Instrukcja obsługi Addonics Technologies ADS3GX4R5-MLM

Streszczenie treści zawartej na stronie nr. 1

ADDONICS TECHNOLOGIES
ADS3GX4R5-MLM (Multilane 4X PCI-X Controller For Mac)



Addonics ADS3GX4R5-MLM Macintosh Instructions
The ADS3GX4R5-MLM has been tested on a PowerMac G5 Dual 2.0
GHz model with PCI-X slots and on a PowerMac G4 with PCI slots.
Mac OS X 10.4.x or later is required for the driver to work properly.

Hardware Install:
1. Turn the PowerMac G4 or G5 off and disconnect all cables.
2. Make sure that you are grounded to avoid static electricity.
3. Open the PowerMa

Streszczenie treści zawartej na stronie nr. 2

4. Press continue and accept the license. 5. Select your startup drive as the install destination volume. 6. Push continue and the install button. 7. Type in your password to complete the installation. Usage: The SiI3124_2.0.3_Sil_Pkg Macintosh driver supplied with the Addonics ADS3GX4R5-MLM SATA host adapter is designed to provide multilane compatibility for an Apple PowerMac G4 or G5 running Mac OS X 10.4.x. There are several multilane enclosures that will work with the ADS3GX4

Streszczenie treści zawartej na stronie nr. 3

Setup When you first purchase and install a new hard that is attached to the ADS3GX4R5-MLM host adapter, you will need to format the hard drive using the erase tab in Disk Utility. Disk Utility can be found in the Mac OS X “Utility” folder. Once you have erased the new hard drive it will mount on the desktop and be ready for use. You can also create RAIDs using Disk Utility with the hard drives mounted in your SATA enclosure. Addonics Technologies 2466 Kruse Drive San Jose, CA 95