Streszczenie treści zawartej na stronie nr. 1
SyncMaster XL20
SyncMaster XL20
Streszczenie treści zawartej na stronie nr. 2
SyncMaster XL20 Model Notational Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Ground to prevent an electric shock Power When not used for an extended period of time, set your computer to DPMS. If using a screen saver, set it to active screen mode.
Streszczenie treści zawartej na stronie nr. 3
Do not use a damaged or loose plug. This may cause electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. This may cause electric shock or fire. Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. Insert the power plug firmly so that it does not come loose. A bad connection may cause fire. Do not excessively bend the plug and wire nor place heavy
Streszczenie treści zawartej na stronie nr. 4
Be sure to contact an authorized Service Center, when installing your monitor in a location with heavy dust, high or low temperatures, high humidity, and exposed to chemical substances and where it operates for 24 hours such as at airports, train stations etc. Failure to do so may cause serious damage to your monitor. Place your monitor in a location with low humidity and a minimum of dust. Failure to do so may cause electric shock or fire inside the monitor. Do not drop
Streszczenie treści zawartej na stronie nr. 5
Put down the monitor carefully. Failing to do so may damage the monitor. Do not place the monitor face down. This may damage the TFT-LCD surface. The installation of the bracket must be done by a qualified professional. Installing the bracket by unqualified personnel may result in injury. Always use the mounting device specified in the owner's manual. When installing the product, make sure to keep it away from the wall (more than 10 cm/4 inches ) for ventilation
Streszczenie treści zawartej na stronie nr. 6
Use the recommended detergent with a smooth cloth. If the connector between the plug and the pin is dusty or dirty, clean it properly using a dry cloth. A dirty connector may cause electric shock or fire. Make sure to unplug the power cord before cleaning the product. Otherwise, this may cause electric shock or fire. Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinner
Streszczenie treści zawartej na stronie nr. 7
the monitor could be exposed to snow or rain. If the monitor is dropped or the casing is damaged, turn the monitor off and unplug the power cord. Then contact a Service Center . The monitor may malfunction, causing electric shock or fire. Disconnect the plug from the outlet during storms or lightning or if it is not used for a long period of time. Failure to do so may cause electric shock or fire. Do not try to move the monitor by pulling only the wire or the signal cabl
Streszczenie treści zawartej na stronie nr. 8
Do not insert metal objects such as chopsticks, wire and tools or inflammable objects such as paper or matches into the vent, headphone port or AV ports or etc. This may cause electric shock or fire. If an alien substances or water enters the product, turn the product off, unplug the power connector from the wall outlet and contact the Service Center. When viewing a fixed screen for an extended period of time, residual image or blurriness may appear. Change the mode to energy
Streszczenie treści zawartej na stronie nr. 9
Otherwise, this may cause heat emission from the accumulated dirt or degraded insulation, causing electric shock or fire. Do not place your children's favorite toys or any other objects of interest on the product. Children may try to climb on the product to retrieve an object. The product could fall, causing injury or even fatality. When lifting up or moving the monitor, do not lift the monitor upside down while holding only the stand. This may cause your monitor to fall, and
Streszczenie treści zawartej na stronie nr. 10
SyncMaster XL20 Model Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking With Stand Without Stand (Monitor & Sliding Stand) Manual User's Guide, Monitor Driver, Warranty Card Natural Color Expert Quick Setup Guide (Not available in all software, locations) MagicRotation software, ImageViewer software Cable
Streszczenie treści zawartej na stronie nr. 11
USB Cable Power Cord DVI Cable (A-B Type cable) Others Calibrater Cradle Hood Front MODE button Press this button to select a Color Mode. Continuing to press the (= Color Mode) button, will repeatedly display the setting modes. With the control buttons at the front of the monitor, you can easily implement different color information matching your environment.
Streszczenie treści zawartej na stronie nr. 12
1) Custom - Although the values are carefully chosen by our engineers, the pre-configured values may not be comfortable to your eyes depending on your taste. If this is the case, adjust the brightness and contrast by using the OSD menu. 2) sRGB - Displays the sRGB color information on the screen. 3) AdobeRGB - Displays the Adobe RGB color information on the screen. 4) Emulation - With Natural Color Expert, you can change the system profile or a previously created color information an
Streszczenie treści zawartej na stronie nr. 13
DVI Connect the terminal of your monitor to your computer using a DVI DVI cable. 1. DVI-D (digital only): Only digital signals can be input to this terminal. Therefore, only connect the DVI terminal of your PC to this terminal. 2. DVI-I (for both digital and analog) : You can connect any one of the DVI and RGB terminals of your PC to this terminal. Stand Stopper Remove the fixing pin on the stand to lift the monitor up and down. POWER 1. POWER S/W : S
Streszczenie treści zawartej na stronie nr. 14
Kensington Lock The Kensington lock is a device used to physically fix the system when using dit in a public place. (The locking device has to be purchased separately.) For using a locking device, contact where you purchase it. USB connection terminal Connect the port of the monitor UP (USB upstream port): UP and the USB port of the computer with the USB cable. DOWN (USB downstream port): Connect the DOWN port of the USB monitor and a USB device with the USB cable. T
Streszczenie treści zawartej na stronie nr. 15
SyncMaster XL20 Model Connecting the Monitor Connecting the Monitor Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. Use a connection appropriate for your computer. Using the DVI (Digital) connector on the video card. Connect the DVI Cable to the DVI Port on the back of your Monitor. [ DVI-D ] [ DVI-I ] Connected to a Macintosh. Connect the monitor to the Macintosh
Streszczenie treści zawartej na stronie nr. 16
LED indicators Turns on a red light when a product such as a scanner is being used. Illuminance sensor Measures the surrounding illuminance. Sticky plates Helps to attach the calibrater firmly to your monitor. Color sensor Adjusts the brightness of your monitor so that it matches the actual color sense. Scratch prevention Protects the monitor when attached to it. pad 2) Connecting the Calibrater Connect the USB cable of the calibrater to the USB port on the righ
Streszczenie treści zawartej na stronie nr. 17
The cradle allows the calibrater to stand at a similar angle to the monitor. There are grooves in the circumference and at the bottom of the cradle, which you can use to arrange the USB cable neatly. When not used, you can also place the USB port here. Changing the Stand and Installing the Hoods Sliding Stand Stand Stopper Swivel stand
Streszczenie treści zawartej na stronie nr. 18
Using ( ),You can swivel the monitor left and right at an angle of 330 ° to set the monitor lengthwise. The rubber under the stand is to avoid the monitor slide. Tilt angle Using ( ), You can adjust the tilt angle forward and backward for the most comfortable viewing angle. Removing the base
Streszczenie treści zawartej na stronie nr. 19
1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. 3. Remove two screws ( ) and then remove the Stand from the LCD monitor. Attaching a Base This monitor accepts a 100 mm x 100 mm VESA-compliant mounting interface pad. Monitor Mounting interface pad (Sold separately) 1. Turn off your monitor and unplug its power cord. 2. Lay the LCD monitor face-down on a flat s
Streszczenie treści zawartej na stronie nr. 20
Installation Using the Hood 1) What is the Hood? It is a device that can be attached to the top, right and left of the monitor to screen sunlight, preventing any color distortion. You can change the colors of the entire screen according to your preferences. Insert the hooking parts ( ) of both hoods starting from the top and moving downwards into the grooves ( ) near the left and right edges at the back of the monitor. Fit the top part of the monitor into the top of
