Resumo do conteúdo contido na página número 1
Resumo do conteúdo contido na página número 2
Resumo do conteúdo contido na página número 3
MP6612i TABLE OF CONTENTS Introduction ..............................................................................................1 Installation ................................................................................................2 Wiring .......................................................................................................5 Front Panel Release ................................................................................6 Operation ..............................
Resumo do conteúdo contido na página número 4
MP6612i ii
Resumo do conteúdo contido na página número 5
MP6612i INTRODUCTION Congratulations on your purchase of the Jensen MP6612i Mobile Receiver. • USB - Supports Hard Drives and Flash Memory Drives It’s a good idea to read all of the instructions before beginning the • SD Card - Playback of MP3 and WMA files installation. We recommend having your Jensen MP6612i installed by a • 3.5mm Audio Only Input reputable installation shop. Chassis Features • Detachable Faceplate • 1.0 DIN (Import / ISO-DIN Mountable) CD / MP3 / WMA • Full Dot Matrix LCD Dis
Resumo do conteúdo contido na página número 6
I I / MP6512i UNVERSAL SERAL BUS R SEA AT DY CH/CAT MP6612i INSTALLATION This unit is designed for installation in cars, trucks and vans with an existing 2. Remove Transport Screws radio opening. In many cases, a special installation kit will be required to mount the radio to the dashboard. These kits are available at electronics TRANSPORT SCREWS supply stores and car stereo specialty shops. Always check the kit HALF application before purchasing to make sure the kit works with your vehic
Resumo do conteúdo contido na página número 7
MP6612i 2. Install the radio/mounting plate assembly to the sub-dashboard CAUTION: For proper operation of the CD player, the chassis must be according to the instructions in the installation kit. mounted within 20° of horizontal. 3. Attach the support strap to the radio and dashboard as described in the Universal Installation instructions. 4. Place the radio in front of the dashboard opening so the wiring can be 4. Replace the dashboard trim panel. brought through the mounting sleeve. Foll
Resumo do conteúdo contido na página número 8
MP6612i back until they lock, then pull the radio out. If removal keys are inserted at an angle, they will not lock properly and will not release the unit. Sleeve Removal Key Trim Ring Removal Key Technical Assistance If you require assistance, contact Technical Support at 1-800-323-4815 from 9:00am to 6:00pm EST Monday through Friday. 4
Resumo do conteúdo contido na página número 9
MP6612i WIRING NOTE: The amplifier in this radio is only designed for use with four speakers. Never combine (bridge) outputs for use with two speakers. Never ground negative speaker leads to chassis ground. Failure to wire exactly as shown may cause electrical damage to DATA BUS the radio. NOTE: Only connect speakers with a nominal impedance of 4 DATA BUS ohms. Speakers with a load impedance less than 4 ohms could damage the unit. SAT L SAT R SAT R (Red) Rear Line out Gray L (White) F
Resumo do conteúdo contido na página número 10
MP6612i FRONT PANEL RELEASE The open button (1) releases the mechanism that holds the front panel to the chassis. Detaching the Front Panel To detach the front panel: 1. Press and hold the power button (2) to turn the unit off. 2. Press and hold the open button (1). The panel will slide down. You must press and hold to avoid ejecting the CD, if present. 3. Pull to release the right side of the panel. 4. Pull the left side of the panel to remove it. 5. After removing the front panel, store it
Resumo do conteúdo contido na página número 11
E E N N O O H H P P MP6612i OPERATION Power Press the power button (2) to turn the unit on. Press and hold the power MP6612i button again to turn the unit off. TUNE / TRACK / DISP PTY NOTE: LCD panels may take longer to respond when subjected to cold RADIO READY CH/CAT temperatures for an extended period of time. In addition, the visibility SCAN AS of the numbers on the LCD may decrease slightly. The LCD display MENU/ENTER-PRESS iPod will return to normal when the temperature increases to a
Resumo do conteúdo contido na página número 12
