Manual do usuário Graco Inc. DURON 308-646

Manual para o dispositivo Graco Inc. DURON 308-646

Dispositivo: Graco Inc. DURON 308-646
Categoria: Pulverizador de tinta
Fabricante: Graco Inc.
Tamanho: 1.22 MB
Data de adição: 8/19/2013
Número de páginas: 36
Imprimir o manual

Baixar

Como usar?

Nosso objetivo é fornecer-lhe o mais rapidamente possível o acesso ao conteúdo contido no manual de instruções para Graco Inc. DURON 308-646. Usando a pré-visualização online, você pode visualizar rapidamente o índice e ir para a página onde você vai encontrar a solução para seu problema com Graco Inc. DURON 308-646.

Para sua conveniência

Se a consulta dos manuais Graco Inc. DURON 308-646 diretamente no site não for conveniente para você, você tem duas soluções possíveis:

  • Visualização em tela cheia - Para visualizar facilmente o manual do usuário (sem baixá-lo para seu computador), você pode usar o modo de tela cheia. Para começar a visualização do manual Graco Inc. DURON 308-646 no modo de tela cheia, use o botão Tela cheia.
  • Download para seu computador - você também pode baixar o manual Graco Inc. DURON 308-646 em seu computador e mantê-lo em suas coleções. No entanto, se você não quer perder espaço no seu dispositivo, você sempre pode baixá-lo no futuro a partir de ManualsBase.
Graco Inc. DURON 308-646 Manual de instruções - Online PDF
Advertisement
« Page 1 of 36 »
Advertisement
Versão para impressão

Muitas pessoas preferem ler os documentos não na tela, mas na versão impressa. A opção de imprimir o manual também foi fornecida, você pode usá-la clicando na hiperligação acima - Imprimir o manual. Você não precisa imprimir o manual inteiro Graco Inc. DURON 308-646, apenas as páginas selecionadas. Respeite o papel.

Resumos

Abaixo você encontrará previews do conteúdo contido nas páginas subseqüentes do manual para Graco Inc. DURON 308-646. Se você deseja visualizar rapidamente o conteúdo das páginas subseqüentes, você pode usá-los.

Resumos do conteúdo
Resumo do conteúdo contido na página número 1

INSTRUCTIONS–PARTS LIST 308–646
Rev. B
This manual contains important
Supercedes Rev. A
warnings and information.
READ AND RETAIN FOR REFERENCE
ELECTRIC, 120 VAC
Performance 390
Airless Paint Sprayer
2750 psi (195 bar) Maximum Working Pressure
Model 231–553, Series A
Complete sprayer with hoses, gun, RAC IV DripLess
Tip Guard and SwitchTip

GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441
COPYRIGHT 1996, GRACO INC.
Graco Inc. is registered to I.S. EN ISO 9001

Resumo do conteúdo contido na página número 2

Table of Contents Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ON/OFF Switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Component Identification and Function . . . . . . . . . . . 5 Drive Housing, Connecting Rod, Crankshaft . . . . . . 28 Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Pressure Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Operation . . . . . . . .

Resumo do conteúdo contido na página número 3

WARNING WARNING INJECTION HAZARD Spray from the gun, leaks or ruptured components can inject fluid into your body and cause ex- tremely serious injury, including the need for amputation. Fluid splashed in the eyes or on the skin can also cause serious injury.  Fluid injected into the skin is a serious injury. The injury may look like just a cut, but it is a serious injury. Get immediate medical attention.  Do not point the gun at anyone or at any part of the body.  Do not put your hand or fin

Resumo do conteúdo contido na página número 4

WARNING WARNING EQUIPMENT MISUSE HAZARD Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury. INSTRUCTIONS  This equipment is for professional use only.  Read all instruction manuals, tags, and labels before operating the equipment.  Use the equipment only for its intended purpose. If you are not sure, call your distributor.  Do not alter or modify this equipment.  Check equipment daily. Repair or replace worn or damaged parts immediately.  Do not

Resumo do conteúdo contido na página número 5

Component Function and Identification B N C A H E K  G D M L F J  Fig. 1 A Motor DC motor, 120 Vac, 15A, 1 phase B Drive Assembly Transfers power from DC motor to the displacement pump C Pressure Adjusting Knob Controls fluid outlet pressure D ON/OFF Switch Power switch that controls 120 Vac power to sprayer E Fluid Outlet Hose and spray gun is connected here F Displacement Pump Pressurizes fluid to be sprayed through spray gun G 50 ft (15 m) Main Hose 1/4 in. ID, grounded, nylon hose

