Resumo do conteúdo contido na página número 1
Always there to help you
Register your product and get support at
www.philips.com/welcome
CE132
Question?
Contact
Philips
User manual
Resumo do conteúdo contido na página número 2
Resumo do conteúdo contido na página número 3
Contents Contents 10 Product Information 20 1 Safety 2 11 Troubleshooting 21 2 Your car audio system 3 Introduction 3 What's in the box 3 12 Notice 22 Overview of the system 4 Care of the environment 22 Trademark notice 22 Copyright 22 3 Install the car audio system 7 Connect wires 7 Mount into the dashboard 8 13 Glossary 23 Attach the front panel 9 4 Get started 10 For the first time use 10 Set the time format 10 Set the clock 10 Select a source 10 Select a listening zone 10 Mute the button bee
Resumo do conteúdo contido na página número 4
1 Safety Read and understand all instructions before you use this device. If damage is caused by failure to follow instructions, the warranty does not apply. • Modification of the product could result in hazardous radiation of EMC or other unsafe operation. • The device is designed for negative ground (earth) 12 V DC operation only. • To ensure safe driving, adjust the volume to a safe and comfortable level. • Improper fuses can cause damage or fire. When you need to change the fuse, con
Resumo do conteúdo contido na página número 5
• ID3 tag V2.0 or later 2 Your car audio • Unsupported files: AAC, WAV, and PCM files system DRM protected WMA files (.wav, .m4a, .m4p, .mp4, and .aac) WMA files in lossless format Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product What's in the box at www.philips.com/welcome. Check and identify the contents of the package: ab c Introduction With this system, you can: • enjoy audio from USB storage devices,
Resumo do conteúdo contido na página número 6
Overview of the system ab cd e tsrq po nm lk jihf g uv f MP3-LINK a • Connect to the audio output socket • Unlock the front panel. (usually the headphone socket) of an b external device. • For .wma and .mp3 tracks, press to g select the previous folder. • Start, pause, or resume the play of • Press and hold to access the system tracks. menu. • In radio mode, press to select the • Press to select a tuner band. preset radio station of No. 6. c • In radio mode, press and hold to store
Resumo do conteúdo contido na página número 7
• For .wma and .mp3 tracks, press to h access the track list. • In radio mode, press to select the preset radio station of No. 5. m /DSP • In radio mode, press and hold to store • Press repeatedly to display available the current radio station at channel information about the current track. No. 5. • Press repeatedly to display available RDS information. i • Press and hold to display the set clock. • In radio mode, press to select the preset radio station of No. 4. n AS/SOURCE • In radi
Resumo do conteúdo contido na página número 8
s • Press to enable or disable the maximum volume. • Press and hold to enable or disable the DBB (dynamic bass boost) sound effect. t BAND • Press repeatedly to select a tuner band. u Slot for SD/SDHC card • Insert an SD/SDHC card. v RESET • Press to reset the system to factory default settings. 6 EN
Resumo do conteúdo contido na página número 9
3 Install the car Connect wires audio system Note • The ISO male connectors are not supplied. • Make sure that all loose leads are insulated with Caution electrical tape. • Consult a professional to connect wires as instructed below. • Use the controls only as stated in this user manual. 1 Check the car's wiring carefully and connect Always follow the instructions in this chapter in them to the the ISO male connectors. sequence. These instructions are for a typical installation. However, if
Resumo do conteúdo contido na página número 10
53.5 mm 183 mm 183 mm 2 Connect the antenna and amplifier as 1 Make sure that the car dashboard opening illustrated, if applicable. is within these measurements: L REAR R d cb a 2 Remove the mounting sleeve with the supplied disassembly tools. Sockets on rear External sockets or panel connectors 1 For ISO male As indicated above connectors 2 REAR L Rear left speaker 3 REAR R Rear right speaker 4 ANTENNA Antenna Tip • The pin arrangement for the ISO connectors depends on the type of
Resumo do conteúdo contido na página número 11
