Streszczenie treści zawartej na stronie nr. 1
4-Port PoweredUSB 2.0 Hub
Operations Guide
with External Power Supply
Part #010807
CyberData Corporation
2555 Garden Road
Monterey, CA 93940
(831) 373-2601
930103E
Streszczenie treści zawartej na stronie nr. 2
4-Port PoweredUSB 2.0 Hub Operations Guide 930103E Part # 010807 COPYRIGHT NOTICE: © 2009, CyberData Corporation, ALL RIGHTS RESERVED. This manual and related materials are the copyrighted property of CyberData Corporation. No part of this manual or related materials may be reproduced or transmitted, in any form or by any means (except for internal use by licensed customers), without prior express written permission of CyberData Corporation. This manual, and the products, software, firmwa
Streszczenie treści zawartej na stronie nr. 3
i Contents Chapter 1 Product Overview 1 1.1 Product features .....................................................................................................................................1 1.2 License note .............................................................................................................................................2 1.3 Documentation note .........................................................................................................................
Streszczenie treści zawartej na stronie nr. 4
1 1 Product Overview The SiP VoIP and PoE Speaker provides a simple, affordable way to add up to four PoweredUSB ports to your PC. These additional ports are controlled by the PC’s Standby and Wake commands. This add-on Hub makes it easy to connect the PC to devices that require more than the 500mA of +5 volts supplied with the standard USB interface. Figure 1-1. CyberData 4-Port PoweredUSB 2.0 Hub 1.1 Product features ● 4 PoweredUSB ports ● One +24 volt up to 2.3A ● Three +12 volt up to 1.5
Streszczenie treści zawartej na stronie nr. 5
Product Overview 2 License note 1.2 License note The PoweredUSB controller board contains certain technology that is covered by an IBM patent. ® CyberData Corporation is licensed with IBM to manufacture, and to sell or lease products that incorporate this technology. This license also permits other entities to resell or release these Cyberdata products after they have been purchased from CyberData. 1.3 Documentation note The documentation for this product is released in an English language v
Streszczenie treści zawartej na stronie nr. 6
Product Overview 3 Dimensions 1.4 Dimensions Figure 1-2. Dimensions Perspective View A 1.78 [45.3] 3.71 [94.3] A 4.34 [110.3] View A-A Rear View Dimensions are in Inches [Millimeter] Operations Guide 930103E CyberData Corporation
Streszczenie treści zawartej na stronie nr. 7
4 2 Installing and Using the 4-Port PoweredUSB Hub This chapter provides the instructions, illustrations, and background information you need to install, and begin working with the SiP VoIP and PoE Speaker. ● Section 2.1, "Product Components List" ● Section 2.2, "Product Compatibility" ● Section 2.3, "Installation" ● Section 2.4, "Connections" ● Section 2.5, "Operation" ● Section 2.6, "Port Electrical Specifications" Figure 2-3. CyberData 4-Port PoweredUSB 2.0 Hub Operations Guide 930103E Cyb
Streszczenie treści zawartej na stronie nr. 8
Installing and Using the 4-Port PoweredUSB Hub 5 Product Components List 2.1 Product Components List The 4-Port PoweredUSB 2.0 Hub package includes these parts: ● (1) SiP VoIP and PoE Speaker ● Power Supply, 24VDC, Desk-top, 4-Pin Hosiden style plug ● (1) Accessory Kit � (1) Short USB 2.0 Hi-Speed host cable � (1) Host USB cable strain relief clamp �(1) 4-Port PoweredUSB 2.0 Hub Operations Guide Figure 2-4. CyberData 4-Port PoweredUSB 2.0 Hub—Front View Port Power LED +12V PoweredUSB Ports Hub
Streszczenie treści zawartej na stronie nr. 9
Installing and Using the 4-Port PoweredUSB Hub 6 Product Compatibility 2.2 Product Compatibility The SiP VoIP and PoE Speaker is compatible with the following operating systems and USB standards. Table 2-1. Operating Systems Operating systems USB Windows 2000 and XP 2.0 Standard LINUX PoweredUSB 0.8g Mac OS-X 2.3 Installation The SiP VoIP and PoE Speaker is a tabletop unit with mounting feet that sit on a flat surface. Operations Guide 930103E CyberData Corporation
Streszczenie treści zawartej na stronie nr. 10
Installing and Using the 4-Port PoweredUSB Hub 7 Connections 2.4 Connections This following topics provide illustrations and information on connecting the SiP VoIP and PoE Speaker to power supplies, the host, and peripheral devices. ● Section 2.4.1, "Power Supply" ● Section 2.4.2, "Host Connector" ● Section 2.4.3, "PoweredUSB Connections" ● Section 2.4.4, "Connector Color Keys" ● Section 2.4.5, "Peripherals Connections to the SiP VoIP and PoE Speaker" ● Section 2.4.6, "Peripheral Cable Connec
