Manual do usuário Audiovox CP-250

Resumo do conteúdo contido na página número 1

INSTALLATION GUIDE FOR:
CHRYSLER, PLYMOUTH,
& DODGE VEHICLES
MODEL CP-250
Printed in Korea Form No. 128-4729A
RADIOPREPARATION:
1. Select two of the five mounting tabs provided and match the radio mounting style of the vehicle accord-
ing to Figures 1 through 3 below.
NOTE: Tab number is stamped on bottom of tab.
2. Attach the mounting tabs to the radio chassis with the two M4 X 5 screws provided.
3. Attach the 14-pin connector harness provided to the radio.
FIG. 1
TAB #2
M4 SCREW
TAB #1
M4 SCRE

Resumo do conteúdo contido na página número 2

RADIOINSTALLATION: 1. Remove dash panel from vehicle to expose sub-dash. 2. Remove and discard radio dummy panel attached to sub-dash. NOTE: Do not discard hardware for dummy panel. 3. Pre-wire radio including antenna wire. Attach ring lug on ground wire (black w/white stripe) from radio harness side and the vehicle side grounding strap to the rear of the radio chassis using the M5 x 8 screw provided. See Fig. 4 below. 4. Install radio into sub-dash of vehicle using the M6 x 18 self-tapping scre