Streszczenie treści zawartej na stronie nr. 1
HP TFT7600 G2 Rackmount Keyboard Monitor
KVM Console
User Guide
Abstract
This guide provides operational guidance for the HP TFT7600 G2 Rackmount Keyboard Monitor KVM C onsole.
Part Number: 615930-003
June 2012
Edition: 3
Streszczenie treści zawartej na stronie nr. 2
© Copyright 2010, 2012 Hewlett-Packard Development Company, L.P . The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nnog h thi erein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained h erein. Bluetooth® is a trademark owned by its proprietor and use
Streszczenie treści zawartej na stronie nr. 3
Contents Introduction .................................................................................................................................. 5 Main components ...................................................................................................................................... 5 Rear components ....................................................................................................................................... 6 ENERGY STAR complian t..........
Streszczenie treści zawartej na stronie nr. 4
China energy regulation s......................................................................................................................... 25 Disposal of waste equipment by users in private households in the European U ......................................... nion 25 Power cord requiremen ........................................................................................................................... t 25 Power cord statement for Japa .....................................
Streszczenie treści zawartej na stronie nr. 5
Introduction Main components Callout Component Function Display release latch Pushes down to unlatch the display assem bly 1 Blue LED 2 • Turns on when the display is closed • Helps identify the HP TFT7600 KVM Console in a rac k OSD activation button 3 • Launches OSD menus • Selects • Exits menus and OSD OSD scroll up and Used to scroll in the OSD menu and adjust 4 down button functions Scroll lock LED Lights when Scroll lock is on 5 Cap lock LED Lights when Cap lock
Streszczenie treści zawartej na stronie nr. 6
Rear components Callout Component USB pass-through 1 USB keyboard and mouse po rt 2 PS2 keyboard por t 3 PS2 mouse por t 4 VGA input port 5 Power connection port 6 Serial firmware port 7 ENERGY STAR complian t The HP TFT7600 KVM Console is ENERGY STAR® qualif ied. For more information about the ENERGY STAR® qualifications, see the HP w ebsite (http://www.hp.com/hpinfo/globalcitizenship/environment/products/ecolabels.html). Introduction 6
Streszczenie treści zawartej na stronie nr. 7
Installation Kit contents Item Quantity 1 HP TFT7600 KVM Consol e 4 M6 screws 5 6-32 screws 2 HP Adjustable Toolless Rails 1 Cable management arm, power adapter with brace r ail 2 Lock plates 2 USB cables 2 PS2 cables 1 Video cable 2 Power cords 2 USB cable label s This kit might contain extra hardwar e. Installing the HP TFT7600 G2 Rackmount Keyboard Monitor KVM Console 1. Align the HP 1U Adjustable Toolless Rails with the holes marked on the rack, and snap th
Streszczenie treści zawartej na stronie nr. 8
2. Extend the inner slides until they lock into pl ace. 3. Align the unit with the extended inner slides, and then insert the unit into the rack. Installation 8
Streszczenie treści zawartej na stronie nr. 9
4. From the rear of the rack, slide the brace rail assembly in between the HP 1U Adjustable Tooll ess Rails. 5. Align the screw holes on the brace rail with the screw holes on the HP 1U Adjustable Toolle ss Rails. 6. Using two 6-32 screws, secure the brace rail to the HP 1U Adjustable Toolless Rails. Installation 9
Streszczenie treści zawartej na stronie nr. 10
7. Remove and discard the two shipping screws from the rear of the unit. 8. Attach the cable management arm to the rear of the unit with tw -32o sc 6rews. Installation 10
Streszczenie treści zawartej na stronie nr. 11
9. Connect and route the cables through the cable management arm and unit openi ng. Installation is complete . Connecting and routing cable s When connecting and routing the cables through the cable management arm and cable tray to the HP TFT7600 KVM Console, use the following ca-broleuting method to ensure that the cables fit into the t ray. IMPORTANT: Use either the PS/2 cables or USB keyboard/mouse cable when connecting the unit to a device. Do not use b oth. NOTE: The P
Streszczenie treści zawartej na stronie nr. 12
