Instrukcja obsługi Black & Decker FIRESTORM CRS180B

Streszczenie treści zawartej na stronie nr. 1

clips, coins, keys, nails, screws or other small metal objects that can make a
connection from one terminal to another. Shorting the battery terminals together may
cause sparks, burns, or a fire.
• Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained tools,
with sharp cutting edge are less likely to bind and are easier to control.
• Check for misalignment or binding of moving parts, breakage of parts, and any other
condition that may affect the tool’s operation. If d

Streszczenie treści zawartej na stronie nr. 2

• To maximize flush cutting capabilities, insert the blade shaft into the blade clamp with the CHARGING THE POWER PACK teeth of the blade facing up. THE BATTERIES IN YOUR POWER PACK ARE NOT FULLY CHARGED AT THE FACTORY. BEFORE ATTEMPTING TO CHARGE THEM, THOROUGHLY READ ALL OF • Turn the saw upside down so you are as close to the work surface as possible. THE SAFETY INSTRUCTIONS. WOOD CUTTING (FIGURE 7) The charger is designed to use standard household 120 volt 60 Hz power. • Before cutting any t