Streszczenie treści zawartej na stronie nr. 1
OM-201 540K 2007−10
Processes
MIG (GMAW) Welding
Pulsed MIG (GMAW-P)
Flux Cored (FCAW) Welding
Automatic Welding
Description
Automatic Welding Interface And
Arc Welding Power Source
™
Auto Axcess 675
Visit our website at
File: Advanced Manufacturing Systems
www.MillerWelds.com/ams
Streszczenie treści zawartej na stronie nr. 2
From Miller to You Thank you and congratulations on choosing Miller. Now you can get the job done and get it done right. We know you don’t have time to do it any other way. That’s why when Niels Miller first started building arc welders in 1929, he made sure his products offered long-lasting value and superior quality. Like you, his customers couldn’t afford anything less. Miller products had to be more than the best they could be. They had to be the best you could buy. Today, the people that bu
Streszczenie treści zawartej na stronie nr. 3
TABLE OF CONTENTS SECTION 1 − SAFETY PRECAUTIONS - READ BEFORE USING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1-1. Symbol Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1-2. Arc Welding Hazards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1-3. Additional Symbols For Installation,
Streszczenie treści zawartej na stronie nr. 4
TABLE OF CONTENTS SECTION 7 − TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 7-1. Set Value Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 7-2. Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 7-3
Streszczenie treści zawartej na stronie nr. 5
SECTION 1 − SAFETY PRECAUTIONS - READ BEFORE USING som _2007−04 7 Protect yourself and others from injury — read and follow these precautions. 1-1. Symbol Usage DANGER! − Indicates a hazardous situation which, if Indicates special instructions. not avoided, will result in death or serious injury. The possible hazards are shown in the adjoining symbols or explained in the text. Indicates a hazardous situation which, if not avoided, could result in death or serious injury. The possible This grou
Streszczenie treści zawartej na stronie nr. 6
Do not use welder to thaw frozen pipes. FUMES AND GASES can be hazardous. Remove stick electrode from holder or cut off welding wire at contact tip when not in use. Welding produces fumes and gases. Breathing Wear oil-free protective garments such as leather gloves, heavy these fumes and gases can be hazardous to your shirt, cuffless trousers, high shoes, and a cap. health. Remove any combustibles, such as a butane lighter or matches, Keep your head out of the fumes. Do not breathe the
Streszczenie treści zawartej na stronie nr. 7
1-3. Additional Symbols For Installation, Operation, And Maintenance FIRE OR EXPLOSION hazard. MOVING PARTS can cause injury. Do not install or place unit on, over, or near Keep away from moving parts such as fans. combustible surfaces. Keep all doors, panels, covers, and guards Do not install unit near flammables. closed and securely in place. Do not overload building wiring − be sure power supply system is Have only qualified persons remove doors, panels, covers, or properly sized,
Streszczenie treści zawartej na stronie nr. 8
1-4. California Proposition 65 Warnings For Gasoline Engines: Welding or cutting equipment produces fumes or gases which contain chemicals known to the State of California to Engine exhaust contains chemicals known to the State of cause birth defects and, in some cases, cancer. (California California to cause cancer, birth defects, or other reproduc- Health & Safety Code Section 25249.5 et seq.) tive harm. For Diesel Engines: Battery posts, terminals and related accessories contain lead and lead
Streszczenie treści zawartej na stronie nr. 9
SECTION 2 − CONSIGNES DE SÉCURITÉ − LIRE AVANT UTILISATION fre_som_2007−04 7 Se protéger et protéger les autres contre le risque de blessure — lire et respecter ces consignes. 2-1. Symboles utilisés DANGER! − Indique une situation dangereuse qui si on Indique des instructions spécifiques. l’évite pas peut donner la mort ou des blessures graves. Les dangers possibles sont montrés par les symboles joints ou sont expliqués dans le texte. Indique une situation dangereuse qui si on l’évite pas peut
Streszczenie treści zawartej na stronie nr. 10
Il reste une TENSION DC NON NÉGLIGEABLE dans LE SOUDAGE peut provoquer un in- les sources de soudage onduleur quand on a cendie ou une explosion. coupé l’alimentation. Le soudage effectué sur des conteneurs fermés tels Arrêter les convertisseurs, débrancher le courant électrique et que des réservoirs, tambours ou des conduites peu décharger les condensateurs d’alimentation selon les instructions provoquer leur éclatement. Des étincelles peuven indiquées dans la partie Entretien avant de touche
Streszczenie treści zawartej na stronie nr. 11
