Instrukcja obsługi Ryobi Reciprocating Saw

Streszczenie treści zawartej na stronie nr. 1

Project Team 1
Christopher Clark
Danielle Launay
Jonathan Lin
John Sequeira
Rishi Wadhera










Ryobi Reciprocating Saw







October 11, 2005
Computer Aided Drafting
14:650:388:01

Streszczenie treści zawartej na stronie nr. 2

Objective: In this project, our main objective is to effectively model the Ryobi ® Variable Speed Reciprocating Saw. It runs through normal 120-V alternating current power. When on, the saw blade has a stroke of 19/16 inches moving at a maximum speed of 2800 strokes per minute. The entire assembly, including the removable blade, weights 6.3 pounds. The saw has 6 speed settings, a trigger which determines whether the saw is on or off, and interchangeable blades. After completing the model

Streszczenie treści zawartej na stronie nr. 3

Streszczenie treści zawartej na stronie nr. 4

Part Number Name 1 Cover Plate 2 Gear Case Seal 3 Gear Case Cover 4 Spring Washer 5 Screw (M4 x 18mm) 6 Seal 7 Screw (M4 x 10mm) 8 Cover Plate 9 Guide Block 10 Saw Bar Assembly 11 Yoke Plate 12 Retaining Ring 13 Roller Bearing 14 Gear Assembly 15 Screw (M4 x 16mm) 16 Shaft Mounting Plate 17 Ball Bearing 18 Gear Shaft 19 Ball Bearing 20 Blade Release Lever 21 Spring 22 Pin 23 Gear Case 24 Lock Washer 25 Screw 26 Screw 27 Rubber Boot 28 Guard Plate 29 Shoe Assembly 3

Streszczenie treści zawartej na stronie nr. 5

45 Switch 46 Lead Assembly 47 Screw 48 Data Plate 49 Trigger 50 Brush Tube Assembly 51 Carrying Case Expected Results: After modeling all the parts in ProE, we expect to be able to assemble the pieces together and animate them to show how the saw operates. Hopefully, we will animate the creation process, the normal function of the saw, and the removal/addition of a blade. After that, we hope to be able to use an ANSYS analysis to see the forces acting on different portions of th