MP6612i • LEVEL Quality Factor options: 1N, 2N, 2W, 1W. The following chart depicts the Turn the rotary encoder clockwise to increase or counter-clockwise to curve characteristics for each step: decrease the Bass level from “-6” to “+6”. “0” represents a flat response. Middle Quality Factor Curve Characteristics • Bass Center Frequency (C. FREQ) Turn the rotary encoder clockwise to adjust the Bass Center Frequency to 60, 80, 100 or 200Hz. • Bass Quality Factor (BASS-Q) Turn the rotary encoder
Resumo do conteúdo contido na página número 13
MP6612i Subwoofer (SUB-W) Programmable Turn-on Volume Level (VOL SEL) To adjust Subwoofer options, press the MENU button (22) until “SUB-W” Press the MENU button (22) to select “Last” or “Adjust”. appears in the display. Press the TUNE/TRACK >>| or |<< buttons (19) to • Last access the following settings: When the unit is turned on, the volume will resume at the level selected • SUB-W when last turned off. Turn the rotary encoder to turn the subwoofer feature ON/OFF. • Adjust • LEVEL After sel
Resumo do conteúdo contido na página número 14
MP6612i Reset Button The RESET button (4) is located on the front panel below the rotary encoder. The reset circuitry protects the microprocessor circuitry. Since resetting the unit will erase the time and preset memories, it should only be activated upon initial installation after all wiring is complete, or if there is a malfunction of any of the switches on the unit. In these circumstances, pressing the RESET button will clear the system and return the unit to normal operation. 10
Resumo do conteúdo contido na página número 15
E N O H P MP6612i TUNER OPERATION The MP6612i allows you to receive channels in U.S.A. or EUROPE mode. Preview Scan See “Frequency Spacing (Area)” on page 9 to learn how to change the Press the SCAN button (16) to scan all strong stations in the current band. tuner options. The unit will stop at each station for five seconds before continuing to the next station. Press SCAN again to stop scanning and listen to the current station. Automatic Store (AS) MP6612i Select six strong stations and s
Resumo do conteúdo contido na página número 16
MP6612i • Language (foreign) • Religious Music • Religious Talk • Personality • Public • College • Weather • Emergency Test • Emergency To search for stations in a PTY category: 1. Press the PTY button (17) to view the current PTY category. 2. Turn the rotary encoder (22) to move through the list of available categories. 3. After 2 seconds of inactivity, the radio will automatically scan and play the first station it locates in the selected category. NOTE: PTY is a new broadcast technology th
Resumo do conteúdo contido na página número 17
E N O H P MP6612i CD PLAYER OPERATION Insert CD Intro Scan (INT) 1. Press the OPEN/EJECT button (1) and the motorized front panel will During disc play, press the INT button (9) to select “INT ON” and play the slide down automatically to display the disc slot. first 10 seconds of each track on the disc. When the desired track is • If a disc is already present, it will be ejected. Remove the ejected reached, press INT again to end the scan and play the selected track. disc before proceeding. Re
Resumo do conteúdo contido na página número 18
MP6612i MP3/WMA OPERATION MP3 and WMA (Windows Media Audio) music files are digital audio files MP3/WMA Encoder and CD Writer Settings that are compressed to allow more files on a single CD. This unit can play Use the following settings when compressing audio data with the MP3 MP3/WMA directly from files contained on a CD-R/RW, SD card or USB encoder. device using the buttons on the receiver (or optional remote control) as • Transfer bit rate: 8 - 320 kbps described below. Many types of soft
Resumo do conteúdo contido na página número 19
MP6612i Bit Rates Loading an SD Card Insert the SD card, label side down, into the SD slot on the front of the The unit supports bit rates from 32 - 320 kbps. 2 MP3 Playing Order MediaLink . The unit will display “Card Read” and read the files on the card automatically. “SD” is shown in the upper left hand corner of the LCD when When selected for play, files and folders (Folder Search, File Search or in SD mode. Folder Select) are accessed in the order they were written by the CD writer. As
Resumo do conteúdo contido na página número 20
E N O H P MP6612i • To turn off intro scan and play the current track, press the INT button until “INT” disappears from the display. MP6612i Repeat (RPT) TUNE / TRACK • Press the RPT button (10) once to select “RPT ON” and repeatedly play / DISP PTY RADIO the current file. READY CH/CAT SCAN AS • Press RPT twice to select “RPT FOLD” and repeatedly play all files in MENU/ENTER-PRESS iPod the current folder. 1 2 INT 3 RPT 4 RDM 5 6 UP DN Menu • To turn off repeat play, press the RPT button unt
