Streszczenie treści zawartej na stronie nr. 1
Model No. NCTL11992
Serial No.
Find the serial number in the location
USER'S MANUAL
shown below. Write the serial number
in the space above for reference.
Serial Number Decal
If you require SERVICE for this
product, please call
SEARS:
1-800-4 MY HOME
(469-4663)
If you are MISSING PARTS or
require INFORMATION on how
to operate this product, call
1-888-936-ICON
(4266)
CAUTION
Read all precautions and instruc-
tions in this manual before using
Visit our website at
this equipment. Save this manual
Streszczenie treści zawartej na stronie nr. 2
TABLE OF CONTENTS LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY
Streszczenie treści zawartej na stronie nr. 3
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the following important precautions and information before operating the treadmill. 1. It is the responsibility of the owner to ensure 12. Keep the power cord and the surge protector that all users of this treadmill are adequately away from heated surfaces. informed of all warnings and precautions. 13. Never move the walking belt while the power 2. Use the treadmill only as described in t
Streszczenie treści zawartej na stronie nr. 4
22. When using iFIT.com CD’s and videos, an 25. Inspect and tighten all parts of the treadmill electronic “chirping” sound will alert you regularly. when the speed and/or incline of the treadmill is about to change. Always listen for the 26. Never insert or drop any object into any “chirp” and be prepared for speed and/or in- opening. cline changes. In some instances, the speed and/or incline may change before the per- 27.DANGER: Always unplug the power sonal trainer describes the change. cord
Streszczenie treści zawartej na stronie nr. 5
BEFORE YOU BEGIN ® Thank you for selecting the revolutionary NordicTrack 1-888-936-4266, Monday through Friday, 8h00 until EXP2000 treadmill. The EXP2000 treadmill combines 18h30. Eastern Standard Time (excluding holidays). advanced technology with innovative design to help To help us assist you, please note the product model you get the most from your exercise program in the number and serial number before calling. The model convenience of your home. And when you’re not exer- number of the trea
Streszczenie treści zawartej na stronie nr. 6
ASSEMBLY Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench and your own phillips screwdriver and wire cutters . Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt
Streszczenie treści zawartej na stronie nr. 7
4. Slide both of the Electronics Ground Brackets (14) onto A 4 14 one of the Handrail Spacers (65) in the manner shown. 65 Tabs See inset drawing A. Pinch the tabs on the Electronics Ground Brackets (14) to allow the tabs to fit inside the 14 holes in the Upright (69, see inset drawing B). See inset drawing B. Place the Handrail Spacer (65) on B the left Upright (69) as shown, with the cutout on the indi- Cutout cated side. Note: Make sure that the tabs on the Electronics Ground Brackets (14, s
Streszczenie treści zawartej na stronie nr. 8
OPERATION AND ADJUSTMENT TM THE PERFORMANT LUBE WALKING BELT electric shock. This product is equipped with a cord having an equipment-grounding conductor and a Your treadmill features a walking belt coated with grounding plug. Plug the power cord into a surge TM PERFORMANT LUBE , a high-performance lubricant. protector, and plug the surge protector into an ap- Important: Never apply silicone spray or other sub- propriate outlet that is properly installed and stances to the walking belt or the wa
Streszczenie treści zawartej na stronie nr. 9
Program Display Select Record Start Program Incline Speed Speed Pulse Pulse Sensor Sensor Start Stop Note: If there is a thin sheet of clear plastic on the face Clip Key of the console, remove it. FEATURES OF THE CONSOLE The console also features new iFIT.com interactive technology. iFIT.com technology is like having a per- The advanced console offers an impressive selection sonal trainer right in your home. Using the included of features to help you get the most from your exercise. audio cable,
Streszczenie treści zawartej na stronie nr. 10
Plug in the power cord. 2 CAUTION: Before operating the See HOW TO PLUG IN THE POWER CORD on console, read the following precautions. page 8. • Do not stand on the walking belt when turn- ing on the power. Move the on/off switch to the on position. 3 • Always wear the clip (see the drawing below) Locate the on/off switch while operating the treadmill. on the treadmill near the On power cord. Move the Position • Adjust the speed in small increments to on/off switch to the on avoid sudden jump
Streszczenie treści zawartej na stronie nr. 11
Follow your progress with the LED track and HOW TO USE THE MANUAL MODE 5 the displays. Insert the key fully into the console. The LED track—When 1 the manual mode or an See GETTING STARTED on page 10. iFIT.com program is se- lected, the program dis- play will show an LED Select the manual mode. 2 track representing 1/4 mile. As you exercise, the indicators around the When the key is in- Manual Indicator track will light in sequence until you have com- serted, the manual pleted 1/4 mile. A new la
