Instrukcja obsługi Antec SOLUTION SERIES SMARTPOWER SLK3700AMB

Streszczenie treści zawartej na stronie nr. 1

User’s Manual
SLK3700AMB
Super Mid Tower Case

Streszczenie treści zawartej na stronie nr. 2

2. Make sure you have the appropriate I/O panel for your motherboard. If the panel Disclaimer provided is not suitable for your motherboard, please contact your motherboard This manual is intended only as a guide for Antec's Computer Enclosures. For more manufacturer for the correct I/O panel. comprehensive instructions on installing your motherboard and peripherals, please refer 3. Line up motherboard with the standoff holes, and determine which ones line up and to the user's manuals whi

Streszczenie treści zawartej na stronie nr. 3

2. Consult your motherboard manual to get each of the pin-out positions. the toolbox in case you later need to cover drive bays again. 3. Power Pins: There are two power pins, one on each row. They are usually marked as 3. Take two drive rails and mount them to the sides of your Power, Vcc or +5V. Connect the two +5V connectors to the two power pins. Each 5.25" device. connector can go to either pin. 4. Slide the device into the drive bay until you hear a click. 4. Ground Pins: There are t