Instrukcja obsługi Addonics Technologies ADMS6GPX2

Streszczenie treści zawartej na stronie nr. 1

Setting Up Hardware RAID
This adapter's hardware RAID capabilities may be configured using either
the BIOS utility or the Marvell Storage Utility. There is no functional
T E C H N O L O G I E S
difference, other than the BIOS utility can prepare an array without an
operating system (which may then be installed onto the array) and the
Marvell Storage Utility has the convenience of a Graphical User Interface.
This adapter supports RAID 0 (2, 3 or 4 drives), RAID 1 (2 drives), RAID
10 (4 drive

Streszczenie treści zawartej na stronie nr. 2

Hardware Installation Unpacking and Overview NOTE: This controller is not compatible with SAS targets. ADMS6GPX2 1. Power off the computer and install the card in a PCI Express slot that LED Connectors can accept a 2X or larger card. Mini SAS (SFF-8087) 2. Connect the Mini SAS cable to target devices. NOTE: This host adapter Connector can support up to a total of 7 targets, with the use of one port multiplier. However, it will only recognize up to four drives on a port multiplier