4 Slide the unit into the sleeve until you hear a "click". 2 Press the left end of the front panel inwards until it is securely locked with a "click". 5 Attach the trim plate. Detach the front panel Note • Before you insert an SD/SDHC card or reset the system, detach the front panel. • Before you detach the front panel, make sure that the system is turned off. 1 Press to release the front panel. 6 Reconnect the negative terminal of the car battery. 2 Pull the front panel outwards
Resumo do conteúdo contido na página número 12
4 Get started Set the clock 1 Press and hold to access the system menu. 2 Press / repeatedly until [CLK] is For the first time use displayed with time digits blinking. 3 Rotate anti-clockwise to set the hour. 1 Press to turn on the system. 4 Rotate clockwise to set the minute. » [PHILIPS] is displayed and then [SELECT OPERATING REGION] (select a radio region) scrolls. Display the clock 2 When one of the following options is Press and hold /DISP until [CLK] and the set displayed, rot
Resumo do conteúdo contido na página número 13
2 Press / repeatedly to select a listening zone. Mute the button beep The beep sound of buttons is enabled by default. 1 Press and hold to access the system menu. 2 Press / repeatedly until [BEEP ON] or [BEEP OFF] is displayed. • [BEEP ON]: Enable the beep sound of buttons. • [BEEP OFF]: Mute the beep sound of buttons. 3 Rotate to change the setting. EN 11
Resumo do conteúdo contido na página número 14
5 Listen to radio Search for a radio station Search for a radio station automatically Select a tuner region Press or to search for the previous or next radio station with strong signals. You can select a radio region that matches your location. 1 In radio mode, press and hold to access Search for a radio station manually the system menu. 1 Press and hold or until [M] blinks. 2 Press / repeatedly until one of the 2 Press or repeatedly until the following options is displayed. targe
Resumo do conteúdo contido na página número 15
2 Tune to the radio station that you want to 4 Rotate to select a program type, and store. then press to confirm. 3 Press and hold , , , , Item Program Description , or to store the radio station at the type selected channel. 1 NEWS News services • To select a stored radio station, press 2 AFFAIRS Politics and current , , , , , or . affairs 3 INFO Special information programs Play with RDS 4 SPORT Sports 5 EDUCATE Education and advanced The RDS (Radio Data System) function train
Resumo do conteúdo contido na página número 16
Tip Use alternate frequencies • When a traffic announcement cuts in, you can press If the signal of an RDS station is poor, enable the AF (Alternate Frequency) function to search to switch the system to the previous mode. for another station that broadcasts the same program. 1 Press and hold to access the system Synchronize the system clock menu. You can synchronize the system clock with an 2 Press / repeatedly until [AF ON] or RDS station that transmits time signals. [AF OFF] is displ
Resumo do conteúdo contido na página número 17
6 Play from a Control play storage device Button Function Press repeatedly to select a folder. / Pause or resume play. Press to play the previous or next / track. Press and hold to rewind a track / or search forward fast. Press repeatedly to display /DISP available information about the current track. Press repeatedly to select a repeat mode: • [REP ONE]: repeat the current track, • [RPT FLD]: repeat all tracks in the current folder, or • [RPT ALL]: repeat all tracks in the
Resumo do conteúdo contido na página número 18
Switch folders for a track 1 Press to access the folder list. » The name of current folder scrolls. 2 Rotate to toggle through folders. 3 Press to select the folder. » The system starts playing the first track under the folder. 16 EN
Resumo do conteúdo contido na página número 19
7 Listen to an external player You can use the system to amplify the audio input from an external player, for example, MP3 player. MP3-LINK 1 Switch the source to [MP3--LINK]. 2 Connect an MP3 link cable to • the MP3-LINK socket on the system, and • the audio output socket (usually the headphone socket) on the external player. 3 Play the external player. EN 17
Resumo do conteúdo contido na página número 20
8 Adjust sound The following operations are applicable to all supported media. Button Function Rotate to increase or decrease the volume level. Press to mute the speakers or release them from mute status. Press to enable or disable the maximum volume. Press and hold to enable or disable the Dynamic Bass Boost (DBB) effect. Press repeatedly to select a sound equalizer. 1 Press and hold to activate the setup of customized sound equalizer. 2 Press repeatedly to select an option: [BAS] (bass