The following figure illustrates where the cables connect and how to route the cables in t he tray. Item Description Power cable 1 VGA cable 2 USB keyboard/mouse cable 3 USB passth - rough cable 4 Accessing the HP TFT7600 KVM Console 1. Gently extend the HP TFT7600 KVM Console until the slides l ock. 2. Push the display release latch, and then lift the disp lay. Installation 12
Streszczenie treści zawartej na stronie nr. 13
Removing the HP 1U Adjustable Toolless Rails 1. Locate the spring release. 2. Place your hand on the outside of the HP 1U Adjustable Toolless Rails so that you can move the spring release. 3. Gently move the spring release toward the inside of the rack (1) while moving the HP 1U Adjustable Toolless Rails out toward you and away from the rack (2). NOTE: If you cannot gain access to the spring release from the outside of the HP 1U Adjustable Toolless Rails, a tool might be required t
Streszczenie treści zawartej na stronie nr. 14
2. Slide it back to release the locking mechanism and gently pull to remove the cable. Enabling the native display resolution of 1440x900 in HP-UX To fix issues related to wide screen panels, verify that you have at least one of the following server patches (or newer) installed : • PHSS_40809 (11.31) • PHSS_40810 (11.23) For more information about settgin resolutions in H-U PX, see the Graphics Administration Guide for H-UX P 11.x servers on the HP website (http://docs.hp.com/en/590
Streszczenie treści zawartej na stronie nr. 15
Operational overview On-screen display The OSD buttons are used to operate the HP TFT7600 KVM Console OSD m enus. Callout Component Function OSD activation button 1 • Launches OSD menus • Selects menu options • Exits menus and OSD OSD scroll up and down butt on Used to scroll in the OSD menu and 2 adjust the function Launching OSD menu To launch the OSD menu: 1. Press the OSD activation button on the front panel. The main menu displays on the s creen. 2. To select a men
Streszczenie treści zawartej na stronie nr. 16
• Use the OSD activation button to select a s -muebnu or a function. Example: To exit the OSD menu : 1. Press the Down ( - ) button to scroll to the Exit functi on. 2. Press the OSD activatio nbutton to select the Exit function and exit the OSD m enu. OSD menu The OSD menu provides access to display settings and functions, enabling the user to customize the HP TFT7600 KVM Console display settings . Brightness/Contrast The Brightness/Contrast option contains the following option s: • B
Streszczenie treści zawartej na stronie nr. 17
Vertical position The V position option displays a slider bar to enable the adjustment of the screen's vertical position. The center of the bar is obtained from the fa-cpto rersyet value for Vertical Position . Clock The Clock option displays a slider bar to enable the adjustment of the Horizontal Cl ocks. Phase The Phase option displays a slider bar to enable the adjustment of the analog signals phase. Advanced The Advanced option provides access to the following option s: • OSD s
Streszczenie treści zawartej na stronie nr. 18
Auto Configuration The Auto Configuration option performs four functions automatica lly: • Auto Level—Automatically adjusts the black and white levels of the s creen • Auto Position—Automatically adjusts the position of the scre en • Auto Phase—Automatically adjusts the phas e • Auto Clock—Automatically adjusts the output clock per line to match the i nput Factory settings The Factory settings option enables the user to set the HP TFT7600 back to its original factory settings. The followi
Streszczenie treści zawartej na stronie nr. 19
Maintenance Maintenance guidelines To protect your unit from overheating and other types of damag e: • Use only a power source and connection appropriate for this unit, as indicated on the marking label and back plate . • If an extension cord or power strip is used, be sure that the cord or strip is rated for the product. Also, be sure that the total ampere ratings of all products plugged into the extension cord or power strip do not exceed 80% of the extension cord or power strip ampere
Streszczenie treści zawartej na stronie nr. 20
Shipping instructions Keep the original packing box in a storage area in case you must move or ship your HP TFT7600 KVM Console. Moving a rack with the HP TFT7600 KVM Console installed When moving the HP TFT7600 KVM Console installed in a rack, HP om r meecnds that you install the lock plates, included in your kit, on each side of the unit and rack. To install lock plate s: 1. Place the lock plate into the slot and rotate it b ack. 2. Insert one M6 screw into the hole on the lock plat
