Streszczenie treści zawartej na stronie nr. 1
HP ZR30w LCD Monitor
User Guide
Streszczenie treści zawartej na stronie nr. 2
© 2009 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services . Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained h
Streszczenie treści zawartej na stronie nr. 3
About This Guide This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE: Text set off in this manner provides important supp
Streszczenie treści zawartej na stronie nr. 4
iv About This Guide ENWW
Streszczenie treści zawartej na stronie nr. 5
Table of contents 1 Product Features HP ZR30w Model ................................................................................................................................. 1 2 Safety and Maintenance Guidelines Important Safety Information ................................................................................................................ 2 Maintenance Guidelines ...............................................................................................................
Streszczenie treści zawartej na stronie nr. 6
Appendix A Troubleshooting Solving Common Problems ................................................................................................................ 19 Online Technical Support ................................................................................................................... 20 Preparing to Call Technical Support ................................................................................................... 20 Appendix B Technical Specifications ZR30w Model
Streszczenie treści zawartej na stronie nr. 7
1 Product Features HP ZR30w Model The LCD (liquid crystal display) monitor has an active matrix, thin-film transistor (TFT) panel. The monitor features include: 29.7–inch (75.4 cm) viewable area display with 2560 x 1600 resolution ● ● Wide viewing angle to allow viewing from a sitting or standing position, or moving side-to-side ● Tilt, swivel, and height adjustment capabilities ● Removable stand for flexible mounting solutions with HP Quick Release and VESA 100 mm mounting holes ● Video signal
Streszczenie treści zawartej na stronie nr. 8
2 Safety and Maintenance Guidelines Important Safety Information A power cord is included with the monitor. If another cord is used, use only a power source and connection appropriate for this monitor. For information on the correct power cord set to use with the monitor, refer to the Power Cord Set Requirements on page 25 in Appendix C. WARNING! To reduce the risk of electric shock or damage to the equipment: • Do not disable the power cord grounding feature. The grounding plug is an important
Streszczenie treści zawartej na stronie nr. 9
Maintenance Guidelines To enhance the performance and extend the life of the monitor: ● Do not open the monitor cabinet or attempt to service this product yourself. Adjust only those controls that are covered in the operating instructions. If the monitor is not operating properly or has been dropped or damaged, contact an authorized HP dealer, reseller, or service provider. Use only a power source and connection appropriate for this monitor, as indicated on the label/ ● back plate of the monitor
Streszczenie treści zawartej na stronie nr. 10
3 Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow the instructions below. NOTE: Be sure the master power switch, located on the rear panel of the monitor, is in the off position. The master power switch turns off all power to the monitor. Installing the Monitor Pedestal Base NOTE: Do not install the pedestal base if the monitor will be used on a wall, swing arm, or other mounting fixture; i
Streszczenie treści zawartej na stronie nr. 11
Rear Components HP ZR30w Model Figure 3-2 Rear Components Table 3-1 Rear Components Component Function 1 Cable Lock Provision Provides slot for use with cable security locks. 2 Master Power Switch Turns off all power to the monitor. 3 AC Power Connector Connects the AC power cord to the monitor. 4 DisplayPort Connector Connects the DisplayPort cable to the monitor. 5 DVI-D Connector Connects the DVI-D cable to the monitor. 6 USB Upstream Connector Connects the monitor USB hub cable to a host U
Streszczenie treści zawartej na stronie nr. 12
Routing and Connecting the Cables 1. Place the monitor in a convenient, well-ventilated location near the computer. 2. Remove the cable routing cover by pulling it straight off the front of the column. Figure 3-3 Removing the Cable Routing Cover 3. Before connecting the cables, route them through the cable routing hole in the column (1) and replace the cable routing cover (2). Figure 3-4 Routing Cables 4. Connect a DVI-D signal cable or DisplayPort signal cable. 6 Chapter 3 Setting Up the Mo
Streszczenie treści zawartej na stronie nr. 13
NOTE: The video source is determined by the video cable used. The monitor will automatically determine which inputs have valid video signals. The inputs can be selected by pressing the Source button on the front panel . For DVI digital operation, use the DVI-D signal cable provided. Connect the DVI-D signal cable ● to the DVI connector on the rear of the monitor and the other end to the DVI connector on the computer. ● For DisplayPort digital operation, use the DisplayPort signal cable provided.
Streszczenie treści zawartej na stronie nr. 14
Connecting USB Devices The monitor provides USB connectors on the side panel and on the rear panel that can be used to connect devices such as a digital camera, USB keyboard, or USB mouse. NOTE: You must connect the USB hub cable from the monitor to the computer to enable the USB 2.0 ports on the monitor. Refer to Step 5 in Routing and Connecting the Cables on page 6. Figure 3-6 Connecting USB Devices Adjusting the Monitor 1. Tilt the monitor's panel forward or backward to set it to a comfortab
Streszczenie treści zawartej na stronie nr. 15
2. Swivel the monitor to the left or right for the best viewing angle. Figure 3-8 Swiveling the Monitor 3. Adjust the monitor's height so that it is parallel to your eye height for a comfortable viewing position. A lock-down/release button on the back of the column prevents the display head from sliding up when the monitor is lifted. If the display head is locked in the lowest height position: a. Make sure that the monitor is safely positioned on a stable surface. b. Gently push down on the dis
Streszczenie treści zawartej na stronie nr. 16
Turning on the Monitor 1. Ensure that the master power switch on the rear of the monitor is in the On position. 2. Press the power button on the computer to turn it on. 3. Press the power button on the front of the monitor to turn it on. CAUTION: Burn-in image damage may occur on monitors that display the same static image on screen for a prolonged period of time.* To avoid burn-in image damage on the monitor screen, you should always activate a screen saver application or turn off the monitor w
Streszczenie treści zawartej na stronie nr. 17
Removing the Monitor Pedestal Base You can remove the monitor panel from the pedestal base to mount the panel on a wall, a swing arm, or other mounting fixture (purchased separately). This monitor has a Quick Release mechanism that allows you to easily remove and replace the monitor panel to the pedestal base. CAUTION: Before beginning to disassemble the monitor, be sure the monitor is turned off and the power and signal cables are both disconnected. Also disconnect any USB cables that are conne
Streszczenie treści zawartej na stronie nr. 18
Mounting the Monitor NOTE: This apparatus is intended to be supported by UL or CSA Listed wall mount bracket. The HP Quick Release can be removed from the pedestal base and installed to a mounting fixture. It allows you to quickly and securely attach the monitor panel to the mounting fixture. 1. Remove the monitor panel from the pedestal base. Refer to Removing the Monitor Pedestal Base on page 11 in the previous section. CAUTION: This monitor supports the VESA industry standard 100 mm mounting
Streszczenie treści zawartej na stronie nr. 19
3. Mount the Quick Release to a swing arm or other mounting fixture using the four screws removed from the Quick Release in the previous step. Figure 3-12 Installing the Quick Release CAUTION: The Quick Release can also be installed directly to a wall to mount the monitor panel. It is designed to support a maximum of up to 10.9 kg (24 lbs). If you are mounting to a wall, HP recommends that you consult with a qualified engineering, architectural, or construction professional to determine the app
Streszczenie treści zawartej na stronie nr. 20
Locating the Rating Labels The rating labels on the monitor provide the spare part number, product number, and serial number. You may need these numbers when contacting HP about the monitor model. The rating labels are located on the rear panel of the monitor display head. Figure 3-14 Locating the Rating Labels Installing an HP/Kensington MicroSaver Security Cable Lock You can secure the monitor to a fixed object with an optional cable lock available from HP. 14 Chapter 3 Setting Up the Monit
