Instrukcja obsługi Agilent Technologies B

Streszczenie treści zawartej na stronie nr. 1

Agilent 86100A/B Series
Plug-in Modules
Installation Guide

Streszczenie treści zawartej na stronie nr. 2

Installation Guide Installation Instructions Installation Instructions This plug-in module is designed for use with the Infiniium DCA Agilent 86100A/B wide-bandwidth oscilloscope. To install the module into the Infiniium DCA 1 Slide the module into an available front-panel slot. You can remove or install a module while the instrument is in operation. 2 Finger tighten the two knurled screws on the module’s front panel. Up to two modules can be inserted into the Infiniium DCA. All documentatio

Streszczenie treści zawartej na stronie nr. 3

Installation Guide Installation Instructions Using an Agilent 86100A The following modules require that firmware revision A.03.04 or later be installed in the Agilent 86100A/B: 83494A, Option 103 and Option 107 86102A 86103B 86105B 86107A 86111A 86111U 86113A 86115B 86116A 86116B 86117A 86117B 86118A The firmware upgrade is enclosed in the module shipping container. Agilent recommends that you use the latest version of firmware. To learn more about firmware upgrades, available modules, or the

Streszczenie treści zawartej na stronie nr. 4

Installation Guide General Safety Considerations General Safety Considerations This product has been designed and tested in accordance with IEC Publica- tion 1010, Safety Requirements for Electronic Measuring Apparatus, and has been supplied in a safe condition. The instruction documentation contains information and warnings which must be followed by the user to ensure safe operation and to maintain the product in a safe condition. Install the plug-in module according to the enclosure protect

Streszczenie treści zawartej na stronie nr. 5

Installation Guide General Safety Considerations CAUTION Electrical channel input circuits and the trigger input circuit can be damaged by electrostatic discharge (ESD). Therefore, avoid applying static discharges to the front-panel input connectors. Prior to connecting any coaxial cable to the connectors, momentarily short the center and outer conductors of the cable together. Avoid touching the front-panel input connectors without first touching the frame of the instrument. Be sure that t

Streszczenie treści zawartej na stronie nr. 6

Installation Guide Declaration of Conformity Declaration of Conformity 6

Streszczenie treści zawartej na stronie nr. 7

Installation Guide Regulatory Information Regulatory Information Radio-Frequency Electromagnetic Field Immunity - IEC 61000-4-3: 1995 passes criterion B According to IEC 61000-4-3: 1995, degradation of system noise perfor- mance may be observed in some narrow frequency ranges when a 3 V/m radio-frequency electromagnetic field is applied to the 86100A,B mainframe with an 86102U, 86106B, or 86107A module installed. Radio-Frequency Electromagnetic Field Immunity - IEC 61000-4-3: 1995 passes cri

Streszczenie treści zawartej na stronie nr. 8

Notices © Agilent Technologies, Inc. 2000-2002 Warranty Safety Notices The material contained in this document CAUTION No part of this manual may be repro- is provided “as is,” and is subject to being Caution denotes a hazard. It calls attention duced in any form or by any means changed, without notice, in future edi- to a procedure which, if not correctly per- (including electronic storage and tions. Further, to the maximum extent formed or adhered to, could result in retrieval or transla