Streszczenie treści zawartej na stronie nr. 1
Marshall Electronics
V-R151DP-AFSD • V-R151DP-AFHD
SD/HD Video LCD Monitor
Operating Instructions
Streszczenie treści zawartej na stronie nr. 2
Contents Product Overview.....................................................................................................................................................3 Features ....................................................................................................................................................................3 Installation and Initial Setup ......................................................................................................................
Streszczenie treści zawartej na stronie nr. 3
Product Overview The V-R151DP-AFSD/AFHD is a 15” SD/HD video LCD monitor, featuring our completely digital TFT-MegaPixel ™ active matrix LCD system. Occupying only 6 RU and only 1.77” deep, this monitor is an ideal lightweight replacement for CRTs used in all broadcast and professional video applications. Emulation of SMPTE-C/EBU color and adjustable color temperature enable the most precise color representation possible. Our proprietary digital signal processing features 10- bit A/D conversion
Streszczenie treści zawartej na stronie nr. 4
Installation and Initial Setup ■ Unpacking Carefully unpack the V-R151DP-AFSD/AFHD monitor and verify that the following items are included: • V-R151DP-AFSD/AFHD Monitor with Attached Rack Ears • V-PS12-5V-1 Power Supply with Conxall 2-Pin Twist-Lock Connector • Operating Instructions Inspect the unit for any physical damage that may have occurred during shipping. Should there be any damage, immediately contact Marshall Electronics at (800) 800-6608. If you are not located within the continental
Streszczenie treści zawartej na stronie nr. 5
Front Panel Features 1 Power Button Turn the monitor on by pressing the power button. In the OFF state, the LED will shine brightly. The LED will dim when the monitor is turned on. 1 2 Input Select Buttons Use the input select buttons to select the input to be displayed: • Video • S-Video • YPbPr (SD/HD) 2 • VGA • DVI • SDI (HD on V-R151DP-AFHD) Each input automatically detects the applicable formats (See Compatible Input Formats – Page 7). 3 On-Screen Menu Navigation Buttons Use the Menu, ↑, ↓,
Streszczenie treści zawartej na stronie nr. 6
Rear Panel Features 1 4 3 2 Rear Panel Power Input Tally Interface 1 3 Connect the 12VDC input to the Conxall 2-pin twist-lock Each tally light is activated via the HD-15 connector by power input connector. Power can be supplied from the connecting the corresponding pin to ground. A variety of included power supply, or from a variety of DC sources external devices can be used to perform the contact supplying at least 3 Amps at 12 Volts. closure. No additional power should be supplied to the HD-1
Streszczenie treści zawartej na stronie nr. 7
Compatible Input Formats Format Composite S-Video YPbPr SDI VGA DVI-D NTSC ● ● PAL ● ● ● ● 480i / 59.94 576i / 50 ● ● 485p / 59.94 ● ● * ● 576p / 50 ● ● * ● ● 1035i / 60 ● ● * 1035i / 59.94 ● ● * 1080i / 60 ● ● * ● ● 1080i / 59.95 ● ● * ● ● 1080i / 50 ● ● * ● ● 1080psF / 24 ● ● * ● ● 1080psF / 23.98 ● ● * ● ● 1080p / 30 ● ● * 1080p / 29.97 ● ● * 1080p / 25 ● ● * 720p / 60 ● ● * ● ● 720p / 59.94 ● ● * ● ● 720p / 50 ● ● * ● ● 720p / 30 ● ● * 720p / 29.97 ● ● * 720p / 25 ● ● * ● ● 640 x 480 @ 60Hz
Streszczenie treści zawartej na stronie nr. 8
On-Screen Menu STRUCTURE OVERVIEW OFF, 13:9, 14:9, 4:3, 2.35:1, MARKER 16:9 1.85:1, 95%, 93%, 90%, 88%, 80% MARKER SETUP OFF, 95%, 93%, 90%, 88%, MARKER 4:3 80% MARKER BACKGROUND OFF, HALF, BLACK CENTER MARKER OFF, ON COLOR TEMP D55, D65, D93 RED (0-100) ADJ COLOR BIAS GREEN (0-100) BLUE (0-100) RED (0-100) ADJ COLOR GAIN GREEN (0-100) VIDEO CONFIG BLUE (0-100) MONO OFF, ON BLUE ONLY OFF, ON MAIN PIXEL TO PIXEL OFF, ON ASPECT RATIO 4:3, 16:9 SCAN NORMAL, UNDER DELAY OFF, H/V, V, H SMPTE BAR OFF,
Streszczenie treści zawartej na stronie nr. 9
