Streszczenie treści zawartej na stronie nr. 1
Install Drivers Install Programs
SyncMaster 710MP
Streszczenie treści zawartej na stronie nr. 2
Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Grounding to prevent an electric shock Power When not used for extended period of time, set your computer to DPMS. If using a screen saver, set it to the active screen mode.
Streszczenie treści zawartej na stronie nr. 3
Do not use a damaged or loose plug. This may cause an electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause an electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. Insert the power plug firmly so that it does not come loose. A bad connection may cause fire. Do not excessively bend the plug and wire nor pla
Streszczenie treści zawartej na stronie nr. 4
Do not drop the monitor when moving it. This may cause damage to the product or human body. Install the monitor base in a showcase or shelf so that the end of the base does not project beyond the showcase or shelf. Dropping the product may cause damage to the product or personal injury. Do not place the product on an unstable or small surface area. Place the product on an even, stable surface, as the product may fall and cause harm to someone walking by, specifically childre
Streszczenie treści zawartej na stronie nr. 5
Installation by unqualified personnel may result in injury. Always use the mounting device specified in the owner's manual. When installing the product, make sure to keep it away from the wall (more than 10cm/4inch ) for ventilation purposes. Poor ventilation may cause an increase in the internal temperature of the product, resulting in a shortened component life and degraded performance. To prevent rainwater from running along the outdoor antenna cable and entering the hou
Streszczenie treści zawartej na stronie nr. 6
Make sure to unplug the power cord before cleaning the product. Otherwise, this may cause electric shock or fire. Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent. Contact the Service Center or Customer Center for interior cleaning once a year. Keep the product's interior clean. Dust which has accumulated in the interio
Streszczenie treści zawartej na stronie nr. 7
Do not try to move the monitor by pulling only the wire or the signal cable. This may cause a breakdown, electric shock or fire due to damage to the cable. Do not move the monitor right or left by pulling only the wire or the signal cable. This may cause a breakdown, electric shock or fire due to damage to the cable. Do not cover the vents on the monitor cabinet. Bad ventilation may cause a breakdown or fire. Do not place water containers, chemical products or small
Streszczenie treści zawartej na stronie nr. 8
Adjust the resolution and frequency to the levels appropriate for the model. Inappropriate resolution may cause undesirable picture quality. 17 inch - 1280 X 1024 Keep the volume at a proper level when you use the headphones. Excessively loud volume levels may damage hearing. Watching the monitor continuously at a too close angle may result in eyesight damage. To ease eye strain, take at least a five-minute break after every hour of using . the monitor Do not install
Streszczenie treści zawartej na stronie nr. 9
If swallowed, see a doctor immediately. When replacing batteries, place the batteries in the correct +/- polarity position as indicated on battery holder. Incorrect polarity may cause a battery to break or leak and could lead to fire, injury, or contamination (damage). Use only specified standard batteries. Do not use new and used batteries together. This may cause a battery to break or leak and could lead to fire, injury, or contamination (damage). The battery (and rec
Streszczenie treści zawartej na stronie nr. 10
Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking Monitor Manual Warranty Card User's Guide, Monitor Driver, Quick Setup Guide (Not available in all locations) Natural Color software
Streszczenie treści zawartej na stronie nr. 11
Cable D-Sub Cable Power Cord Audio Cable Others Remote Control Remote Control This remote control is used This remote control is used Batteries (AAA X 2) in all countries except for in China only. China. Front 1. SOURCE 2. MagicBright™ 3. AUTO / EXIT 4. CH 5. VOL 6. MENU 7. Power button 8. Power indicator 9. Remote Control Sensor 10. Speaker
Streszczenie treści zawartej na stronie nr. 12
1. SOURCE Switches from PC mode to Video mode. Changing the source is allowed only in external devices that are connected to the monitor at the time. To switch Screen modes: [PC] [TV] [AV] [S-Video] >>Click here to see an animation clip For more information > Broadcasting Systems 2. MagicBright™ MagicBright™ is a new feature providing the optimum viewing environment depending on the contents of the image you are watching. Then push button again to circle through availabl
Streszczenie treści zawartej na stronie nr. 13
(The configuration at the back of the monitor may vary from product to product.) 1. POWER-IN This product may be used with 100 ~ 240VAC(+/- 10%). 2. PC Computer Connection Terminal (15 Pin D-SUB) 3. TV TV Connection Terminal For more information > Connecting TV 4. AUDIO(ST)
Streszczenie treści zawartej na stronie nr. 14
Audio Connection Terminal 5. Video Connection Terminal 1. Headphone Connection Terminal (Output) 2. Left(L) / Right(R) Audio Connection Terminal (Input) 3. Video Connection Terminal (Input) 4. S-Video Connection Terminal (Input) See Connecting the Monitor for further information regarding cable connections. Remote Control The performance of the remote control may be affected by a TV or other electronic devices operated near the monitor, causing malfucti
Streszczenie treści zawartej na stronie nr. 15
1. POWER Use this button to turn the monitor on and off. 2. number Selects TV channels in the TV mode. You may use this button in PIP mode as well. 3. -/-- (One/Two-Digit CHANNEL selection ) Use to select a CHANNEL numbered ten or over. Press this button, and the "--" symbol is displayed. Enter the two-digit CHANNEL number. 4. (Volume) Adjusts the audio volume. 5. MUTE Pauses (mutes) the audio output temporarily. Displays on the lower left corner of the screen. The
Streszczenie treści zawartej na stronie nr. 16
Connecting the Monitor 1. Connecting to a Computer Connect the power cord for your monitor to the power port on the back of the monitor. 1. Plug the power cord for the monitor into a nearby outlet. 2. Using the D-sub (Analog) connector on the video card. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor. 3. Connect the audio cable for your monitor to the audio port on the back of your computer. 4. Turn on both your computer and the monitor
Streszczenie treści zawartej na stronie nr. 17
1. Using the D-sub (Analog) connector on the video card. Connect the signal cable to the D-SUB port on the Macintosh computer. 2. For old model Macintoshes, you need to adjust the resolution control DIP switch on the Macintosh adapter (optional) referring to the switch configuration table shown on its rear. 3. Turn on the monitor and Macintosh. Connecting to Other Devices This monitor allows the user to connect it to such input devices as a DVD player, a VCR or a camcorder, o
Streszczenie treści zawartej na stronie nr. 18
2. Connect the Audio (R) and Audio (L) output terminals of a DVD, VCR or Camcorders to the monitor's R and L audio input terminals using audio cables. 3. Then, start the DVD, VCR or Camcorders with a DVD disc or tape inserted. 4. Select AV or S-Video using the SOURCE button. 2. Connecting TV You may view television programs on the monitor if it is connected to an antenna or a CATV cable without installing any separate TV reception hardware or software on your computer. 1. Connect
Streszczenie treści zawartej na stronie nr. 19
Using the Stand This monitor supports various types of VESA-standard bases. You need to either fold or remove the base in use in order to install a VESA base. 1. Folding the Base The monitor may be reclined from 0 to 19 degrees. 2. Attaching the Base This monitor accepts a 75 mm x 75 mm VESA-compliant mounting interface pad. A. Monitor B. Mounting interface pad 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surface w
Streszczenie treści zawartej na stronie nr. 20
Installing the Monitor Driver (Automatic) When prompted by the operating system for the monitor driver, insert the CD-ROM included with this monitor. Driver installation is slightly different from one operating system to another. Follow the directions appropriate for the operating system you have. Prepare a blank disk and download the driver program file at the Internet web site shown here. Internet web site : http://www.samsung.com (Worldwide) http://www.samsung.com/monitor (USA) h
