Streszczenie treści zawartej na stronie nr. 1
�� � � �
®
The Bowflex Sport
Home Gym
Assembly Instructions
��� ������������
001-6961 Rev B (06-19-06)
Streszczenie treści zawartej na stronie nr. 2
Table of Contents Safety Precautions 1 Get to Know Your Machine 2 Basic Assembly Principles 3 Parts List 3 Hardware List 3 Accessory List 3 Hardware Guide 4 Tools You Will Need 4 Assembly Guide 5 Important Contact Numbers 20
Streszczenie treści zawartej na stronie nr. 3
Safety Precautions • Always read and follow the Warning and Safety • This machine is meant for individual consumer use ® labels attached to your Bowflex Sport home only, and is not meant for use by institutions. gym. Do not remove these labels. If you need ® • Maximum user weight for the Bowflex Sport replacement labels, please call a Nautilus home gym is 300 pounds (136 kg). For your safety, Representative at (800) 605-3369. do not use or allow others to use the Bowflex • Read the own
Streszczenie treści zawartej na stronie nr. 4
Get to Know Your Machine CONGRATULATIONS on your commitment to improving your With all of the fitness choices available today, finding the ® health and fitness! With the Bowflex Sport home gym, you best workout equipment for your needs can be confusing. have everything you need to exceed all of your physical fitness, Everyone at Nautilus would like to congratulate you and thank ® strength and health expectations! you for selecting the Bowflex Sport home gym. ® ® The Bowflex Sport home gym
Streszczenie treści zawartej na stronie nr. 5
Get To Know Your Machine Basic Assembly Principles Here are a few basic tips that will make your assembly of the Bowflex Sport® home gym quick and easy. By using these principles, you can simplify each process and save yourself extra time and effort. 1. To make the assembly process go faster, gather the pieces you need for each step and thoroughly read the assembly instructions for that step prior to starting assembly for the step. 2. When tightening a locknut on a bolt, use a combination wr
Streszczenie treści zawartej na stronie nr. 6
Hardware Guide Tools You Will Need You will need the following tools to complete the assembly of your Bowflex Sport® home gym. If you don’t have these tools, you can find them at any hardware or department store for a reasonable price. • 1/2" combination wrench • Rubber mallet (optional) • 9/16" combination wrench • Utility Knife or Scissors Note: Drawings are actual size • Phillips screw driver • (2) Allen Wrenches (included) Item #: A Item #: E Item #: L Item # N Qty.: 4 Qty.: 10 Item #: M
Streszczenie treści zawartej na stronie nr. 7
Assembly Guide Step 1 - Attach the Lower Lat Tower to the Base Figure 1 Platform Locate the following items: Mounting Forward Channels • Item #1 - Lower Lat Tower Screws • Item #2 - Base Platform H • Item #H - (4) 3/8" X 3" Button Head Screws • Item #N - (8) 3/8" Washers N • Item #O - (4) 3/8" Nylock Nuts Set the Base Platform (Item #2) onto the floor as shown in Figure 1. Line up the bolt holes in the mounting channels 1 on the Lower Lat Tower (Item #1) with the holes in the Base Pl
Streszczenie treści zawartej na stronie nr. 8
Assembly Guide Figure 3a Step 3 - Attach the Squat Platform to the Main Assembly Base Platform/Lower Lat Tower Assembly Locate the following items: O • From Step 2 - Base Platform/Lat Tower (Main) Assembly • Item #5 - Squat Platform • Item #I - (2) 3/8" X 3 1/4" Button Head Screws • Item #N - (4) 3/8" Washers • Item #O - (2) 3/8" Nylock Nuts N • Item #Q - (4) Bolt Covers I With the Base Frame/Lower Lat Tower (Main) Bolt Holes Assembly (from Step 2) on the floor, carefully lift up the fron
Streszczenie treści zawartej na stronie nr. 9
Assembly Guide Figure 4 Step 4 - Attach the Chest Bar with Pulleys to the Main Assembly Locate the following items: Chest Bar K Brackets • From Step 3 - Main Assembly • Item #6 - Chest Bar w/ Pulleys - Do not unwrap cables! 6 • Item #K - (2) 3/8" X 5" Button Head Screws • Item #N - (4) 3/8" Washers • Item #O - (2) 3/8" Nylock Nuts N Line up the bolt holes in the brackets on the Chest Bar with Pulleys (Item #6) with the lowest bolt holes on the Lower Lat Tower, as shown in Figure 4. Pulle
Streszczenie treści zawartej na stronie nr. 10
Assembly Guide Step 6 - Attach the Seat Rail to the Seat Assembly Figure 6 Locate the following items: • From Step 5 - Seat Pad/Seat Bracket Assembly Seat Pad/Seat • Item #9 - Seat Rail Bracket Assembly Undo the twist ties from the Rail Pivot Bushings and remove the Bushings. Set aside until the end of this step. Rail Pivot Bushings Line up the Seat Rail (Item #9) with the Seat Assembly (from Step 9 5). Orient the Seat Rail so that the Pull Pin on the Seat Bracket is on the same side as
Streszczenie treści zawartej na stronie nr. 11
Assembly Guide Step 8 - Attach the Rear Leg to the Seat Rail Figure 8 Locate the following items: • From Step 6 - Seat Rail Assembly • From Step 7 - Rear Leg Assembly • Item #J - (1) 3/8" X 4 1/4" Button Head Screw End • Item #N - (2) 3/8" Washers Bracket • Item #O - (1) 3/8" Nylock Nut • Item #Q - (2) Bolt Covers O Rail Assembly Undo the twist ties from the Pivot Bushings on the end of the Rear N Leg Assembly (from Step 6), but do not remove the Bushings. Note: When attaching the Rear L
