Resumo do conteúdo contido na página número 1
HP TFT7600 G2 Rackmount Keyboard Monitor
KVM Console
User Guide
Abstract
This guide provides operational guidance for the HP TFT7600 G2 Rackmount Keyboard Monitor KVM C onsole.
Part Number: 615930-003
June 2012
Edition: 3
Resumo do conteúdo contido na página número 2
© Copyright 2010, 2012 Hewlett-Packard Development Company, L.P . The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nnog h thi erein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained h erein. Bluetooth® is a trademark owned by its proprietor and use
Resumo do conteúdo contido na página número 3
Contents Introduction .................................................................................................................................. 5 Main components ...................................................................................................................................... 5 Rear components ....................................................................................................................................... 6 ENERGY STAR complian t..........
Resumo do conteúdo contido na página número 4
China energy regulation s......................................................................................................................... 25 Disposal of waste equipment by users in private households in the European U ......................................... nion 25 Power cord requiremen ........................................................................................................................... t 25 Power cord statement for Japa .....................................
Resumo do conteúdo contido na página número 5
Introduction Main components Callout Component Function Display release latch Pushes down to unlatch the display assem bly 1 Blue LED 2 • Turns on when the display is closed • Helps identify the HP TFT7600 KVM Console in a rac k OSD activation button 3 • Launches OSD menus • Selects • Exits menus and OSD OSD scroll up and Used to scroll in the OSD menu and adjust 4 down button functions Scroll lock LED Lights when Scroll lock is on 5 Cap lock LED Lights when Cap lock
Resumo do conteúdo contido na página número 6
Rear components Callout Component USB pass-through 1 USB keyboard and mouse po rt 2 PS2 keyboard por t 3 PS2 mouse por t 4 VGA input port 5 Power connection port 6 Serial firmware port 7 ENERGY STAR complian t The HP TFT7600 KVM Console is ENERGY STAR® qualif ied. For more information about the ENERGY STAR® qualifications, see the HP w ebsite (http://www.hp.com/hpinfo/globalcitizenship/environment/products/ecolabels.html). Introduction 6
Resumo do conteúdo contido na página número 7
Installation Kit contents Item Quantity 1 HP TFT7600 KVM Consol e 4 M6 screws 5 6-32 screws 2 HP Adjustable Toolless Rails 1 Cable management arm, power adapter with brace r ail 2 Lock plates 2 USB cables 2 PS2 cables 1 Video cable 2 Power cords 2 USB cable label s This kit might contain extra hardwar e. Installing the HP TFT7600 G2 Rackmount Keyboard Monitor KVM Console 1. Align the HP 1U Adjustable Toolless Rails with the holes marked on the rack, and snap th
Resumo do conteúdo contido na página número 8
2. Extend the inner slides until they lock into pl ace. 3. Align the unit with the extended inner slides, and then insert the unit into the rack. Installation 8
Resumo do conteúdo contido na página número 9
4. From the rear of the rack, slide the brace rail assembly in between the HP 1U Adjustable Tooll ess Rails. 5. Align the screw holes on the brace rail with the screw holes on the HP 1U Adjustable Toolle ss Rails. 6. Using two 6-32 screws, secure the brace rail to the HP 1U Adjustable Toolless Rails. Installation 9
Resumo do conteúdo contido na página número 10
7. Remove and discard the two shipping screws from the rear of the unit. 8. Attach the cable management arm to the rear of the unit with tw -32o sc 6rews. Installation 10
Resumo do conteúdo contido na página número 11
9. Connect and route the cables through the cable management arm and unit openi ng. Installation is complete . Connecting and routing cable s When connecting and routing the cables through the cable management arm and cable tray to the HP TFT7600 KVM Console, use the following ca-broleuting method to ensure that the cables fit into the t ray. IMPORTANT: Use either the PS/2 cables or USB keyboard/mouse cable when connecting the unit to a device. Do not use b oth. NOTE: The P
Resumo do conteúdo contido na página número 12
