Streszczenie treści zawartej na stronie nr. 1
mobile
MC55
Siemens Cellular Engine
Version: 01.05
DocId: MC55_ATC_V01.05
Streszczenie treści zawartej na stronie nr. 2
MC55 AT Command Set s mobile Document Name: MC55 AT Command Set Version: 01.05 Date: February 10, 2004 DocId: MC55_ATC_V01.05 Status Confidential / Released General Notes Product is deemed accepted by recipient and is provided without interface to recipient’s products. The documen- tation and/or product are provided for testing, evaluation, integration and information purposes. The documen- tation and/or product are provided on an “as is” basis only and may contain deficiencies or inadequa
Streszczenie treści zawartej na stronie nr. 3
MC55 AT Command Set s Contents mobile Contents 1. Introduction............................................................................................................................................ 13 1.1 Scope of the document ................................................................................................................. 13 1.2 Related documents ....................................................................................................................... 14 1.3 D
Streszczenie treści zawartej na stronie nr. 4
MC55 AT Command Set s Contents mobile 2.11.3 Summary of CMS ERRORS related to GSM 07.05 ......................................................... 49 2.12 AT+CSCS Select TE character set ............................................................................................. 52 2.13 AT^SCFG Extended Configuration Setting ................................................................................. 54 2.14 AT^SM20 Set M20 compatibility mode ...............................................
Streszczenie treści zawartej na stronie nr. 5
MC55 AT Command Set s Contents mobile 5.3 AT^SPIC Display PIN counter...................................................................................................110 5.4 AT+CLCK Facility lock .............................................................................................................. 115 5.5 AT^SLCK Facility lock ............................................................................................................... 121 5.6 AT+CPWD Change Password ................
Streszczenie treści zawartej na stronie nr. 6
MC55 AT Command Set s Contents mobile 7.24 AT+CR Service reporting control ..............................................................................................176 7.25 AT+CRC Set Cellular Result Codes for incoming call indication .............................................. 178 7.26 AT+CSNS Single Numbering Scheme...................................................................................... 180 7.27 AT^SCNI List Call Number Information........................................
Streszczenie treści zawartej na stronie nr. 7
MC55 AT Command Set s Contents mobile 10. GPRS Commands................................................................................................................................ 243 10.1 AT+CGACT PDP context activate or deactivate ....................................................................... 243 10.2 AT+CGANS Manual response to a network request for PDP context activation ...................... 245 10.3 AT+CGATT GPRS attach or detach .............................................
Streszczenie treści zawartej na stronie nr. 8
MC55 AT Command Set s Contents mobile 11.19 AT+FOPT Set bit order independently ...................................................................................... 302 11.20 AT+FPHCTO DTE Phase C Response Timeout....................................................................... 303 11.21 AT+FREV Identify Product Revision ......................................................................................... 304 11.22 AT+FRH Receive Data Using HDLC Framing .............................
Streszczenie treści zawartej na stronie nr. 9
MC55 AT Command Set s Contents mobile 14. SIM Application Toolkit (SAT) Commands........................................................................................ 362 14.1 AT^SSTA SAT Interface Activation ........................................................................................... 362 14.2 ^SSTN SAT Notification ............................................................................................................ 364 14.3 AT^SSTGI SAT Get Information .................
Streszczenie treści zawartej na stronie nr. 10
MC55 AT Command Set s Contents mobile 17.3.1 Summary of AT commands available in Charge-only and Alarm mode......................... 432 17.4 AT^SBV Battery/Supply Voltage ............................................................................................... 433 17.5 AT^SCTM Set critical operating temperature presentation mode or query temperature........... 434 17.6 AT^SSYNC Configure SYNC Pin.............................................................................................
