Streszczenie treści zawartej na stronie nr. 1
CR9976
Auto Set Dual Alarm
CD Clock Radio
Please read this manual before use
cr9976 instruction book.PMD 1 3/16/2004, 1:17 PM
ROBERTS
Sound for Generations
Streszczenie treści zawartej na stronie nr. 2
Contents Contents ............................................................................ 1 Programmed play ............................................................ 15 Controls .......................................................................... 2-3 Checking a programme ................................................... 15 Switching on ......................................................................4 Erasing a programme ......................................................
Streszczenie treści zawartej na stronie nr. 3
Controls 6 7 8 9 10 11 12 13 14 15 16 17 5 18 4 3 19 2 20 1 21 1. Snooze button 7. PM indicator 13. Tuning scale 19. Down/B.Skip button 2. Stop button 8. LED display 14. Low battery indicator 20. Play/Pause button 3. CD mode/Year button 9. Random indicator 15. Power button/indicator 21. Memory/Time zone button 4. Repeat/Week button 10. Repeat indicator 16. Time set button 5. CD display/Date button 11. Memory indicator 17. Up/F.Skip button 6. Alarm indicator 12. FM Stereo indicator 18. Sleep butt
Streszczenie treści zawartej na stronie nr. 4
Controls 22 26 23 24 27 28 25 22. Alarm 1 function switch 26. Tuning control 23. Alarm 2 function switch 27. Function switch 24. Alarm mode switch 28. Volume control 25. Headphone socket 3 cr9976 instruction book.PMD 4 3/16/2004, 1:17 PM
Streszczenie treści zawartej na stronie nr. 5
Switching on 1. Place your CD clock radio on a flat surface. Plug the power cord into the wall socket and switch on. 2. After a few seconds the time, day, date and year will set automati- cally. Your clock radio is fitted with a long life back-up battery to maintain the factory set time, day and date. Your CD clock radio will automatically adjust for summer/winter time. See section on Backup battery on pages 19 and 20. Should the time require adjustment follow the procedure shown in the next s
Streszczenie treści zawartej na stronie nr. 6
Setting the year 1. Ensure that power is switched off - Power indicator not lit 3 2 1 2. Press and hold down the CD Mode/YEAR button. 3 3. Whilst holding down the CD Mode/YEAR button set the year using the UP/F.Skip or DOWN/B.Skip buttons Setting the date 1. Ensure that power is switched off - Power indicator not lit 3 2 1 2. Press and hold down the CD Display/DATE button. 3 3. Whilst holding down the CD Display/DATE button set the date using the UP/F.Skip or DOWN/B.Skip buttons . 5 cr9976 inst
Streszczenie treści zawartej na stronie nr. 7
Checking the year 1. Ensure that your CD clock radio is switched off (power indicator not 1 lit) 2 2. Press and hold down the CD Mode/YEAR button, the display will change to showing current year. 3. Release the CD Mode/YEAR button to return display to showing current time. Checking the date 1. Ensure that your CD clock radio is switched off (power indicator not lit) 1 2 2. Press and hold down the CD Display/DATE button, the display will change to showing current date. 3. Release the CD Display
Streszczenie treści zawartej na stronie nr. 8
Setting alarm times The alarms can be set to wake you by a buzzer, CD or the radio. Your 2 CD clock radio has two separate alarms which can be set to activate at different times. 1 Setting alarm 1 2 1. Slide the Alarm 1 function switch to the 'Adj' position. 2. Press the UP/F.Skip or DOWN/B.Skip buttons to set the alarm 1 time. Release the buttons when the correct time is reached. The clock uses a 12 hour display with a PM indicator. Ensure that the correct 12 hour cycle is selected. 3. Return
Streszczenie treści zawartej na stronie nr. 9
Setting the alarm mode Your clock radio has five different alarm modes for each of the alarms. The alarm modes are Everyday - the alarm will switch-on everyday; Sunday only - the alarm will switch-on on Sunday only; Weekdays only - the alarm will switch-on on Monday to Friday only; Weekends only - the alarm will switch-on on Saturday and Sunday only and Monday to Saturday - the alarm will switch-on on Monday to Saturday only. 2 1 Everyday is shown as 1-7 on the display; Weekday alarm is shown
Streszczenie treści zawartej na stronie nr. 10
Checking the Alarm Times 1. To check alarm 1 time, set the Alarm 1 function switch to the 'Adj' position. Alarm 1 time will appear in the display. 2. Return the Alarm 1 function switch to the 'Off' position. The 1 display will revert to showing time. 3. To check alarm 2 time, set the Alarm 2 function switch to the 'Adj' position. Alarm 2 time will appear in the display. 4. Return the Alarm 2 function switch to the 'Off' position. The display will revert to showing time. 2 Note: Incorrect display
Streszczenie treści zawartej na stronie nr. 11
Listening to the Radio 1. Switch on your CD clock radio by pressing the Power button. The Power indicator LED will light. 1 2. Slide the Function switch to the required waveband. 2 3. Tune in to the desired station by rotating the Tuning control. The station frequency is indicated in the dial scale. The Wire aerial located on the rear of your CD clock radio is for FM reception. The wire should be fully extended and positioned for optimum reception. For MW reception there is a built in ferrite ae