Protéger les bouteilles de gaz comprimé d’une chaleur excessive, LES ACCUMULATIONS DE GAZ des chocs mécaniques, des dommages physiques, du laitier, des risquent de provoquer des blessures flammes ouvertes, des étincelles et des arcs. ou même la mort. Placer les bouteilles debout en les fixant dans un support station- Fermer l’alimentation du gaz protecteur en cas naire ou dans un porte-bouteilles pour les empêcher de tomber ou de non-utilisation. de se renverser. Veiller toujours à bien
Streszczenie treści zawartej na stronie nr. 12
LES FILS DE SOUDAGE peuvent LE RAYONNEMENT HAUTE FRÉ- provoquer des blessures. QUENCE (H.F.) risque de provoquer des interférences. Ne pas appuyer sur la gâchette avant d’en avoir reçu l’instruction. Le rayonnement haute fréquence (H.F.) peut Ne pas diriger le pistolet vers soi, d’autres per- provoquer des interférences avec les équipe- sonnes ou toute pièce mécanique en enga- ments de radio−navigation et de communica- geant le fil de soudage. tion, les services de sécurité et les ordinate
Streszczenie treści zawartej na stronie nr. 13
2-5. Principales normes de sécurité Safety in Welding, Cutting, and Allied Processes, ANSI Standard Z49.1, L4W 5NS (téléphone : 800-463-6727 ou à Toronto 416-747-4044, site de Global Engineering Documents (téléphone : 1-877-413-5184, site Internet : www.csa-international.org). Internet : www.global.ihs.com). Safe Practice For Occupational And Educational Eye And Face Protec- tion, ANSI Standard Z87.1, de American National Standards Institute, Recommended Safe Practices for the Preparation for We
Streszczenie treści zawartej na stronie nr. 14
OM-201 540 Page 10
Streszczenie treści zawartej na stronie nr. 15
SECTION 3 − INSTALLATION Appearance of actual unit may vary from unit shown in manual. 3-1. Specifications Max Amperes Input At Rated Load Output 60 Hz, Rated Wire Feed Wire Open Input Voltage Input Input Three-Phase W Welding elding Speed Speed Diameter Diameter Circuit Circuit Power Power Range Range KV KVA A KW KW Output Output Range** Range** Range Range V Voltage oltage 230 V 400V 460 V 575 V DC Three 675 A @ 10-44 Standard: .035-.062 in 85 89.7 52.0 43.7 21.2 35.7 34.4 Phase 44 V DC, 50-
Streszczenie treści zawartej na stronie nr. 16
3-3. Duty Cycle And Overheating Duty Cycle is percentage of 10 min- utes that unit can weld at rated load without overheating. If unit overheats, thermostat(s) opens, output stops, and cooling fan runs. Wait fifteen minutes for unit to cool. Reduce amperage or duty cycle before welding. NOTICE − Exceeding duty cycle can damage unit and void warranty. 100% Duty Cycle At 675 Amperes Continuous Welding Overheating 0 A/V 15 OR Reduce Duty Cycle Minutes duty1 4/95 − 206 789-A 3-4. Volt-Ampere Curves
Streszczenie treści zawartej na stronie nr. 17
3-5. Selecting A Location ! Do not move or operate Movement unit where it could tip. Tipping 2 OR 1 Location ! Special installation may be required where gasoline or volatile ! Do not stack units. Beware of liquids are present − see NEC Article 511 or CEC Section 20. tipping. 1 Lifting Forks Use lifting forks to move unit. 4 Extend forks beyond opposite side of unit. 3 2 Hand Cart Use cart or similar device to move 18 in unit. (460 mm) 3 Rating Label Use rating label to determine input power nee
Streszczenie treści zawartej na stronie nr. 18
3-7. Rear Panel Receptacles And Supplementary Protectors 1 115 V 10 A AC Receptacle RC2 1 Receptacle supplies 60 Hz 5 4 6 single-phase power. Maximum output from RC2 is limited by supplementary protector CB1 to 10 amps. 2 Supplementary Protector CB1 3 Supplementary Protector CB2 2 CB1 protects 115 volt receptacle RC2 from overload. If CB1 opens, RC2 does not work. 3 CB2 protects the wirefeed motor from overload. If CB2 opens, the wirefeeder does not work. Press button to reset breaker. If brea
Streszczenie treści zawartej na stronie nr. 19
3-8. Connecting To Weld Terminals If using an electrode negative (straight polarity) process, the volt sense lead must be connected to the work. 1 2 6 3 Do not place anything between weld cable terminal and copper bar. 4 5 Tools Needed: 3/4 in (19mm) Correct Installation Incorrect Installation Ref. 802 913-B / 803 778-A cable size. 6 Copper Bar ! Turn off power before connecting to weld output terminals. 1 Positive (+) Weld Output Terminal Remove supplied nut from weld output ! Failure to pr
Streszczenie treści zawartej na stronie nr. 20
3-9. Selecting Weld Cable Sizes* ! ARC WELDING can cause Electromagnetic Interference. To reduce possible interference, keep weld cables as short as possible, close together, and down low, such as on the floor. Locate welding operation 100 meters from any sensitive electronic equipment. Be sure this welding machine is installed and grounded according to this manual. If interference still occurs, the user must take extra measures such as moving the welding machine, using shielded cables, using li