The following figure illustrates where the cables connect and how to route the cables in t he tray. Item Description Power cable 1 VGA cable 2 USB keyboard/mouse cable 3 USB passth - rough cable 4 Accessing the HP TFT7600 KVM Console 1. Gently extend the HP TFT7600 KVM Console until the slides l ock. 2. Push the display release latch, and then lift the disp lay. Installation 12
Resumo do conteúdo contido na página número 13
Removing the HP 1U Adjustable Toolless Rails 1. Locate the spring release. 2. Place your hand on the outside of the HP 1U Adjustable Toolless Rails so that you can move the spring release. 3. Gently move the spring release toward the inside of the rack (1) while moving the HP 1U Adjustable Toolless Rails out toward you and away from the rack (2). NOTE: If you cannot gain access to the spring release from the outside of the HP 1U Adjustable Toolless Rails, a tool might be required t
Resumo do conteúdo contido na página número 14
2. Slide it back to release the locking mechanism and gently pull to remove the cable. Enabling the native display resolution of 1440x900 in HP-UX To fix issues related to wide screen panels, verify that you have at least one of the following server patches (or newer) installed : • PHSS_40809 (11.31) • PHSS_40810 (11.23) For more information about settgin resolutions in H-U PX, see the Graphics Administration Guide for H-UX P 11.x servers on the HP website (http://docs.hp.com/en/590
Resumo do conteúdo contido na página número 15
Operational overview On-screen display The OSD buttons are used to operate the HP TFT7600 KVM Console OSD m enus. Callout Component Function OSD activation button 1 • Launches OSD menus • Selects menu options • Exits menus and OSD OSD scroll up and down butt on Used to scroll in the OSD menu and 2 adjust the function Launching OSD menu To launch the OSD menu: 1. Press the OSD activation button on the front panel. The main menu displays on the s creen. 2. To select a men
Resumo do conteúdo contido na página número 16
• Use the OSD activation button to select a s -muebnu or a function. Example: To exit the OSD menu : 1. Press the Down ( - ) button to scroll to the Exit functi on. 2. Press the OSD activatio nbutton to select the Exit function and exit the OSD m enu. OSD menu The OSD menu provides access to display settings and functions, enabling the user to customize the HP TFT7600 KVM Console display settings . Brightness/Contrast The Brightness/Contrast option contains the following option s: • B
Resumo do conteúdo contido na página número 17
Vertical position The V position option displays a slider bar to enable the adjustment of the screen's vertical position. The center of the bar is obtained from the fa-cpto rersyet value for Vertical Position . Clock The Clock option displays a slider bar to enable the adjustment of the Horizontal Cl ocks. Phase The Phase option displays a slider bar to enable the adjustment of the analog signals phase. Advanced The Advanced option provides access to the following option s: • OSD s
Resumo do conteúdo contido na página número 18
Auto Configuration The Auto Configuration option performs four functions automatica lly: • Auto Level—Automatically adjusts the black and white levels of the s creen • Auto Position—Automatically adjusts the position of the scre en • Auto Phase—Automatically adjusts the phas e • Auto Clock—Automatically adjusts the output clock per line to match the i nput Factory settings The Factory settings option enables the user to set the HP TFT7600 back to its original factory settings. The followi
Resumo do conteúdo contido na página número 19
Maintenance Maintenance guidelines To protect your unit from overheating and other types of damag e: • Use only a power source and connection appropriate for this unit, as indicated on the marking label and back plate . • If an extension cord or power strip is used, be sure that the cord or strip is rated for the product. Also, be sure that the total ampere ratings of all products plugged into the extension cord or power strip do not exceed 80% of the extension cord or power strip ampere
Resumo do conteúdo contido na página número 20
Shipping instructions Keep the original packing box in a storage area in case you must move or ship your HP TFT7600 KVM Console. Moving a rack with the HP TFT7600 KVM Console installed When moving the HP TFT7600 KVM Console installed in a rack, HP om r meecnds that you install the lock plates, included in your kit, on each side of the unit and rack. To install lock plate s: 1. Place the lock plate into the slot and rotate it b ack. 2. Insert one M6 screw into the hole on the lock plat