Resumo do conteúdo contido na página número 6

Setup 2. Fill the wet–cup (102). Pry off the wet-cup seal. WARNING Fill the cup 1/3 full with Graco Throat Seal Liquid (TSL), supplied. Install the wet-cup seal. If you supply your own hoses and spray gun, be sure the hoses are electrically conductive, that the 3. Plug in the sprayer. Be sure the ON/OFF switch gun has a tip guard, and that each part is rated for (52) is OFF. Plug the cord into a grounded outlet at at least 2750 psi (195 bar) Working Pressure. This least 20 feet away from the spr

Resumo do conteúdo contido na página número 7

Operation How to use the gun trigger safety  Open or drain, position When engaged, the gun safety latch prevents the gun  Closed, or spray position from accidental triggering. See Fig. 3. WARNING INJECTION HAZARD If the gun still sprays when the gun trig-  ger safety is locked, repair the gun. See manual 308–235, supplied.  Gun safety latch  shown engaged 04646 Gun safety latch Fig. 4  shown disengaged How to use the pressure control. The pressure control controls the motor operation so th

Resumo do conteúdo contido na página número 8

Operation How to use the RAC IV tip guard. WARNING   INJECTION HAZARD To reduce the risk of serious injury, Tip handle shown in whenever you are instructed to relieve  spraying position. pressure, follow the Pressure Relief Turn handle 180,  Procedure on page 9. trigger gun to clear clog  Fig. 6 How to remove a tip clog. 1. Release the gun trigger. Lock the safety latch. Ro- The tip guard alerts you to the risk and helps prevent tate the RAC IV tip handle 180. See Fig. 6. placing an

Resumo do conteúdo contido na página número 9

Startup NOTE: If this is a first-time startup, flush the sprayer. WARNING See page 13. INJECTION HAZARD NOTE: Refer to Fig. 9 and the other figures referenced The system pressure must be manually in the text as you start the sprayer. relieved to prevent the system from starting or spraying accidentally. Fluid 1. Open the pressure drain valve (42). See Fig. 7. under high pressure can be injected through the skin and cause serious injury. To reduce the risk of 2. Don’t install the spray tip until

Resumo do conteúdo contido na página número 10

Startup b. If more coverage is needed, use a larger tip WARNING rather than increasing the pressure. FIRE AND EXPLOSION HAZARD To reduce the risk of static sparking and c. Adjust the direction of the spray pattern. See splashing when priming or flushing the Fig. 8. Engage the gun safety latch. Loosen system, hold a metal part of the gun the retaining nut (A). Position the tip guard for firmly to the side of a grounded metal pail before a horizontal or vertical pattern. Hold the tip triggering th

Resumo do conteúdo contido na página número 11

Startup 32  1/4 npsm(m) fluid outlet 33  Do not install any shutoff device here  Rotate clockwise to increase pressure  64  Shown in closed or spray position  Fill 1/3 full with TSL   28 74 52  102  67  Fig. 9  

Resumo do conteúdo contido na página número 12

Shutdown and Care WARNING WARNING INJECTION HAZARD INJECTION HAZARD See the warning section INJECTION To reduce the risk of serious injury, HAZARD on page 3 for information on whenever you are instructed to relieve the hazard of using damaged hoses. pressure, follow the Pressure Relief Procedure on page 9. Shutdown and Care Turn packing  nut clockwise to tighten 1. Check the packing nut/wet-cup daily (102). Re- lieve pressure first. Keep the wet-cup 1/3 full of TSL at all times to help prevent

Resumo do conteúdo contido na página número 13

Flushing 3. Pour one-half gallon (2 liters) of compatible solvent When to Flush into a grounded metal flushing pail. Put the suction 1. Before using a new sprayer: flush out the oil hose in the pail. which was left in to protect pump parts. 4. Open the pressure drain valve. See Fig. 4, page Before using water-base paint: flush with min- 7. eral spirits followed by soapy water, and then a clean water flush. 5. To save the paint still in the pump and hose, follow Step 6, except put the drain tube

Resumo do conteúdo contido na página número 14

Troubleshooting WARNING INJECTION HAZARD To reduce the risk of serious injury, whenever you are instructed to relieve pressure, follow the Pressure Relief Procedure on page 9. Basic Problem Solving Check everything in the troubleshooting table before disassembling the sprayer. TYPE OF PROBLEM WHAT TO CHECK WHAT TO DO If check is OK, go to next check When check is not OK, refer to this column Fluid pressure 1. Check pressure control knob setting. The pump 1. Slowly increase pressure setting to se