On-Screen Menu (continued) MARKER SETUP SUBMENU Marker Setup Submenu ■ 16:9 Markers Use this setting to superimpose one of 10 markers on the screen when in 16:9 mode. This setting is disabled when the aspect ratio is set to 4:3, or when Pixel-to-Pixel ™, Underscan, or H/V Delay is enabled. • OFF (No Marker) • 13:9 Aspect Ratio • 14:9 Aspect Ratio • 4:3 Aspect Ratio • 2.35:1 Aspect Ratio • 1.85:1 Aspect Ratio • 95% Safe Area • 93% Safe Area • 90% Safe Area • 88% Safe Area • 80% Safe Area 16:9 Mar
Streszczenie treści zawartej na stronie nr. 10
On-Screen Menu (continued) MARKER SETUP SUBMENU (continued) ■ 4:3 Markers Use this setting to superimpose one of 5 markers on the screen when in 4:3 mode. This setting is disabled when the aspect ratio is set to 16:9, or when Pixel-to-Pixel ™, Underscan, or H/V Delay is enabled. • OFF (No Marker) • 95% Safe Area • 93% Safe Area • 90% Safe Area • 88% Safe Area • 80% Safe Area 4:3 Marker Examples: OFF (No Marker) 90% Safe Area ■ Marker Background Use this setting to choose how selected markers are
Streszczenie treści zawartej na stronie nr. 11
On-Screen Menu (continued) VIDEO CONFIGURATION SUBMENU Video Configuration Submenu ■ Color Temperature Presets Use this setting to choose one of three color temperature presets: • D55 (5500K) • D65 (6500K) • D93 (9300K) • USER (Adjustable Color Bias and Gain) ■ Adjusting Color Bias Color Bias Menu Use this submenu to adjust bias of the color response. Adjust the bias for each color to alter the white balance of the image. The Color Temperature preset will automatically switch to USER when Color
Streszczenie treści zawartej na stronie nr. 12
On-Screen Menu (continued) VIDEO CONFIGURATION SUBMENU (continued) ■ Monochrome Mode Use this setting to enable monochrome mode. Only the luminance of the image will be displayed as a grayscale picture. ■ Blue-Only Mode Use this setting to enable Blue-Only mode. This mode displays only the blue color component of the image, switching off the red and green components. Use this mode when calibrating the monitor to SMPTE color bars with the following procedure: 1. Allow the monitor to warm up for a
Streszczenie treści zawartej na stronie nr. 13
On-Screen Menu (continued) VIDEO CONFIGURATION SUBMENU (continued) ■ Aspect Ratio Settings Use to switch between 4:3 and 16:9 aspect ratios. As the V-R151DP-AFHD monitor has a native resolution of 1024 x 768 RGB pixels, incoming images are automatically scaled to fit the screen: • In 4:3 mode, images are scaled up or down to fill the entire 4:3 screen (1024 x 768). • In 16:9 mode, images are scaled to fill the maximum 16:9 portion of the screen (1024 x 576), with black bars filling the remainder
Streszczenie treści zawartej na stronie nr. 14
On-Screen Menu (continued) SYSTEM CONFIGURATION SUBMENU Video Configuration Submenu ■ Internal SMPTE Color Bars Use to display internally generated SMPTE split-field color bars. ■ User-Definable Function Buttons Use the FUNCTION 1 and FUNCTION 2 menu items to define each function button on the front panel of the monitor. The following options are available for each button: • DELAY Enable and rotate amongst delay modes. • RATIO Toggle between 4:3 and 16:9 aspect ratios. • BACK Rotate amongst mark
Streszczenie treści zawartej na stronie nr. 15
Specifications ■ ■ PANEL TALLY Screen Size 15.0” Diagonal 3 LEDs (Green, Red, Yellow). Activation requires contact Display Area (h x v) 304.128 x 228.096 mm closure of pin to ground on the HD-15 connector: Aspect Ratio 4:3 Native (4:3/16:9 Modes) Pin No. Signal Pixels 1024 x RGB x 768 1 Green Color Depth 16,777,216 Colors 2 Red Viewing Angle 150° x 150° 3 Yellow 2 4 Ground Brightness 500 cd/m 5 Ground Contrast Ratio 450:1 6 N/C Dot Pitch (h x v) 0.099 x 0.297 mm 7 N/C 8 N/C Pixel Pitch (h x v) 0
Streszczenie treści zawartej na stronie nr. 16
Specifications (continued) Maintenance ■ Screen Cleaning Periodically clean the screen surface using ammonia-free cleaning wipes (Marshall Part No. V-HWP-K). A clean micro- fiber cloth can also be used using only non-abrasive and ammonia-free cleaning agents. Do not use paper towels. Paper towel fibers are coarse and may scratch the surface of the polycarbonate faceplate or leave streaks on the surface. Antistatic and fingerprint resistant cleaning agents are recommended. Do not apply excessive