Streszczenie treści zawartej na stronie nr. 12
Speed/Pace display— When you are finished exercising, stop the 7 This display shows the walking belt and remove the key. speed of the walking belt and your current Step onto the foot rails, press the Stop button, and pace (pace is mea- adjust the incline of the treadmill to 1%. The incline sured in minutes per must be at 1% when the treadmill is raised to mile). Every seven seconds, the display will the storage position or the treadmill will be change from one number to the other. damaged. Nex
Streszczenie treści zawartej na stronie nr. 13
Each program is divided into several time seg- If the speed or incline setting for the current ments of different lengths. The Time display segment is too high or too low, you can manually shows both the time remaining in the program and override the setting by pressing the Speed or the time remaining in the current segment. One Incline buttons on the console. Every few times speed setting and one incline setting are pro- one of the Speed buttons is pressed, an additional grammed for each segme
Streszczenie treści zawartej na stronie nr. 14
cline settings are not shown in the program dis- HOW TO CREATE CUSTOM PROGRAMS play.) To program the desired speed and incline settings for the first segment, simply adjust the Insert the key fully into the console. speed and incline of the treadmill to the desired 1 levels with the Speed and Incline buttons. Every See GETTING STARTED on page 10. few times one of the Speed buttons is pressed, an additional indicator will light or darken in the Current Segment column. Select one of the custom pr
Streszczenie treści zawartej na stronie nr. 15
mill will automatically adjust to the speed and in- HOW TO USE CUSTOM PROGRAMS cline settings that you programmed previously. Insert the key fully into the console. The program will continue until the speed setting 1 for the last segment is shown in the Current See GETTING STARTED on page 10. Segment column and no time remains in the Time display. The walking belt will then slow to a stop. Select one of the custom programs. 2 Note: If the program is too easy or too difficult, the speed or incli
Streszczenie treści zawartej na stronie nr. 16
Press the Start Program button or the Speed HOW TO USE THE FITNESS TEST PROGRAM 5 button to start the program. The fitness test program is designed to measure your When the button is relative fitness level. For the best results, the fitness pressed, the Distance/ test program should be used at a time when your en- Laps display will show ergy level is high; the fitness test program should not an “L 1” (level 1), indicat- be used if you have already exercised during the day. ing that the first
Streszczenie treści zawartej na stronie nr. 17
When the cool-down segment is completed, the HOW TO USE THE PULSE-DRIVEN PROGRAM walking belt will slow to a stop. After the fitness test program is com- pleted, your fitness level The pulse-driven program automatically adjusts the will be shown in the speed and incline of the treadmill to keep your heart Time display. There are rate near a target level during your workout. Note: You ten fitness levels— must wear the optional chest pulse sensor to use fitness level 10 (FL:10) the pulse-driven pr
Streszczenie treści zawartej na stronie nr. 18
Press the Start Program button or the Speed 5 If the speed or incline setting for the current seg- button to start the program. ment is too high or too low, you can adjust the set- ting with the Speed or Incline buttons. However, if A moment after the button is pressed, the tread- you decrease the speed, the incline will automati- mill will automatically adjust to the first speed and cally increase; if you increase the speed, the in- incline settings for the program. Hold the handrails cline
Streszczenie treści zawartej na stronie nr. 19
HOW TO CONNECT YOUR PORTABLE STEREO HOW TO CONNECT THE TREADMILL TO YOUR CD PLAYER, VCR, OR COMPUTER Note: If your stereo has an RCA-type AUDIO OUT jack, see instruction A below. If your stereo has a 3,5mm LINE OUT jack, see instruction B. If your To use iFit.com CD’s, the treadmill must be con- stereo has only a PHONES jack, see instruction C. nected to your portable CD player, portable stereo, home stereo, or computer with CD player. See pages A. Plug one end of the audio cable into the jack
Streszczenie treści zawartej na stronie nr. 20
HOW TO CONNECT YOUR HOME STEREO HOW TO CONNECT YOUR COMPUTER Note: If your stereo has an unused LINE OUT jack, Note: If your computer has a 3.5mm LINE OUT jack, see instruction A below. If the LINE OUT jack is see instruction A. If your computer has only a being used, see instruction B. PHONES jack, see instruction B. A. Plug one end of the audio cable into the jack on the A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the front of the tr
