Краткое содержание страницы № 1
3-232-389-12 (1)
Cordless
Telephone
with Answering System
US
Operating Instructions
Hearing-Aid Compatible
SPP-A2770
©2001 Sony Corporation
Краткое содержание страницы № 2
Caution IMPORTANT You are cautioned that any changes or modifications not expressly approved in this SAFETY manual could void your authority to operate this equipment. INSTRUCTIONS Privacy of communications may not be ensured when using this phone. When using your telephone equipment, basic safety precautions Note should always be followed to reduce the risk of fire, electric shock and This equipment has been tested and found to comply with the limits for a Class B digital injury to persons, inc
Краткое содержание страницы № 3
6. The telephone company may make INFORMATION FOR FCC changes to it’s facilities, equipment, REGURATION CLAIM operations or procedures that could affect the operation of the equipment. 1. This equipment complies with Part 15 and Part 68 of the FCC rules for the If this happens the telephone company will provide advance notice United States. On the bottom of this equipment is a label that contains, so you can make the necessary modifications to maintain among other information, the FCC certific
Краткое содержание страницы № 4
Precaución IMPORTANTES Se le advierte que cualquier cambio o modificación no aprobado expresamente en el INSTRUCCIONES presente manual podría anular su autorización para operar este equipo. DE SEGURIDAD El secreto de las comunicaciones puede no asegurarse cuando utilice este teléfono. A fin de reducir el riesgo de incendio, descarga eléctrica y Nota lesiones a las personas cuando usted Este equipo se ha sometido a pruebas y se ha determinado que cumple los límites para un use su equipo telefónic
Краткое содержание страницы № 5
6. La compañía telefónica puede realizar INFORMACIÓN PARA LA cambios en sus instalaciones, equipos, DEMANDA DE LA operaciones, o procedimientos que REGLAMENTACIÓN DE LA FCC pueden afectar la operación del equipo. Cuando suceda esto, la 1. Este equipo cumple con la Parte 15 y compañía telefónica le avisará con la Parte 68 de las reglas de la FCC antelación para que pueda realizar las para EE.UU. En la base de este modificaciones necesarias a fin de equipo hay una etiqueta que contiene, mantener
Краткое содержание страницы № 6
Table of contents Getting Started 46 Transferring the Phone Directory memory 8 Welcome 48 Locating the handset 9 Read this first 49 Switching the phones during a 10 Step 1: Checking the package call contents 11 Step 2: Setting up the base unit Intercom Operation 14 Step 3: Preparing the battery pack 50 Talking between the phones – Intercom – Walkie-Talkie 16 Step 4: Choosing the dialing function mode 51 Transferring a call 17 Step 5: Entering the area code 21 Step 6: Setting the day and time
Краткое содержание страницы № 7
65 Recording a memo Additional Information 66 Operating from an outside 78 Carrying the cordless handset by phone the belt clip 66 Setting the remote ID code 79 Notes on power sources (security code) 80 Maintenance 67 Picking up new messages 81 Troubleshooting 85 Specifications Caller ID Features 86 Index 68 Understanding the Caller ID service Back cover LIMITED WARRANTY 68 When you receive a call 69 Looking at the Caller ID list 69 Viewing the Caller ID list 70 Erasing data from the Caller ID l
Краткое содержание страницы № 8
Getting Started Welcome Thank you for purchasing Sony QuadraStation 2.4! The phone systems can be expanded to a total of four cordless handsets and realizes the Intercom conversation between a couple of cordless handsets (walkie-talkie function). First, read the followings. • The system includes a cordless handset. If you utilize the walkie- talkie feature, it is necessary to purchase the SPP-H273 Sony cordless handset used for the QuadraStation 2.4 exclusively. • Be sure to register the additio
Краткое содержание страницы № 9
Getting Started Read this first Before you use your phone, you must first set it up. Here’s a quick way to set up your phone: Steps 1 to 6. Step 1 (page 10) First, unpack the phone and the supplied accessories. Step 2 (pages 11 to 13) You need to do two things to set up the base unit, including finding the best location for the base unit. Step 3 (pages 14 to 15) Insert the battery pack into the cordless handset and charge it for more than 12 Base unit hours. Step 4 (page 16) Choose an appr
Краткое содержание страницы № 10
Step 1 Checking the package contents Make sure you have received the following items in the package. If anything is missing, contact your local Sony dealer. AC power adaptor (AC-T133) Base unit Cordless handset Telephone Rechargeable line cord battery pack (BP-T38) US Getting Started 10
Краткое содержание страницы № 11
