Краткое содержание страницы № 1
User’s manual
TL7600
DECT 6.0
accessory cordless headset
Краткое содержание страницы № 2
Congratulations on your purchase of this AT&T product. Before using this AT&T product, please read Important safety information on pages 35-38 of this manual. Please thoroughly read the user’s manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. Model number: TL7600 (Headset and headset charger) Typ
Краткое содержание страницы № 3
Parts checklist Check to make sure the headset package includes the following items. Save your sales receipt and original packaging in the event warranty service is necessary. User’s manual TL7600 DECT 6.0 accessory cordless headset User's manual Cordless headset Over the ear hook Headset charger Battery compartment cover Battery for headset Charger power adapter Behind the neck band Over the head band
Краткое содержание страницы № 4
User’s manual TL7600 DECT 6.0 accessory cordless headset Table of contents Ending a call on Getting started the headset ............................ 20 Quick reference guide - Auto off .................................... 20 headset ............................................1 Temporary ring tone Headset lights ..........................1 silencing ................................... 21 Headset alert tones ..............3 Intercom calls and Quick reference guide - transfers ...........
Краткое содержание страницы № 5
Especially about cordless headsets .................................. 36 Precautions for users of implanted cardiac pacemakers ............................ 38 Pacemaker patients ........... 38 Maintenance............................... 39 FCC Part 68 and ACTA.......... 40 FCC Part 15 ................................ 43 Limited warranty ...................... 45 Technical specifications ....... 49 DECT 6.0 digital technology .............................. 49 Operating range .................
Краткое содержание страницы № 6
Getting started Quick reference guide - headset ON/OFF Press to make, answer, or end a call. Headset lights ON/OFF light status On • Headset is charging in the headset charger. • Headset is trying to register to the headset base or telephone base. • Headset is searching for the headset base. Flash • Flashes slowly when incorrect battery is installed. • Flashes three times, followed by a pause. This cycle then repeats three more times and then shuts down to indicate the battery level is very l
Краткое содержание страницы № 7
Getting started Quick reference guide - headset VOLUME /+ – Press the volume keys on the side of the headset to adjust the listening volume when on a call (page 22). MUTE/FLASH Press to mute the microphone during a call (page 24). Press and hold to receive call waiting during a call (page 22). EARPIECE Press to mute the ring tone in the earpiece when there is an incoming call (page 21). Battery compartment cover Remove to install or replace the battery (page 7). Microphone 2
Краткое содержание страницы № 8
Getting started Quick reference guide - headset Headset alert tones Three quick beeps. • A VOLUME /+ – key is pressed when the volume is already at its highest or lowest setting. • The headset is not registered and the headset ON/OFF button is pressed. • The headset has gone out of range from the headset base during a call. One short beep • Low battery warning. every 20 seconds. One short beep • The call is muted. every 15 seconds. One long beep • Call waiting alert tone. repeated. One short
Краткое содержание страницы № 9
Getting started Quick reference guide - headset charger Charging cradle Place the headset here for charging. Power cord groove Place the power cord here. Power jack Plug the small end of the charger power adapter here. 4
Краткое содержание страницы № 10
Getting started Installation preparation You must install and See pages 6-8 charge the battery before for easy instructions. STOP! using the headset. If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your telephone lines, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information abo
Краткое содержание страницы № 11
Getting started Charger installation 1. Plug the small end of the 2. Plug the charger power charger power adapter into adapter into a power the power jack at the bottom outlet not controlled by a of the headset charger. Place wall switch. the power cord in the power cord slot. IMPORTANT INFORMATION 1. Use only the power adapter supplied with this product. To order a replacement power adapter, visit our website at www.telephones.att.com, or call 1 (800) 222-3111. In Canada, dial 1 (866) 28
Краткое содержание страницы № 12
Getting started Battery installation Install the battery as shown below. For optimal performance, charge the headset battery for at least six hours before use. When fully charged, the headset battery provides approximately 10 hours of talk time or 5 days of standby time. When the headset is not in use, recharge by returning it to the headset base. 1 1. If the battery c co om mp pa ar rt tm me en nt t c co ov ve er r is attached, press on both sides of the battery compartment cover and lift
Краткое содержание страницы № 13
Getting started Battery charging After installing the battery, charge the headset by placing it on the headset charger as shown below. Before registration, the headset ON/OFF light flashes twice every five seconds whether the headset is charging or not. After registration, the headset ON/OFF light is on when the headset is charging. Push ON/OFF light Insert 1. Insert the headset into 2. Push the headset downward the charging cradle. until the ON/OFF light on the headset turns on. IMPORT
Краткое содержание страницы № 14
Getting started Registering the headset You must register your new TL7600 headset with one of the following models before use: • AT&T DECT cordless headset TL7610/TL7611/TL7612 (see page 10). You can register a maximum of two headsets to each headset base. -OR- • A compatible AT&T DECT cordless telephone (see page 11). You can register a maximum of two headsets to each cordless telephone. The telephone base recognizes and counts a headset the same as a handset. Refer to your telephon
Краткое содержание страницы № 15
Getting started Registering the headset To register a headset to a TL7610/TL7611/TL7612 DECT headset base 1. Make sure the battery is properly installed in the headset (see page 7). The ON/OFF light flashes twice every five seconds to indicate the headset is not registered. 2. Place the headset in the headset base or charger and allow it to charge for at least five minutes before beginning registration. 3. Remove the headset from the headset base or charger. 4. On the headset base, press
Краткое содержание страницы № 16
Getting started Registering the headset To register the headset to an AT&T DECT cordless telephone base 1. Make sure the battery is properly installed in the headset (see page 7). The ON/OFF light flashes twice every five seconds to indicate the headset is not registered. 2. Place the headset in the headset charger and allow it to charge for at least five minutes before beginning registration. Remove the headset from the charger and then place the headset back into the charger. 3. On the
Краткое содержание страницы № 17
Getting started Headset attachments Over the ear hook To attach the ear hook to the headset: 1. Remove any headset attachment connected to the headset. 2. Insert the earpiece into the ear hook, as shown in Figure 1. 3. Press the ear hook onto the earpiece, as shown in Figure 2. 4. Hook the headset onto the desired ear. Adjust the angle of the headset until the microphone is pointing towards your mouth, as shown in Figure 3. Figure 1 Figure 2 Figure 3 NOTE: Firmly grip the earpiece with one han
Краткое содержание страницы № 18
Getting started Headset attachments To adjust the headset to wear on the other ear: 1. Hold the headset in your hand. Lift the hook upward, as shown in Figure 4. 2. Rotate the hook 180˚ in a counterclockwise direction, as shown in Figure 5. 3. Push the hook downward, as shown in Figure 6. 4. Hook the headset onto the desired ear. Adjust the angle of the headset until the microphone is pointing towards your mouth, as shown in Figure 7. 180˚ Figure 5 Figure 4 Figure 7 Figure 6 13
Краткое содержание страницы № 19
Getting started Headset attachments To remove the ear hook from the headset: Hold the headset with one hand and the ear hook with the other hand. Lift the ear hook up until it separates from the earpiece. 14
Краткое содержание страницы № 20
Getting started Headset attachments Over the head band To attach the headset to the headband for wearing on the left or right ear: 1. Remove any headset attachment currently connected to the headset. 2. Insert the earpiece into the loop of the ear pad, as shown in Figure 8. 3. Gently press the earpiece inward until it clicks into place, as shown in Figure 9. 4. Adjust the headband to fit your head. Adjust and rotate the angle of the headset until the microphone is pointing towards your mo
