Manual do usuário Audiovox PRO 9445FT

Resumo do conteúdo contido na página número 1

Model PRO 9445FT
Installation Manual
REMOTE KEYLESS ENTRY
PRE-INSTALLATION NOTES:
DIPSWITCHES:
This unit incorporates three on - board dip switches for selection of optional features. They are;
ON OFF
Dip Switch #1 Auto Lock/Unlock No Auto Lock/Unlock
Dip Switch #2 Passive Lock ActiveLocks
Dip Switch #3 Passive Starter Inhibit ActiveStarterInhibit
STARTERDISABLE:
This system provides a transistorized output to control the starter cut feature.
When the starter cut relay is installed, any time the

Resumo do conteúdo contido na página número 2

VALETSWITCH: Select a mounting location for the switch that is easily accessible to the driver of the vehicle. The switch does not have to be concealed, however concealing the switch is always recommended, as this provides an even higher level of security to the vehicle. The switch is mounted by drilling a 1/4" diameter hole in the selected location. Be sure to check behind the dash for adequate clearance for the body of the switch, and to confirm the drill will not damage any existing component

Resumo do conteúdo contido na página número 3

DARKBLUEWIRE:CHANNEL2OUTPUT The dark blue wire pulses to ground via an independent RF channel from the keychain transmitter. This is a transistorized, low current (300 mA) output, and should only be used to drive an external relay coil or trigger inputs for optional devices. WARNING:Connectingthedarkbluewiretothehighcurrentswitchedoutputoftrunkreleasecircuitswilldamage thecontrolmodule. Connect the dark blue wire to terminal 86 of the AS-9256 relay (or an equivalent 30 Amp. automotive relay), co

Resumo do conteúdo contido na página número 4

© 1998 Audiovox Corporation, Hauppauge, N.Y. 11788 1-800-645-4994 128-5393