Streszczenie treści zawartej na stronie nr. 1
Owner’s Manual
ST-NBB
Questions?
Call Us Toll Free
Keys Fitness Helpline
1-888-340-0482
Model Name : ST-NBB
Manufactured Date :
PO # :
Model Name Decal Location
215-00092
09/06 Rev A
Streszczenie treści zawartej na stronie nr. 2
Table of Contents Important Safety Information 3 Assembly 4-9 Parts List 10 Exploded View 11 Warranty Information 12 2
Streszczenie treści zawartej na stronie nr. 3
Important Safety Information Please read all instructions carefully before using this product. SAFETY TIPS Consult with your physician before engaging in any vigorous exercise. Know your heart rate and/or pulse as well as your physician-recommended heart rate training zone. Proper medical clearance is recommended for anyone beginning an exercise program especially if you are 35 years of age or older or suffer from heart respiratory problems. - Warm-up before any exercise program with 8 minu
Streszczenie treści zawartej na stronie nr. 4
Assembly Assembly Hardware 4
Streszczenie treści zawartej na stronie nr. 5
Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 1 Connect the Uprights (#2) & (#12) to the Cross Bar (#01) using four Hex bolts M10X75 (#33) and eight D10 washers (#35), two Reinforcement (#17) and four M10 aircraft Nut (#36). Insert the Crutch (#3) into the Uprights (#2)&(#12) through rect. Outer plug (#16), secure with two Knob Bolts (#15). Attach Safety Hook (#25) to Crutch (#3) using Aircraft Nut (#28). Place Backrest Adj. Bar (#4) Between Uprights
Streszczenie treści zawartej na stronie nr. 6
Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 2 Attach the back of the Main Frame (#5) to the Cross Bar (#1) with two bolts M10X75 (#33), four D10 Washers (#35) and two M10 air- craft nuts (#36). Insert the Front Base (#6) into the bottom of the Front Stand tube (#8), secure with a L-Shaped Lock Pin (#24). Connect the Front Stand Tube (#8) to the Main Frame (#5) using two hex bolts M10X25 (#34), four D10 Washers (#35), and two M10 air- craft nuts (#3
Streszczenie treści zawartej na stronie nr. 7
Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 3 Install the Leg Developer (#7) to bracket of Leg Developer Holder (#11) using one M10X75 Bolt (#32), two D10 Washers (#35), and one M10 aircraft nut (#36), Insert the Roller Foam Tube (#10) halfway into leg developer (#7). Push Roller Foams (#18) on each side of roller tube (#10) to com- plete leg develops assembly. Insert the Leg Developer Holder (#11) into the opening top of the Front Stand Tube (#8)
Streszczenie treści zawartej na stronie nr. 8
Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 4 Attach the backrest support (#9) to the pivot on the Main Frame (#5) . Align Backrest Pad (#13) to backrest support (#9) and secure with four M6X40 Bolts (#29), and four D6.5 washers (#31). Place the seat pad (#14) on bracket of the Main Frame (#5) and secure with four M6X15 Bolts (#30), and four D6.5 washers (#31). And adjust the height with the backrest Adjustment Bar (#04). 8
Streszczenie treści zawartej na stronie nr. 9
Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 5 Attach the two Butterfly Arms (#40) to the Upright Beams (#2)&(#12) with two M10x120 Hex Bolts (#39), two M10 Regular nuts (#37), two D10 spring washers (#38) and two M10 aircraft nuts (#36). Insert the Handrail Bar (#41) through upper holes on Butterfly Arm (#40), slide Foam Rollers (#18) on Handrail Bars (#41). For easy assembly, spray inside of foam rollers with glass cleaner or hairspray. 9
Streszczenie treści zawartej na stronie nr. 10
Parts List ST-NBB Parts List Rev A Ref # Part # Description Qty 1 223-00790 CROSS BAR, M-NBB (SILVER) 1 2 223-00791 RIGHT UPRIGHT, M-NBB (SILVER) 1 3 223-00522 CRUTCH, M-NBB 2 4 219-00487 BACKREST ADJ BAR, ST-NBB (NEW GAUGE) 1 5 223-00792 MAIN FRAME, M-NBB (SILVER) 1 6 223-00793 FRONST BASE FRAME, M-NBB (SILVER) 1 7 223-00530 LEG DEVELOPER M-SBA 1 8 223-00794 FRONT STAND TUBE, M-NBB (SILVER) 1 9 223-00409 BACKREST SUPPORT, M-NBB 2 10 219-00295 ROLLER FOAM TUBE, M-NBB 3 11 219-00296 LEG DEVELOPER
Streszczenie treści zawartej na stronie nr. 11
Exploded View 11
Streszczenie treści zawartej na stronie nr. 12
Warranty KEYS FITNESS PRODUCTS, L.P. STRENGTH TRAINER WARRANTY Keys Fitness Products L.P. warrants this product for a period of 90 days on parts and lifetime on the frame from the original date of purchase. This warranty covers the product from defects in materials and workmanship for the original purchaser. Using this product for commercial purposes, products damaged by misuse, abuse, or from shipping, moving and storage will void this warranty. Replacement parts are available from Keys
Streszczenie treści zawartej na stronie nr. 13
Keys Fitness Products, L.P. 4009 Distribution Drive, Suite 250 Garland, Texas 75041 Customer Service: 1-888-340-0482