Streszczenie treści zawartej na stronie nr. 11
MC55 AT Command Set s List of Tables mobile List of Tables Table 1.1: Symbols used to indicate the correlations with other commands............................................... 16 Table 1.2: Symbols used to mark different types of default values of parameters ..................................... 16 Table 2.1: Current configuration on ASC0 / MUX channel 1 (example) ...................................................... 32 Table 2.2: Current configuration on ASC1 and MUX channels 2 and 3 (examp
Streszczenie treści zawartej na stronie nr. 12
MC55 AT Command Set s List of Figures mobile List of Figures Figure 1.1: Main character table of GSM 03.38 alphabet ............................................................................. 21 Figure 1.2: Extension character table of GSM 03.38 alphabet ..................................................................... 22 Figure 16.1: Audio programming model........................................................................................................ 392 MC55_ATC_V01.05 Page 12 o
Streszczenie treści zawartej na stronie nr. 13
MC55 AT Command Set s 1. Introduction mobile 1. Introduction 1.1 Scope of the document This document presents the AT Command Set for the Siemens Cellular Engine MC55 Version 01.05. Before using the Cellular Engine or upgrading to a new firmware version please read the latest product informa- tion provided in the Release Notes [1]. More information is available at the Siemens Website: http://www.siemens.com/wm. MC55_ATC_V01.05 Page 13 of 469 2/10/04 Confidential / Released
Streszczenie treści zawartej na stronie nr. 14
MC55 AT Command Set s 1.2 Related documents mobile 1.2 Related documents [1] Release Notes: MC55, Version 01.05 [2] MC55 Hardware Interface Description, Version 01.05 [3] GPRS Startup User's Guide [4] Remote-SAT User's Guide [5] Multiplexer User's Guide [6] Application Note 16: Updating MC55 Firmware [7] Application Note 02: Audio Interface Design [8] Multiplex Driver Developer's Guide for Windows 2000 and Windows XP [9] Multiplex Driver Installation Guide for Windows 2000 and Windows XP [10]
Streszczenie treści zawartej na stronie nr. 15
MC55 AT Command Set s 1.3 Document conventions mobile 1.3 Document conventions Throughout the document, the GSM engines are referred to as ME (Mobile Equipment), MS (Mobile Station), TA (Terminal Adapter), DCE (Data Communication Equipment) or facsimile DCE (FAX modem, FAX board). To control your GSM engine you can simply send AT Commands via its serial interface. The controlling device at the other end of the serial line is referred to as TE (Terminal Equipment), DTE (Data Terminal Equipment
Streszczenie treści zawartej na stronie nr. 16
MC55 AT Command Set s 1.3 Document conventions mobile 1.3.2 Superscript notation for parameters and values Table 1.1: Symbols used to indicate the correlations with other commands Parameter option Meaning (&W) Parameter value will be stored with AT&W (&V) Parameter value will be displayed with AT&V (ˆSNFW) Parameter value will be stored with AT^SNFW (+CSCS) Parameter value has to be (is) coded according to current setting of (see AT+CSCS for details) T
Streszczenie treści zawartej na stronie nr. 17
MC55 AT Command Set s 1.4 AT command syntax mobile 1.4 AT command syntax The "AT" or "at" prefix must be set at the beginning of each command line. To terminate a command line enter . Commands are usually followed by a response that includes "". Throughout this document, only the responses are presented, are omitted intentionally. Types of AT commands and responses: AT command type Syntax Function Test command AT+CXXX=? The mobile equipment returns the
Streszczenie treści zawartej na stronie nr. 18
MC55 AT Command Set s 1.4 AT command syntax mobile Example 1: Omitting parameters in the middle of a string AT+CCUG? Query current setting +CCUG: 1,10,1 OK AT+CCUG=,9 Set only the middle parameter OK AT+CCUG? Query new setting +CCUG: 1,9,1 OK Example 2: Using default parameter values for optional parameters AT+CFUN=5,0 Activate CYCLIC SLEEP mode, don't reset ME OK AT+CFUN? Query ME mode +CFUN: 5 OK AT+CFUN= Set ME back to normal (default parameters: 1,0) OK +CFUN: 1 OK 1.4.2 Combining AT com
Streszczenie treści zawartej na stronie nr. 19
MC55 AT Command Set s 1.5 Supported character sets mobile 1.5 Supported character sets The ME supports two character sets: GSM 03.38 (7 bit, also referred to as GSM alphabet or SMS alphabet) and UCS2 (16 bit, refer to ISO/IEC 10646). See AT+CSCS for information about selecting the character set. Character tables can be found below. Explanation of terms •IRA IRA means that one byte is displayed as two characters in hexadecimal format. for example, the byte 0x36 (decimal 54) is displayed as "3
Streszczenie treści zawartej na stronie nr. 20
MC55 AT Command Set s 1.5 Supported character sets mobile GSM 03.38 GSM character Corresponding ASCII Hex Esc character hex. value ASCII character Esc sequence sequence Ö 5C \ \5C 5C 35 43 " 22 " \22 5C 32 32 ò 08 BSP \08 5C 30 38 @ 00 NULL \00 5C 30 30 CAUTION: Often, the editors of terminal programs do not recognize escape sequences. In this case, an escape sequence will be handled as normal characters. The most common workaround to this problem is to write a script which includes a decimal