Streszczenie treści zawartej na stronie nr. 12
Compact discs Use only Digital Audio CDs which have the symbol. Never write on a CD or attach any sticker to the CD. Always hold the CD at the edge and store it in its box after use with the label facing up. To remove dust and dirt, breathe on the CD and wipe it with a soft, lint- free cloth in a straight line from the centre towards the edge. Cleaning agents may damage the CD Do not expose the CD to rain, moisture, sand, or to excessive heat. (e.g. from heating equipment or in motor cars parke
Streszczenie treści zawartej na stronie nr. 13
Playing a CD 1. Whilst the CD is in stop mode press the Play/Pause button to start playback. The display will show the track number. After a short time the display will revert to showing time. 1 2 2. Set the Volume control to the required setting. 3. To display the CD track number press the CD Display/Date button. After a short time the display will revert to showing time. 3 4. To pause playback press the Play/Pause button. The track number will flash in the display. To resume playback press th
Streszczenie treści zawartej na stronie nr. 14
Selecting a track 1. Whilst the CD is playing, press either the UP/F.skip or Down/B.skip buttons to change to the desired track. You can also skip tracks 1 when the player is in stop mode. Skip to the desired track using the UP/F.skip or Down/B.skip buttons. 2 1 2. Press the Play/Pause button to play the selected track. Search function 1. Whilst the CD is playing, press and hold down either the UP/F.skip or Down/B.skip buttons. Release the button when the desired part of the track is reached. 1
Streszczenie treści zawartej na stronie nr. 15
CD Mode Your CD clock radio has three CD play modes: Normal, Random and Memory. 1. Ensure your CD clock radio is in CD stop mode 2. If you have not programmed any tracks then pressing the CD Mode/ YEAR button will toggle between the following modes:- 1 2 Normal Random 3. If CD tracks have been previously programmed then pressing the CD Mode/YEAR button will toggle between the following modes:- 3 Normal Random Memory CD random play 1. Whilst the CD is in stop mode, press the CD Mode/YEAR button
Streszczenie treści zawartej na stronie nr. 16
Programmed play By programming the player you can play up to 20 tracks in any desired order. 1 1. Whilst the CD is in STOP mode, press the Memory/TIME ZONE button. The display will show ‘ P 01’. 2. Select the first track using the UP/F.skip or Down/B.skip buttons. 2 The track number will flash on the display. Store this track by pressing the Memory/TIME ZONE button. 2 3. Repeat the above steps until you have completed your program. Press the Play/Pause button to commence play of the selected tr
Streszczenie treści zawartej na stronie nr. 17
Setting the alarms to wake to buzzer 1. Set the alarm time as previously described and ensure alarm mode is set for correct days of week. Set the Alarm function switch to the 'Buzz' position. Set the Alarm 1 or Alarm 2 selector switch to the 'On' position. The Alarm indicator will light. 1 1 2. Press the Power button to switch off your CD clock radio. Important: failure to switch off the power will result in non operation of the alarm. 3. The buzzer alarm will sound at the preset time for 60 m
Streszczenie treści zawartej na stronie nr. 18
Setting the alarms to wake to CD 1. Set the alarm time as previously described. Set the Alarm function switch to the 'Music' position. 1 2. Set the Alarm 1 or Alarm 2 selector switch to the 'On' position. The Alarm indicator will light. 2 3. Set the Function switch to the 'CD' position, insert a CD and ensure that the Volume control is set to the desired level. 4. Press the Power button to switch off your CD clock radio, the Power indicator will switch off. Important: failure to switch off the p
Streszczenie treści zawartej na stronie nr. 19
Snooze control 1. The CD radio or buzzer alarm can be silenced for 9 minutes by pressing the Snooze button. This sequence can be repeated whilst the alarm is sounding. 1 Sleep timer You can program you clock radio to play the CD or radio for up to a maximum 90 minutes and then switch off. 2 1. Press the Sleep button. The display will show the sleep time (default is 2 minutes). 1 2. To increase or decrease the amount of time the radio will play before 2 switching off, hold down the Sleep button
Streszczenie treści zawartej na stronie nr. 20
Headphones A Headphone Socket (3.5mm located on left side) is provided for use with either headphones or an earpiece. Inserting a plug automatically mutes the internal loudspeakers. Backup battery As with all batteries, eventually the built in lithium battery will need to be replaced. A number of factors, such as the length of time between the date your clock radio was manufactured and the date you plugged it in for the first time, determine the amount of time before replacement. During this ini
