example below the SPA-1001 is located at 1
Streszczenie treści zawartej na stronie nr. 12
Click on the Upgrade button to begin the upgrade procedure. The upgrade itself should only take a minute or so. Whatever you do don't turn the power of during this operation. Once the procedure has finished, you should be presented with the following screen and your upgrade has been completed. Note: The upgrade procedure does not effect your current settings.
Streszczenie treści zawartej na stronie nr. 13
Appendix D – Setting up a Time Server and Daylight Saving Rules You can configure the SPA-3000 to automatically retrieve the current date and time. (Including daylight savings). To do this you will need to enter in a NTP server. Some providers will provide you with one. Change to the “System” tab Primary NTP Server: au.pool.ntp.org Change to the “Regional” tab For NSW these settings seem to work: Time Zone: GMT+11:00 Daylight Saving Time Rule: start=3/-1/7/3;end=10/-1/7/2;save=-1
Streszczenie treści zawartej na stronie nr. 14
Appendix E – Sipura IVR (Phone Menu) The Interactive Voice Response (IVR) capabilities of the SPA are designed to give the administrator and/or user basic read/write capabilities such that the unit can attain basic IP network connectivity and the more advanced browser-based configuration menu may be accessed. IVR Action IVR Menu Parameters Notes Choice Enter Menu **** None You should hear a message saying “Sipura Configuration Menu. Please enter option followed by the pound key or hang up to
Streszczenie treści zawartej na stronie nr. 15
IVR Action IVR Menu Parameters Notes Choice Check Firmware 150 None IVR will announce the Version version of the firmware running on the SPA. Check Primary DNS 160 None IVR will announce the Server Setting current setting in the Primary DNS field. Set Primary DNS Server 161 Enter IP address Will require password if set. Setting using numbers on the telephone key pad. Use the * (star) key when entering a decimal point. Check Web Server Port 170 None IVR will announce the port that the web server
Streszczenie treści zawartej na stronie nr. 16
Appendix F – Sipbroker Sipbroker is a free service that allows you to dial between certain VoIP providers. To use sipbroker you will need to add the following entry to your dial plan. <**,:>[x*][x*].<:@sipbroker.com> Please see http://www.sipbroker.com to read all about the great service provided my sipbroker. To test that Sipbroker is working for you, you first dial ** and then try one of the numbers below. *266-300 monkey sounds *266-301 echo test *266-303 Ireland speaking clock *266-30
