Instrukcja obsługi Addonics Technologies RT5835HMEU

Streszczenie treści zawartej na stronie nr. 1

ADDONICS TECHNOLOGIES
Model: RT5835HMEU

I. Installing drive into the RAID Tower V

Step 1
Set A (4-drive HPM)
Use a Philips screwdriver to secure the 3.5”
SATA hard drive to the drive tray

Step 2
Slide the tray into the Disk Array drive bay.


Note: It is recommended to fill up the RAID
Tower V with SATA drives from right to left
and top to bottom. This is to help in identifying
Set B
which drives connect to which ports for easier
(4-drive HPM)
troubleshooting.

I

Streszczenie treści zawartej na stronie nr. 2

ADDONICS TECHNOLOGIES Model: RT5835HMEU Instruction for Special RAID Modes: BIG 2 - 2 Drives Spanned o Note: Do not connect more than 2 SATA drives to the hardware port multiplier. Doing so will hang the system when you configure the raid. o For SATA drives with different capacities, the hardware port multiplier will use the smallest drive capacity of the 2 drives connected to create the total partition size. FAST 2 - 2 Drives Striped o Note: Do not connect more th