Resumo do conteúdo contido na página número 15

Basic Problem Solving TYPE OF PROBLEM WHAT TO CHECK WHAT TO DO If check is OK, go to next check When check is not OK, refer to this column Electrical (continued) 5. Check motor armature commutator for burn 5. Remove motor and have motor shop spots, gouges and extreme roughness. Re- resurface commutator if possible. See move motor cover and brush inspection plates page 26. to check. See page 20. 6. Check motor armature for shorts using arma- 6. Replace motor. See page 26. ture tester (growler) or

Resumo do conteúdo contido na página número 16

Intermediate Problem Solving TYPE OF PROBLEM WHAT TO CHECK WHAT TO DO If check is OK, go to next check When check is not OK, refer to this column Low output (continued) 3. Release gun trigger. Observe resting position of 3. If pump consistently comes to rest with pump rod (107). rod (107) fully extended, the piston pack- ings and/or piston valve may be worn. Service the pump. See page 22. 4. Check electrical supply with volt meter. Meter 4. Reset building circuit breaker; replace should read 105

Resumo do conteúdo contido na página número 17

Intermediate Problem Solving TYPE OF PROBLEM WHAT TO CHECK WHAT TO DO If check is OK, go to next check When check is not OK, refer to this column 1. Spray tip worn beyond sprayer pressure capa- 1. Replace spray tip. Spray Pattern Variations bility. NOTE: A smaller size tip will provide longer life. 2. Check transducer (29) for wear or damage. 2. Replace transducer. See page 31. 3. Check pressure control (64) for smooth opera- 3. Replace pressure control. See page 30. tion. 4. Check Low output se

Resumo do conteúdo contido na página número 18

Motor Test WARNING INJECTION HAZARD To reduce the risk of serious injury, whenever you are instructed to relieve pressure, follow the Pressure Relief Procedure on page 9. B For checking armature, motor winding and brush elec- trical continuity. Setup A Remove the drive housing. See page 28. This is to ensure that any resistance you notice in the armature test is due to the motor and not to worn gears in the drive housing. Remove the motor brush inspection covers (A). See Fig. 12.  Fig. 12 R

Resumo do conteúdo contido na página número 19

General Repair Information WARNING WARNING INJECTION HAZARD HOT SURFACE HAZARD During operation, the motor and drive To reduce the risk of serious injury, housing become very hot and could burn whenever you are instructed to relieve your skin if touched. Flammable materi- pressure, follow the Pressure Relief als spilled on the hot, bare motor could cause a fire Procedure on page 9. or explosion Tool List CAUTION These are the tools required to service all parts of the To reduce the risk of a pr

Resumo do conteúdo contido na página número 20

Motor Brushes NOTE: Replace brushes when worn to about 0.5 in.  Motor lead; do not disconnect (12.5 mm). Always check both brushes. Brush Repair  Minimum 0.5” (12.5 mm) Kit 236–967, which includes spring clip 112–766, is  Included in Brush Repair available for motors manufactured by Pacific Scientific. Kit 236–967  NOTE: Replacement brushes may last only half as  C H long as the original ones. To maximize brush life, break G in new brushes by operating the sprayer for at least  F one hour


Manuais similares
# Manual do usuário Categoria Baixar
1 Graco Inc. 1095 Premium Hi-Boy Manual de instruções Pulverizador de tinta 11
2 Graco Inc. 12004 Manual de instruções Pulverizador de tinta 1
3 Graco Inc. 111418a Manual de instruções Pulverizador de tinta 1
4 Graco Inc. 12004X Manual de instruções Pulverizador de tinta 2
5 Graco Inc. 12006 Manual de instruções Pulverizador de tinta 2
6 Graco Inc. 12005 Manual de instruções Pulverizador de tinta 0
7 Graco Inc. 1095 Premium Hi Manual de instruções Pulverizador de tinta 1
8 Graco Inc. 1595 HI Manual de instruções Pulverizador de tinta 3
9 Graco Inc. 207-945 Manual de instruções Pulverizador de tinta 7
10 Graco Inc. 1595 Premium Hi Manual de instruções Pulverizador de tinta 2
11 Graco Inc. 208-748 Manual de instruções Pulverizador de tinta 0
12 Graco Inc. 208-749 Manual de instruções Pulverizador de tinta 1
13 Graco Inc. 1595 Premium Hi-Boy Manual de instruções Pulverizador de tinta 6
14 Graco Inc. 208-644 Manual de instruções Pulverizador de tinta 1
15 Graco Inc. 218-026 Manual de instruções Pulverizador de tinta 2
16 3M Series 52 Manual de instruções Pulverizador de tinta 1
17 3M Series 56 Manual de instruções Pulverizador de tinta 0
18 3M Series 56ZZ Manual de instruções Pulverizador de tinta 1
19 3M Series 55ZZ Manual de instruções Pulverizador de tinta 1
20 3M Series 57 Manual de instruções Pulverizador de tinta 1