Streszczenie treści zawartej na stronie nr. 11
Installing and Using the 4-Port PoweredUSB Hub 8 Connections 2.4.2 Host Connector The connection to the host computer is achieved via a standard USB 2.0 certified Hi-Speed “A” to “B” cable that is included in the Accessory Kit, or with any equivalent USB 2.0 certified Hi-Speed cable. Refer to the Section 2.1, "Product Components List" for information about the Accessory Kit. Figure 2-7. Host connector with strain relief 2.4.3 PoweredUSB Connections The PoweredUSB connections are standard USB
Streszczenie treści zawartej na stronie nr. 12
Installing and Using the 4-Port PoweredUSB Hub 9 Connections 2.4.4 Connector Color Keys The PoweredUSB connectors are color keyed so that only the correct voltage cables can be installed. Figure 2-8. Color-Coding for Connectors Teal Red 12 Volt Keyed 24 Volt Keyed 1.5A each 2.3A Ports 1,2, and 3 Ports 4 Figure 2-9. USB PoweredUSB Socket Connector Pin Assignments PIN OUT Pin Signal Description 1 Vbus USB standard “A” 2 D- USB standard “A” 3 D+ USB standard “A” 4 Ground USB standard “A” 5 Grou
Streszczenie treści zawartej na stronie nr. 13
Installing and Using the 4-Port PoweredUSB Hub 10 Connections 2.4.5 Peripherals Connections to the SiP VoIP and PoE Speaker This figure illustrates the cable routing from the SiP VoIP and PoE Speaker to the Dell Retail Integrator. Figure 2-10. Top view of Hub PoweredUSB cable routing +24V PoweredUSB Connector +12V PoweredUSB Connectors CyberData 4-Port PoweredUSB Hub Operations Guide 930103E CyberData Corporation
Streszczenie treści zawartej na stronie nr. 14
Installing and Using the 4-Port PoweredUSB Hub 11 Connections 2.4.6 Peripheral Cable Connection Options Figures 10 through 16 provide examples of peripheral cable combinations and connection options for the SiP VoIP and PoE Speaker. The following table provides details about the CyberData PoweredUSB Cables displayed in these figures. PoweredUSB cable Custom cables of different lengths and colors can be purchased from CyberData as follows: sources ● Via email: sales@cyberdata.net ● Via phone:
Streszczenie treści zawartej na stronie nr. 15
Installing and Using the 4-Port PoweredUSB Hub 12 Connections Figure 2-12. Cables; +12V PoweredUSB to +12V Power Jack and RS-232 to RS-232 Figure 2-13. Cables; +24V PoweredUSB to 3-Pin Mini-DIN and RS-232 to RS-232 or Parallel to Parallel Operations Guide 930103E CyberData Corporation
Streszczenie treści zawartej na stronie nr. 16
Installing and Using the 4-Port PoweredUSB Hub 13 Connections Figure 2-14. “Y” Cable, +24V PoweredUSB to 3-Pin Power Mini-DIN and USB “B” Connectors Figure 2-15. RS232 to USB Converter “Y” Cable +12V (PC Enumerates this device as an RS-232 COM port) Figure 2-16. Cable, +24V PoweredUSB to 1x8 PoweredUSB Operations Guide 930103E CyberData Corporation
Streszczenie treści zawartej na stronie nr. 17
Installing and Using the 4-Port PoweredUSB Hub 14 Operation Figure 2-17. RS232 to USB Converter “Y” Cable +24V 2.5 Operation The SiP VoIP and PoE Speaker is a standard USB Hub that complies with the USB 2.0 specification, and adds PoweredUSB ports. When connected to a Host, it is enumerated as a Generic USB Hub. This Hub also meets the PoweredUSB .08g specification. For more information about this specification, go to www.poweredusb.org. 2.5.1 POS Peripheral Caveat According to the USB 2.0
Streszczenie treści zawartej na stronie nr. 18
Installing and Using the 4-Port PoweredUSB Hub 15 Port Electrical Specifications 2.6 Port Electrical Specifications The SiP VoIP and PoE Speaker adheres to the USB 2.0 electrical specifications as follows: 2.6.1 Standard USB lower A supply Each lower portion of the PoweredUSB port provides +5V @ 500mA. If more than 500mA are drawn from a port, that port goes into USB over current, the +5 volts is turned off, and the condition is reported to the host according to USB 2.0 specifications. 2.6.2
Streszczenie treści zawartej na stronie nr. 19
16 Appendix A: Regulatory and Safety Information Regulatory FCC Statement: This equipment has been tested and found to comply with the limits for a Class A standards digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the in
Streszczenie treści zawartej na stronie nr. 20
17 Appendix B: Setting up the Hub on Windows XP For connecting the SiP VoIP and PoE Speaker to a PC running the Windows XP operating system, keep in mind: 1. Microsoft XP Service Pack 1 or higher must be installed. 2. When connecting the Hub for the first time, it is important to perform the enumeration correctly. A Microsoft XP Service Pack issue does not enumerate and recognize a Hub when no devices are attached to it. To correctly enumerate the SiP VoIP and PoE Speaker, attach a peripher
