Streszczenie treści zawartej na stronie nr. 1
10.8 VOLT CORDLESS DRILL/DRIVER
Model 96299
OPERATING INSTRUCTIONS
Diagrams within this manual may not be drawn proportionally.
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
Distributed exclusively by Harbor Freight Tools .
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
Read this material before using this product.
Failure to do so can result in serious injury.
SaVe THiS manual.
© ®
Cop
Streszczenie treści zawartej na stronie nr. 2
PRODUCT SPECIFICATIONS Power Source 1.3Ah Battery Charge Time 5-7 Hours, after initial charge Charger Input 120V ~60Hz ® Chuck Type 3/8” Jacobs Keyless Chuck Torque Settings 23 clutch settings/1 drill setting Variable Speed 0-500 RPM Maximum Torque 80 in./lb. Reversible Yes Trigger Lock Yes Weight 2.2 Pounds 1 Hex shank adapter Includes 6 Phillips head bits 3 flat head bits Save This Manual You will need this manual for the safety warnings and precautions, assembly, oper- ating, inspection, main
Streszczenie treści zawartej na stronie nr. 3
Electrical Safety 1. Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. There is an increased risk of electric shock if your body is grounded. 2. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. 3. Do not abuse the Charger’s power cord. Never use the Power Cord to carry the Charger or pull the Plug from an outlet. Keep the Power Cord away from heat, oil, sharp edges, or
Streszczenie treści zawartej na stronie nr. 4
4. Remove the battery from the tool and set the Rotation Button (6) to the cen- ter, locked position, before making any adjustments, changing accessories, or storing the tool. These preventive safety measures reduce the risk of starting the tool accidentally. 5. Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users. 6. Maintain the Cordless Drill/Driver with care. Keep drill bits sharp and clean. Properly maintained acc
Streszczenie treści zawartej na stronie nr. 5
4. Hold the tool by its insulated gripping surfaces when performing an opera- tion where the Cordless Drill/Driver may contact hidden wiring. Contact with a “live” wire will make exposed metal parts of the Cordless Drill/Driver “live” and shock the operator. 5. Do not use the Cordless Drill/Driver or Charger if it has been dropped, dam- aged, left outdoors, or immersed in liquid. 6. To avoid electric shock, do not pull or carry the Charger by its Power Cord or pull the Power Cord around shar
Streszczenie treści zawartej na stronie nr. 6
GROUNDING WARNING! Improperly connecting the grounding wire can result in the risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the power cord plug provided with the tool. Never remove the grounding prong from the plug. Do not use the tool if the power cord or plug is damaged. If damaged, have it repaired by a service facil- ity before use. If the plug will not fit the outlet, have a proper outlet
Streszczenie treści zawartej na stronie nr. 7
2. Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See Figure B.) ExTENSION CORDS 1. Grounded tools require a three wire extension cord. Double Insulated tools can use either a two or three wire extension cord. 2. As the distance from the supply outlet increases, you must use a heavier gauge extension cord. Using extension cords with inadequately sized wire causes a seri- ous drop in voltage, resulting in loss of power and possible
Streszczenie treści zawartej na stronie nr. 8
SyMBOLOGy Double Insulated Canadian Standards Association Underwriters Laboratories, Inc. Volts Alternating Current V~ Amperes A No Load Revolutions per Minute (RPM) n xxxx/min. 0 UNPACKING When unpacking, check to make sure that the product is complete and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. Lithium Battery Charging Safety 1. Do not leave unattended while charging. 2. Battery char
Streszczenie treści zawartej na stronie nr. 9
CHARGING 1. The Battery Pack (19) requires charging before the initial use. The recommended initial charge time is twelve hours, prior to initial use of the Cordless Drill/Driver. Place the Charger on a solid surface such as a garage floor; never on anything flammable. Note: Always switch to a fresh battery when tool performance begins to diminish. Severe heat is destructive to batteries; the more heat generated, the faster the battery will lose power. A battery that gets too hot can b
Streszczenie treści zawartej na stronie nr. 10
OPERATING INSTRUCTIONS NOTE: For additional information regarding the parts listed in the following pages, refer to the Parts List & Assembly Diagram. WARNING! Remove the Battery Pack (19) from the tool and set the Rotation Button (6) to its center, locked, position before making any adjustments, changing acces- sories, or storing the tool. Gear Box with Chuck (1) Torque Ring (2) Rotation Button (6) Trigger (12) Battery Pack (19) 1. In order to use the included screwdriver bits, you must fi
Streszczenie treści zawartej na stronie nr. 11
Torque Settings: Use one of the 23 settings (1-23) for screwdriver usage. Use the Drill Bit setting for use with drill bits. The different sizes of screws pictured on the Ring are an indication of how much torque the Cordless Drill/Driver will apply to the bit before the clutch slips, allowing the bit to stop and helping to prevent damage to the screw, bit, or workpiece. The larger the screw, the more torque is applied before the clutch slips. Unless when drilling, always start with a l
Streszczenie treści zawartej na stronie nr. 12
14. Operate the Drill by squeezing the Trigger (12). The speed of the Drill can be con- trolled by varying the pressure on the Trigger. 15. If the clutch starts slipping before the screw is in all the way, stop the drill, put the Rotation Button (6) in the center position and change the torque setting. Reset the rotation direction before continuing. 16. If Drilling: Use the Drill torque setting, as described above. Drill only as deep as necessary. Do not drill deeper than necessary into wal
Streszczenie treści zawartej na stronie nr. 13
PARTS LIST Part Description Qty Part Description Qty 1 Chuck 1 13 Left Plate 1 2 Gear Box with Torque Ring 1 14 Left Body 1 3 Screw 7 15 Black Wire 1 4 Right Body 1 16 Red Wire 1 5 Screw 4 17 Bracket 1 6 Rotation Button 1 18 Contact Plate 2 7 Clear Soft Grip 1 19 Battery Pack 1 8 Right Plate 1 20 Charger 1 9 Tube 1 21 Adapter 1 10 Black Wire 1 22 Bit Adapter 1 11 Red Wire 1 23 Screwdriver Bits (in holder) 1 set 12 Trigger 1 ASSEMBLy DIAGRAM 3 4 5 1 6 7 2 15 8 16 9 17 18 19 11 10 12 13 14 22 23
Streszczenie treści zawartej na stronie nr. 14
PLEASE READ THE FOLLOWING CAREFULLy THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEM
