Streszczenie treści zawartej na stronie nr. 1
TITAN: CG913 Series
JET: CG602Q, CG602M, CG902Q, CG902M
Gas cooktop
User guide NZ & AU
Streszczenie treści zawartej na stronie nr. 2
Streszczenie treści zawartej na stronie nr. 3
Contents Introducing your cooktop 2 TITAN MODELS (CG913 Series) Temperature control 3 Flame failure reignition system 4 Accessories 4 JET MODELS (CG602 & CG902 Series) Temperature control 6 Flame failure safety feature 7 Accessories 8 Hints and tips 10 Troubleshooting 11 Care and cleaning 12 Safety and warnings 14 Warranty 16 Customer Care 17 Important! SAVE THESE INSTRUCTIONS 1
Streszczenie treści zawartej na stronie nr. 4
Introducing your cooktop Now that your new cooktop is installed and ready to use, you will want to know everything about it to ensure excellent results right from the start. This booklet will introduce you to the features and special talents of your cooktop. We recommend you read the whole book before you start using your cooktop, for the sake of safety as well as success. First use Check that the cooktop is plugged in and the electricity switched on for the electronic ignition to work. 4 2
Streszczenie treści zawartej na stronie nr. 5
TITAN MODELS (CG913 Series) Temperature control Off 1 Choose the control knob for the burner you want to use. High 2 Press down gently and turn the knob anticlockwise to Low the high position. You do not need to hold the knob down. 3 All electrodes will spark until the selected burner ignites. Note: For the first burner selected there is a short delay before the safety valve allows gas to flow to the Burner cooktop. ON light 4 Adjust the flame anywhere between the High and the Low po
Streszczenie treści zawartej na stronie nr. 6
TITAN MODELS (CG913 Series) Flame failure reignition system In the event of the flame being accidentally blown out, the flame failure reignition system will detect this, and the electrode will spark and relight the flame. If no flame is detected after about five seconds, the gas supply to the appliance will be shut off and the burner ‘ON’ indicator light will flash slowly. The burner must be turned OFF and restarted to resume cooking. Power failure In the event of a power failure, the gas sup
Streszczenie treści zawartej na stronie nr. 7
TITAN MODELS (CG913 Series) Using the Simmermat The Simmermat helps you control the temperature of your cooking surface to ensure the long slow simmering that is needed for successfully cooking delicate foods. Use at low heat only. Always remember it is for simmering and exposure to extreme heat may distort it. To use the Simmermat 1 First cook the food, or bring to the boil, over high heat. 2 Then reduce the heat and carefully place the Simmermat over the flame with the points facing
Streszczenie treści zawartej na stronie nr. 8
JET MODELS (CG602 & CG902 Series) Temperature control Off 1 Choose the control knob for the burner you want to High use. 2 Press down gently and turn the knob anticlockwise to the high position. All electrodes will spark until you release the knob. Hold down the knob for approximately five seconds as releasing it too soon may extinguish the flame. 3 Adjust the flame anywhere between the High and Low positions. Do not adjust the flame between High and Off. Low If the cooktop does not
Streszczenie treści zawartej na stronie nr. 9
JET MODELS (CG602 & CG902 Series) Flame failure safety feature Some cooktops have a flame failure safety thermocouple fitted (see previous diagram). When lighting the burner on flame failure models, hold the knob down for five seconds after the burner has lit. Releasing the burner knob too soon will extinguish the flame. In the event of the burner flame being accidentally blown out, the flame failure safety device will cut off the gas supply. Before relighting the burner, turn the knob o
Streszczenie treści zawartej na stronie nr. 10
JET MODELS (CG602 & CG902 Series) Accessories Using the skillet (CG902 series only) Season your skillet before using for the first time. See below. Your skillet will offer you a quick, hot method of cooking which is ideal for tender cuts of meat, panini, chargrilled vegetables, pikelets and pancakes. Best results are obtained by placing the skillet over the fish burner (CG902 series only). Always use medium to high temperatures and heat the skillet well before cooking on it. Oil t
Streszczenie treści zawartej na stronie nr. 11
JET MODELS (CG602 & CG902 Series) Using a wok When using any wok, make sure it does not Wok on raised push any other pots and pans aside. This area of pan could make them unstable, or deflect heat support onto nearby walls or the benchtop. Only use the circular wok ring supplied with your Jet cooktop for wok cooking. Wok ring Coffee pot support For the simmer and semi-rapid burners, pots should be larger than 12 cm in diameter (smaller pots can be used with the coffee pot support). The
Streszczenie treści zawartej na stronie nr. 12
Hints and tips To get the best out of your cooktop follow these simple suggestions. Do not use an asbestos mat between the flame and the saucepan as this may cause serious damage to your cooktop. Never use plastic or aluminium foil dishes on the burners. Saucepans should have thick flat bottoms. Food in a saucepan with an uneven bottom will take longer to cook. Very heavy saucepans may bend the pan support or deflect the flame. Match the bottom of your saucepans with the cooking zone of t
Streszczenie treści zawartej na stronie nr. 13
Troubleshooting Problem Possible solutions My cooktop does not Check the cooktop is plugged in and the power is switched light on. The gas electrodes may be dirty. These can be easily cleaned with a toothbrush and methylated spirits. The burner parts may not be located properly. Check the assembly and make sure the burner cap is sitting flat. Check the gas supply valve is turned on and the supply to the house is working. Gas should be heard when you turn a burner on. The burner parts may
Streszczenie treści zawartej na stronie nr. 14
Care and cleaning Clean regulary – do not let stains become burnt on. Use soapy water and a soft sponge or cloth (use the mildest cleaner that will do the job). Rinse with clean water to ensure no cleaner residue is left (when heated this can stain the cooktop). Dry thoroughly to avoid leaving water marks. Clean brushed stainless steel in the direction of the grain. Soak stubborn stains under a soapy cloth. Pan supports etc. are dishwasher safe. For stubborn stains, see the following char
Streszczenie treści zawartej na stronie nr. 15
Care and cleaning Cooktop part Cleaning Important Always allow cooktop parts to Pan supports, Hot soapy water and nylon scourer. cool completely before cleaning burner caps & Soaking in a solution of biological them. Simmermat clothes washing detergent eg Remove spills as soon as the Enamel finish Drive® burner caps are cool to avoid Mild abrasive cleansers eg Jif® the soil becoming burnt on. Fume free oven cleaner eg Mr Muscle® Heavy duty oven cleaner eg Mr Muscle® Reassembl
Streszczenie treści zawartej na stronie nr. 16
Safety and warnings WARNING! Hot Surface Hazard This appliance becomes hot during use. Care should be taken to avoid touching cooktop components, burners, pan supports and stainless steel base. WARNING! Household appliances are not intended to be played with by children. Children, or persons with a disability which limits their ability to use the appliance, should have a responsible person to instruct them in its use. The instructor should be satisfied that they can use the appliance w
Streszczenie treści zawartej na stronie nr. 17
Electrical supply cord If the electrical supply cord is damaged, it must only be replaced by an authorised person. Ensure that the electrical connection plug is accessible after installation. Marine craft & caravan installation Where this appliance is installed in marine craft or in a caravan, it shall not be used as a space heater. Ventilation The use of a gas cooking appliance results in the production of heat and moisture in the room in which it is installed. Ensure the kitchen is well
Streszczenie treści zawartej na stronie nr. 18
Warranty When you purchase any new Fisher & Paykel whiteware product you automatically receive a two year Manufacturer’s Warranty covering parts and labour for servicing. Fisher & Paykel undertakes to Repair or, at its option, replace without cost to the owner either for material or labour any part of the product, the serial number of which appears on the product, which is found to be defective within TWO YEARS of the date of purchase. This warranty does not cover A. Service calls that are
Streszczenie treści zawartej na stronie nr. 19
Customer Care Check the things you can do yourself. Refer to your user guide and check: www.fisherpaykel.com 1 Your appliance is correctly installed 2 You are familiar with its normal operation If after checking these points you still need assistance please refer to the following: In New Zealand If you need assistance...* Call your Fisher & Paykel retailer who is trained to provide information on your appliance, or if we can be of any further help, please contact our Customer Care Centre
Streszczenie treści zawartej na stronie nr. 20
Notes 18
