Instrukcja obsługi NEC Electronics America85480QRO02

Streszczenie treści zawartej na stronie nr. 1

Quick Reference for Other Features
Data Port: Located on the right side of the phone, you can
connect any standard telephone device to the
phone (computer modem, answering machine,
fax machine, etc.).
Time/Date: Not user programmable. The information is
initially received from the Caller ID information.
The telephone will then maintain the correct
time/date.
Tone/Pulse: Set the Tone/Pulse switch located on the back edge
of the phone to the required setting for your service
(Tone=touch-tone dial

Streszczenie treści zawartej na stronie nr. 2

NCS Feature Telephone NCS Feature Telephone Quick Reference for Programmed Speed Dial Keys Installing the Phone . . . Connecting the Power 1. Plug the power pack into a standard 110V AC power outlet. Handsfree: Press SPEAKER + HANDSFREE to activate Intercom Pack and Telephone: Handsfree Mode. The mounting hole is provided to secure the power Deactivate by pressing SPEAKER. pack to the outlet. 2. Using the 3’ modular line cord provided, connect one Status: Lift the handset + Press the STATUS key

Streszczenie treści zawartej na stronie nr. 3

NCS Feature Telephone NCS Feature Telephone Turn Off Your Telephone’s Mic So Your Caller Can’t Hear Your Voice. . . Disable the Handset 1. While on a call, press MUTE. Microphone and/or the The caller will not hear your voice and the MUTE Speakerphone: key will light to show that the feature is activated. To deactivate, press MUTE again. Redial Your Last Number . . . To Automatically Redial 1. Lift the handset. the Last Number that 2. Press REDIAL. was Manually Dialed: The last number dialed cal

Streszczenie treści zawartej na stronie nr. 4

NCS Feature Telephone NCS Feature Telephone Using a Headset . . . Using Callback . . . Install the Headset: 1. Plug the modular end of the headset cord into the Enter the area code into storage to properly use this feature. This allows the phone to modular port of the telephone labeled HEADSET. recognize your local area code and remove it from the dialed number. 2. Slide the HEADSET/HANDSET selector switch to the Select a Call in 1. Press UP or DOWN to activate the stored memory. HEADSET posit