Streszczenie treści zawartej na stronie nr. 12
Assembly Guide Step 9 - Attach the Seat Rail to the Main Assembly Figure 9 Locate the following items: Main • From Step 4 - Main Assembly Assembly • From Step 8 - Seat Rail Assembly • Item #12 - Seat Rail Knob • Item #J - (1) 3/8" X 4 1/4" Button Head Screw • Item #N - (2) 3/8" Washers • Item #O - (1) 3/8" Nylock Nut Seat Rail • Item #Q - (1) Bolt Cover Bracket 12 J Align the holes on the Seat Rail Assembly (from Step 8) with the holes in the Rail Bracket on the Main Assembly Rail A
Streszczenie treści zawartej na stronie nr. 13
Assembly Guide Step 10 - Attach the Leg Extension Pivot Tube Figure 10a Bracket G Locate the following items: N • Item #13 - Leg Extension Pivot Tube O • From Step 9 - Main Assembly • Item #30 - Lock Out Pin • Item #G - (1) 3/8" X 2 3/4" Button Head Screw “Curve” • Item #N - (2) 3/8" Washers • Item #O - (1) 3/8" Nylock Nut • Item #Q - (1) Bolt Cover 13 Undo the twist ties from the Pivot Bushings. Align the holes located on the “curve” of the Leg Extension Pivot Tube (Item #13) with the hol
Streszczenie treści zawartej na stronie nr. 14
Assembly Guide Step 11 - Attach the Rollers to the Leg Extension Figure 11 18 Locate the following items: 15 17 • From Step 10 - Main Assembly • Item #14 - Foam Rollers • Item #15 - Foam Roller End Caps • Item #16 - Short Chrome Roller Tubes • Item #17 - Long Chrome Roller Tube • Item #18 - Roller Tube Spacers 14 There are (3) Chrome Roller Tubes on the Leg Extension. Place the Long Chrome Roller Tube (Item #17) through the hole closest to the Seat. There are two holes possible in the Leg
Streszczenie treści zawartej na stronie nr. 15
Assembly Guide Figure 13 Step 13 - Assemble the Leg Extension Seat C Locate the following items: • Item #19 - Leg Extension Seat Pad 21 M • Item #21 - Leg Extension Seat Support Tube Rail • Item #C - (4) 5/16" X 3/4" Button Head Screws Bracket • Item #M - (4) 5/16" Washers Place the Leg Extension Seat Pad (Item #19) cushion-side down. Align the holes in the Leg Extension Seat Support Tube (Item #21) with the holes on the underside of the Seat Pad. Place (4) 5/16" Washers (Item #M) over
Streszczenie treści zawartej na stronie nr. 16
Assembly Guide Figure 14 Leg Extension Step 14 - Attach the Leg Extension Seat to the Main Seat Assembly Back Edge Locate the following items: • From Step 13 - Leg Extension Seat Assembly • From Step 12 - Main Assembly Support Tube Bracket Hooks The Leg Extension Seat Assembly is removable, and can be attached to the Rear Leg Assembly easily by placing the Rail Bracket Hooks over the Rear Rollers. Place the Rail Bracket Hooks onto the Roller Tube Spacers Roller Tube (sandwiched betwee
Streszczenie treści zawartej na stronie nr. 17
Assembly Guide Figure 16 Step 16 - Attach the Upper Lat Tower to the Lower Locate the following items: Upper Lat Tower • From Step 15 - Upper Lat Tower Assembly • From Step 14 - Main Assembly • Item #E - (6) 3/8" X 3/4" Button Head Screw • Item #N - (6) 3/8" Washers N Carefully insert the end of the Upper Lat Tower into the E open end of the Lower Lat Tower. Align the holes on the Upper Lat Tower with the holes on the Lower Lat Tower. Place (6) 3/8" Washers (Item #N) over the ends of (6
Streszczenie treści zawartej na stronie nr. 18
Assembly Guide Step 18 - Attach the Rod Box Frame to the Lat Tower Figure 18 Locate the following items: • From Step 16 - Main Assembly • From Step 17 - Rod Box/Frame Assembly K • Item #K - (2) 3/8" X 5" Button Head Screws Rod Box • Item #N - (4) 3/8" Washers Brackets N • Item #O - (2) 3/8" Nylock Nuts Align the bolt holes on the Rod Box brackets with the bolt holes on the Lat Tower above the Chest Bar , as shown in Figure 18. Place (2) 3/8" Washers (Item #N) over the ends of (2) 3/8" X
Streszczenie treści zawartej na stronie nr. 19
Assembly Guide Step 20 - Attach the Faceplate Back Panels Figure 20 Locate the following items: 28 • Item #27 - Faceplate Right Back Panels 27 • Item #28 - Faceplate Left Back Panels A • From Step 19 - Main Assembly • Item #A - (2) #10 Phillips Head Screws Slide each Faceplate Back Panel (Items #27 & 28), textured side out, against the textured (back) side of the Faceplate. The screw heads of the (2) Phillips Head Screws installed during Step 19 should allow the Back Panels to slide beneat
Streszczenie treści zawartej na stronie nr. 20
Assembly Guide Figure 22 Step 22 - Attach the Bench to the Seat Assembly Locate the following items: • Item #29 - Bench Pad • From Step 6 - Seat Assembly The Bench easily attaches and releases from the Seat. To 29 attach the Bench, insert the half hinge on the end of the Bench into the half hinge on the seat. To remove the Bench, lift up on the long portion and pull away from Seat. Note: At this time, carefully go over your entire Bowflex Sport® Home Gym, tightening all screws, nuts a
