Instrukcja obsługi Texas Instruments TMDXEVM6472

Streszczenie treści zawartej na stronie nr. 1

Getting Started:
TI Worldwide Technical Support
The EVMC6472 ships with a Power On self Test (POST) flashed
Internet
in to I2C EEPROM. The POST will be automatically executed
TI Semiconductor Product Information Center Home Page
when the board is powered ON. POST will perform memory
support.ti.com
TMDXEVM6472
test and EMAC internal loopback test. At 'power on' state the
TI Semiconductor KnowledgeBase Home page
user LEDs will glow. The LEDs will continue to glow while the
support.ti.com/s

Streszczenie treści zawartej na stronie nr. 2

1a The EVMC6472 is also shipped with an Out-Of-Box Demo application C6472 Evaluation Module flashed into NAND. This is a network 4 based application which starts an HTTP 2 server and a TELNET server with the following static IP address: 192.168.2.100. The application enables the following: User switch 1 OFF - Static IP set as 1 192.168.2.100 (recommended) User switch 1 ON - Obtains IP address from DHCP server In order to connect to the board, the test PC should be configured with sta