Краткое содержание страницы № 1
User’s manual
SynJ SB67148
DECT 6.0 4-line expansion deskset
for use with AT&T model
SynJ SB67118/SB67138
Краткое содержание страницы № 2
Congratulations on your purchase of this AT&T product. Before using this AT&T product, please read the Important safety information on pages 76-77 of this manual. Please thoroughly read this user’s manual for all the feature operations and troubleshooting information necessary to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or call 1 (888) 915-2007. In Canada, dial 1 (866) 288-4268. TM Model number: SynJ SB67148 Type: DECT 6.0 expansion
Краткое содержание страницы № 3
Parts checklist Check to make sure the telephone package includes the following items: Quick start guide User’s manual SynJ SB67148 SynJ SB67148 DECT 6.0 4-line DECT 6.0 4-line expansion deskset expansion deskset for use with AT&T model for use with AT&T model SynJ SB67118/SB67138 SynJ SB67118/SB67138 User's manual Quick start guide Deskset Handset with coiled Backup battery cord installed Deskset power adapter Additional directory card
Краткое содержание страницы № 4
User’s manual SynJ SB67148 DECT 6.0 4-line expansion deskset for use with AT&T model SynJ SB67118/SB67138 Table of contents Getting started Deskset operation Quick reference guide ..............................1 Deskset basic operation ........................19 Installation ......................................................4 Line indicators .........................................19 Deskset installation ....................................5 Make a call.................................
Краткое содержание страницы № 5
PTT to all devices ..................................36 Answering system and voicemail ......50 Answer a PTT call ..................................37 Set the answering system to Convert a PTT call to an answer automatically ..........................51 intercom call ............................................37 Answering system capacity ..............51 End a PTT call ........................................37 Voice prompts .........................................51 Deskset mailbox setup
Краткое содержание страницы № 6
Getting started Quick reference guide HOLD LINE 1-LINE 4 keys EXIT Press to place an Press to make or answer While in a menu, press to outside call on a call on the desired line cancel an operation and exit hold (page 27). (pages 19-21). the menu display. NEW CALL indicator On when there are new or missed calls (page 46). DIR Press to view directory information (page 41). CID Press to view caller ID information (page 46). /SKIP During message playback, press to skip to the next messag
Краткое содержание страницы № 7
Getting started Quick reference guide FLASH PTT During a call, press to Press to initiate a PTT call (page 35). answer an incoming call Press and hold to broadcast to all extensions (page 36). when you receive a call waiting alert (page 24). INT When in idle mode, press to initiate an intercom call (page 31). Speed dial keys Press to review or dial a stored speed dial number when the deskset is not in use (page 21). LOWER Press to enter the lower speed dial locations (page 21). SPEAKE
Краткое содержание страницы № 8
Getting started Quick reference guide Directory card To write names on the directory card: 1. Remove the clear plastic cover by inserting the tip of a small item such as a paperclip into the hole at the top edge of the cover. 2. Pull out the directory card. 3. Write the information on the directory card. 4. Replace the directory card and the plastic cover. Main menu The > symbol highlights a menu item. L1 L2 L3 L4 Main menu 1:Deskset 1 • Directory (pages 38-43) 3 Missed calls 10:01AM 11/2
Краткое содержание страницы № 9
Getting started Installation Install the deskset close to a power outlet not controlled by a wall switch. The deskset should be placed on a flat surface. For optimum range and better reception, place the deskset near the main telephone base. Your product may be shipped with a protective sticker covering the deskset display - remove it before use. For customer service or product information, visit our website at www.telephones.att.com or call 1 (888) 915-2007. In Canada, dial 1 (866) 288-4
Краткое содержание страницы № 10
Getting started Deskset installation Install the deskset as shown below. Route the power adapter Plug the large end of cord through the slot at the the power adapter into bottom of the deskset. a power outlet not controlled by a wall switch. Plug the small end of the power adapter into the Raise the antenna for power jack at the bottom of optimum wireless range the deskset. and performance. Plug the end of the coiled handset cord into the jack at the bottom of the deskset. IMPORTANT
Краткое содержание страницы № 11
