Streszczenie treści zawartej na stronie nr. 1
Cradle Swing
Cradle
Swing
(Seat moves side to side)
(Seat moves front to back)
Model Number: B0639
Please keep this instruction sheet for future reference, as it contains important information.
Adult assembly is required.
Tools needed for assembly: Phillips Screwdriver and Adjustable Wrench (both not included).
Requires four “D” (LR20) alkaline batteries for operation (not included).
Maximum Weight Limit: 24 lbs. (10.9 kg.)
IMPORTANT! If your child weighs less than 24 lbs., but is really active
Streszczenie treści zawartej na stronie nr. 2
Warning and Caution One (1) Year Limited Warranty WARNING Fisher-Price, Inc., 636 Girard Avenue, East Aurora, New York 14052, warrants that the Cradle Swing is free from all defects •To prevent falls, never use with in material and workmanship when used under normal condi- tions for a period of one (1) year from the date of purchase. an active child who may be able Should the product fail to perform properly, we will repair or to climb out of the seat. replace it at our option, free of charge.
Streszczenie treści zawartej na stronie nr. 3
Parts Motorized Frame Tray 4 Toys (Toys may be different than shown.) Pad Seat Tube 2 Upper Legs Arm Seat with Restraint System 2 Feet 2 Lower Legs 1 #8 x /2" Screw - 2 M4 x 31.5 mm Bolt - 2 M4 Lock Nut - 2 ALL SHOWN ACTUAL SIZE 3
Streszczenie treści zawartej na stronie nr. 4
Assembly IMPORTANT! Before each use or assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed. Never substitute parts. Motorized Frame 1 #8 x /2" Screw - 2 SHOWN ACTUAL SIZE L Foot Lower Leg Tube R Elbow Foot Button Red Dot Hole 3 1 •Locate the R and L on the underside of each elbow foot. The R indicates the right leg. The L indicates th
Streszczenie treści zawartej na stronie nr. 5
Assembly Seat Ruffle Waist Belts Seat Slot Crotch Belt Pad Slots 5 7 •Position the seat upright. •Place the pad onto the seat with the ruffle toward the top of the seat. •Fold the bottom of the pad up. Insert the crotch belt through •Fold the top of the pad down. Insert the waist belts through the slot in the pad. Make sure the crotch belt is not twisted. the slots in the pad. Make sure the waist belts are not twisted. Hole Hole Elastic Loops 8 Peg 6 Elastic Loops •Turn the seat upright. •Fit t
Streszczenie treści zawartej na stronie nr. 6
Assembly M4 x 31.5 mm Bolt Rounded Side Tray M4 Lock Nut Shown Actual Size Slot 9 11 •Turn the seat upright. • Insert the tray tabs into the slots in each side of the seat. • Insert an M4 x 31.5 mm bolt through the seat tube arm and seat tube. •Attach an M4 lock nut to the bolt. Make sure the rounded side of the lock nut faces out. •Using an adjustable wrench, hold the lock nut in place. Then using a Phillips screwdriver, tighten the bolt. Do not over-tighten. Seat Tube Arm Hole Press Motorized
Streszczenie treści zawartej na stronie nr. 7
Assembly Mobile Clip Toy Clip Slot 14 Toy 13 M4 x 31.5 mm Bolt •Fit the string (below the knot) of a toy Rounded Side through the slot in a clip on the mobile. •Pull down on the toy to be sure it is secure on the mobile. • Insert a M4 x 31.5 mm bolt M4 Lock Nut •Repeat this procedure to assemble the other three toys to through smaller hole in the Shown Actual Size the mobile. motorized frame tube and into the seat tube. Note: Toys may be different than those shown. •Attach an M4 lock nut to the
Streszczenie treści zawartej na stronie nr. 8
Battery Installation Battery Tips •Do not mix old and new batteries. •Do not mix different types of batteries: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium). •Remove the batteries during long periods of non-use. Always remove exhausted batteries from this product. Battery leakage and corrosion can damage this product. 1.5V x 4 + - Dispose of batteries safely. “D” (LR20) •Do not dispose of batteries in a fire. The batteries may explode or leak. •Never short-circuit the batter
Streszczenie treści zawartej na stronie nr. 9
Swing and Mobile Use IMPORTANT! Before each use or assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed. Never substitute parts. To Unfold Restraint Belts Button Button Leg Waist Belt Leg Waist Belt Crotch Belt 1 2 •Firmly pull the legs outward. Make sure the buttons snap into the notches in the motorized frame. •Place your child in th
Streszczenie treści zawartej na stronie nr. 10
Swing and Mobile Use Adjust Swing Motion Using the Tray PRESS Seat Tube Button Seat Tube Tray Tab TURN Slot 6 •Fit the tabs on the tray into the slots in the sides of the seat. •To remove the tray, pull the tab out on one side of tray and lift. Storage 4 Cradle Swing Button You can adjust the motion of the swing: side to side or front to back. Button •Press the seat tube button to unlock the seat tube. •Rotate the seat tube to the desired position. Adjust Seat to Recline or Upright Lower Leg But
Streszczenie treści zawartej na stronie nr. 11
Swing and Mobile Use Speed Dial Reset Button Mode Switch Control Panel •Slide the mode switch to: Hints: Swing and Mobile • As with most battery-powered swings, a heavier child reduces Swing Only the amount of swinging motion on all settings. In most cases, the low setting works best for a smaller child while the high Mobile Only setting works best for a larger child. Swing and Mobile Off • If the low setting provides too much swinging motion for •Turn the speed dial to select any of six speed
Streszczenie treści zawartej na stronie nr. 12
Problems and Solutions Problem Probable Cause Solution Motor is not running; Mode switch is in OFF position Slide the mode switch to swing and mobile or swing only. no swinging or mobile only position Batteries incorrectly installed Remove the batteries and replace in correct orientation, as indicated inside the battery compartment. Dead batteries Replace all four batteries with four, fresh “D” alkaline batteries. Motor is running but Need to start swinging motion To start swinging motion, giv