Getting Started Step 2 Setting up the base unit Do the following steps: • Choose the best location • Connect the base unit Choose the best location Where you place the base unit affects the reception quality of the cordless handset. Away from noise sources such as a window by a street with heavy traffic Away from television sets and other Away from heat sources, such as radiators, electronic equipment airducts, and sunlight Away from a microwave oven Away from excessive moisture, extremely low
Краткое содержание страницы № 12
Step 2: Setting up the base unit (continued) Connect the base unit 3 Hook the cord. To an AC outlet 2 To DC IN 9V To LINE AC power adaptor (supplied AC-T133) Telephone line cord (supplied) 1 To a telephone outlet 1 Connect the telephone line cord to the LINE jack and to a telephone outlet. 2 Connect the AC power adaptor to the DC IN 9V jack and to an AC outlet. “PF” flashes on the message counter*. 3 Raise the antenna. Make sure it points towards the ceiling. * “PF” flashes on the message counte
Краткое содержание страницы № 13
Getting Started Notes • Use only the supplied AC-T133 AC power adaptor. Polarity of the plug Do not use any other AC power adaptor. • Connect the AC power adaptor to a continuous power supply. • Place the base unit close to the AC outlet so that you can unplug the AC power adaptor easily. Tip Modular If your telephone outlet is not modular, contact your telephone service company for assistance. US Getting Started 13 + –
Краткое содержание страницы № 14
Step 3 Preparing the battery pack Charge the battery pack for more than 12 hours before you start using your cordless handset. 1 Slide open the battery compartment lid of the cordless handset. BP-T38 2 Connect the battery connector with correct polarity (black wire Red goes on lower side and red wire goes on upper side). Black Hook 3 Hook the cords and insert the battery pack. Then close the lid. 4 Place the cordless handset on the base unit. The CHARGE lamp on the base unit lights up and “HANDS
Краткое содержание страницы № 15
Getting Started About the station number When you start charging the battery, “HANDSET 1” HANDSET 1 appears on the display of the cordless handset. This shows the ID number for each cordless handset and base unit of the system, called “station number.” The station NEW OLD MASSAGE RING OFF number of the base unit is set to 0 and that of the cordless handset (supplied with the base unit) is set to 1 at the factory. The station number of the cordless handset newly added to the system will be one of
Краткое содержание страницы № 16
Step 4 Choosing the dialing mode For the telephone to work properly, select an appropriate dialing mode (tone or pulse). Setting the dialing mode is only possible on the cordless handset. Make sure the base unit* is not in use before you start the setting. You cannot set the dialing mode while the system is in use. * If the system includes additional cordless handsets, it is necessary to stop using them before you start the setting as well. 1 Press (PGM). 2 Press (*TONE). You hear a confirmation
Краткое содержание страницы № 17
Getting Started Step 5 Entering the area code When you use this phone for the first time, or move to an area that has a different area code, you must enter the area code. Otherwise, you cannot use some functions of this phone and the Caller ID functions. This is also necessary because the phone must be able to select an area code to properly dial a call from the Caller ID list. Depending on your region, enter the 3-digit area code as follows: Case 1. If 7-digit dialing (no area code) is accepted
Краткое содержание страницы № 18
Step 5: Entering the area code (continued) 4 Enter the three digits of your home area code using the dialing keys. 5 Press (PGM). You hear a long confirmation beep. Notes • If the home area code is already entered, it appears on the display in step 2. To enter a different home area code, see “To change the home area code” below. • Do not allow more than 60 seconds to elapse during the operation procedure. • If the area code has not been entered, calling back from the Caller ID list and storing t
Краткое содержание страницы № 19
Getting Started To enter the local area code (For 10 digits phone numbers users) If a call matches one of the local area codes you entered, the phone number will be registered with 10 digits in the Caller ID list (area code + number). If a call does not match one of the local area codes you entered, the phone number will be registered with 11 digits in the Caller ID list (1 + area code + number). Some regions of the country allow you to have more than one local area code. (Up to five local area
Краткое содержание страницы № 20
Step 5: Entering the area code (continued) To change the local area code 1 Perform steps 1 to 3 on page 19. The current local area code appears on the display. 2 Press (ERASE) to erase the current local area code. 3 Enter a new local area code using the dialing keys. 4 Press (PGM). You hear a long confirmation beep. To erase the local area code You can erase the local area code. Perform steps 1 and 2 avobe, then press (PGM). The local area code will be erased, and you hear a long confirmation be