Getting started Backup battery installation Install the backup battery as shown below. In the event of a power failure, the charged backup battery allows the deskset to operate. Plug in the AC power adapter into the power jack at the bottom of the deskset to charge the backup battery. 1. Press down the tab to open the battery compartment cover. 2. Place the battery in the compartment. 3. Align the cover flat against the Make sure the supplied battery with battery compartment, then press the
Краткое содержание страницы № 12
Getting started Backup battery charging When the deskset loses power with the backup battery installed, the screen indicates the battery status (see table below) and displays Check AC power. When the backup battery is in low battery mode, the screen displays Low battery. The backup battery is fully charged after 16 hours of continuous charging. See the table on page 82 for battery operating times. The following table summarizes the battery charge indicators and actions to take. Battery i
Краткое содержание страницы № 13
Getting started Add and register a deskset The handset provided with the SynJ SB67118/SB67138 is already registered as Handset 1. Additional desksets are assigned numbers in the order they are registered (Deskset 2 to Deskset 10). You can register a maximum of 10 desksets/handsets, or 9 desksets/handsets and one cordless headset. You can add desksets (SynJ SB67148, purchased separately) to the SynJ SB67118/SB67138 at any time, but each new deskset must be registered with the main telephone
Краткое содержание страницы № 14
Getting started Add and register a deskset Register the deskset to your SynJ SB67138 telephone base 1. On the SynJ SB67138 telephone base, press MENU/ENTER. SB67138: 2. Scroll down to Registration and press MENU/ENTER. COVM 3. Press MENU/ENTER again to select Register HS. Speed dial setup The main telephone base screen shows Customer support Registration > Registering new device... 4. Press the Start softkey on the unregistered deskset. The >Register HS deskset shows Registering...Please wa
Краткое содержание страницы № 15
Getting started Deregister a deskset You may need to deregister the deskset from the main telephone base if you already have ten registered devices and need to replace a deskset, or if you wish to change the assigned number of your registered devices. You must first deregister ALL the registered devices, and then register each device that you wish to use again individually. Please read carefully through all the instructions in this section before beginning the deregistration process. Please
Краткое содержание страницы № 16
Getting started Deregister a deskset Deregister the deskset from your SynJ SB67138 telephone base 1. On the S SynJ ynJ SB67138 SB67138 t t tel el elephone ephone ephone base, pr base, base, pr press ess ess MENU/ENTER. 2. Scroll down to Registration and press MENU/ENTER. Deregister all 3. Scroll down to Deregistration and press MENU/ENTER. devices? 4. The main telephone base shows <=No >=Yes Deregister all devices? <=No >=Yes. Press REP to exit or press SKIP to continue the deregistration p
Краткое содержание страницы № 17
Getting started Add a corded headset You can use this deskset handsfree when you install any industry-standard 2.5mm corded telephone headset (purchased separately). For best results, use a 2.5mm corded headset. To purchase a headset, visit our website at www.telephones.att.com, or call 1 (888) 915-2007. In Canada, dial 1 (866) 288-4268. See pages 19-22 for instructions on using the corded headset with this deskset. Add a corded headset to the deskset Lift open the plastic cover. Plug a 2.
Краткое содержание страницы № 18
Deskset settings Deskset setup Menu settings Use the menus to change the deskset settings. L1 >Directory 1. Press the Menu softkey to enter the main menu when Call log Ringer setting the deskset is not in use. Mailbox setup Back Select 2. Press DIR or CID t to o scr scroll oll t to o the f the feat eatur ure e t to o be be changed. The > symbol indicates the selected menu item. 3. Press the Select softkey to select the menu item. 4. Press the Back softkey to cancel an operation, exit the me
Краткое содержание страницы № 19
Deskset settings Deskset setup Ringer tone Use this feature to turn the key tone on and off. The telephone base is factory set to beep with each key press. You can turn off this beep sound by turning the key tone off. L1 1. When the deskset is not in use, press the Menu softkey. Directory Call log 2. Press DIR or CID to scroll to Ringer setting. Press >Ringer setting Mailbox setup the Select softkey. Back Select 3. Press DIR or CID to scroll to Ringer tone. Press the L1 Select softkey. R
Краткое содержание страницы № 20
Deskset settings Deskset setup LCD contrast Use this feature to adjust the screen contrast to one of five levels to optimize readability in different lighting conditions. L1 Call log 1. When the deskset is not in use, press the Menu softkey. Ringer setting Mailbox setup >Deskset setup 2. Press DIR or CID to scroll to Deskset setup. Press Back Select the Select softkey. L1 3. Press the Select softkey to select LCD contrast. >LCD contrast Key tone Language 4. Press DIR or CID to adjust the
