Краткое содержание страницы № 1
®
2.4GHz CORDLESS TELEPHONE
MODEL: MSP-PH2400
BEFORE OPERATING THIS PRODUCT,
PLEASE READ THESE INSTRUCTIONS COMPLETELY.
OPERATING INSTRUCTIONS
1 12/16/01, 12:28 PM
Краткое содержание страницы № 2
IMPORTANT SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. DANGEROUS VOLTAGE: Uninsulated Dangerous Voltage, that may be of sufficient magnitude to constitute a risk of electric shock to persons is present within this product's enclosure. ATTENTION: The Owner's Manual contains important operating and maintenance instructions.
Краткое содержание страницы № 3
IMPORTANT SAFETY PRECAUTIONS (CONTINUED) 5. Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury and serious damage to the product. 6. Slots and openings in the cabinet and in the back or bottom are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, so
Краткое содержание страницы № 4
IMPORTANT SAFETY PRECAUTIONS (CONTINUED) SAVE THESE INSTRUCTIONS BATTERY PRECAUTIONS To reduce the risk of fire or injury to persons, read and follow these instructions: 1. Use only the battery pack type provided with the unit. 2. Do not dispose of the battery in a fire, the cell may explode. Check with local codes for possible special disposal instructions. 3. Do not open or mutilate the battery as released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if sw
Краткое содержание страницы № 5
IMPORTANT SAFETY PRECAUTIONS (CONTINUED) The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive REN's on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all areas, the sum of the REN's should not exceed five (5.0). To be certain of the number of devices that may be connected to the line, as determined by the total REN's, contact the telephone company to determine the maximum REN for t
Краткое содержание страницы № 6
CONTENTS Important Safety Precautions .......1 Using the Redial (DEL/RE-PA) Button.............................................24 Contents..........................................5 Out of Range Warning ...................26 MSG Waiting (Voice Mail Location of Controls .....................6 Messages)......................................26 Using the Base Page Button .........26 Installation Instructions.................7 Using the Flash Button...................26 Installation of the Rechargeab
Краткое содержание страницы № 7
LOCATION OF CONTROLS HANDSET HANDSET: 1. Display 2. TALK Button 3. OPTION/SCAN Button 4. Down Button/Volume Down 5. Key Buttons (0-9,*,#) 1 6. MENU/MUTE Button 7. MEMO/SAVE Button 8 8. MSG/NEW CALL Indicator 2 9. Up Button/Volume Up 3 9 10. CALL Button 11. Headset Jack (Side of Unit) 4 12. DEL/RE-PA (Delete/Redial/ 10 5 Pause) Button 13. EDIT/FLASH Button 11 6 12 BASE: 13 14. PAGE Button 7 15. CHARGE Indicator 16. IN USE Indicator 17. DC Input (Rear of Unit) 18. Telephone Line Jack (Rear of Unit
Краткое содержание страницы № 8
INSTALLATION INSTRUCTIONS 1. Carefully unpack and remove your unit from the box. 2. Make sure all the items have been included: Base Unit AC Adapter Handset Unit Telephone Cord Rechargeable Ni-Cd Battery Pack Belt Clip 3. Make sure the Rechargeable Battery is installed or install the Rechargeable Battery as described on the next page. PLEASE REFER TO THE FOLLOWING DIAGRAM FOR STEPS 4 THROUGH 7: 4. Slide the T/P switch on the bottom of the Base unit to TONE or PULSE to match the service provided
Краткое содержание страницы № 9
INSTALLATION INSTRUCTIONS (CONTINUED) Installation of the Rechargeable Battery Remove the battery cover located on If replacing an old battery pack, the rear of the handset by sliding it unplug the battery connector and downward. remove it from the battery compartment. Plug the new battery into the Put the battery cover back on by rechargeable battery plug and sliding it upward until it clicks in insert the rechargeable battery into place. the battery compartment. Charging the Rechargeable Batte
Краткое содержание страницы № 10
SET-UP INSTRUCTIONS SETTING THE RINGER This will enable you to turn the ringer On or Off. 1 2 While in the Standby mode, press and Press the Key button 1 , or the hold the MENU/MUTE button. Up/Down buttons to select the Ringer setting. 3 4 Press the EDIT/FLASH button . Press the MEMO/SAVE button when Press the Up/Down buttons to turn done; a confirmation tone will be this option On or Off. heard. CONNECTING THE HEADSET 5 For hands-free conversation, a headset (Not Included) can be co
Краткое содержание страницы № 11
SET-UP INSTRUCTIONS (CONTINUED) SETTING THE LANGUAGE Set the language (ENGLISH, SPANISH, FRENCH) as follows: 1 2 While in the Standby mode, press and Press the Key button 2 , or the hold the MENU/MUTE button. Up/Down buttons to select the Language setting. 3 4 Press the EDIT/FLASH button . Press the MEMO/SAVE button when Press the Up/Down buttons to done; a confirmation tone will be select the desired language heard. (ENGLISH, SPANISH, FRENCH). 5 Press the MENU/MUTE button to exit th
Краткое содержание страницы № 12
SET-UP INSTRUCTIONS (CONTINUED) SETTING THE FIRST RING MODE You can set to turn Off the first ring of the telephone until the caller ID informa- tion has been displayed. 1 2 While in the Standby mode, press Press the Key button 3 , or the and hold the MENU/MUTE button. Up/Down buttons to select the First Ring mode setting. 3 4 Press the EDIT/FLASH button . Press the MEMO/SAVE button when Press the Up/Down buttons to turn done; a confirmation tone will be this option On or Off. heard.
Краткое содержание страницы № 13
SET-UP INSTRUCTIONS (CONTINUED) SETTING THE TIME It is necessary to set the internal clock time of the phone to display the time in the Caller ID display when incoming calls are received. If you subscribe to Caller ID, the time and date are automatically set when the first call is received. If the time is not automatically set, follow the steps below: 1 2 While in the Standby mode, press Press the Key button 4 , or the and hold the MENU/MUTE button. Up/Down buttons to select the Time Set s
Краткое содержание страницы № 14
SET-UP INSTRUCTIONS (CONTINUED) SETTING THE AREA CODE Set the phone to your local area code as described below. If you live in a town with more than one area code, do not enter an area code for this option. 1 2 While in the Standby mode, press Press the Key button 5 , or the and hold the MENU/MUTE button. Up/Down buttons to select the Area Code setting. 3 4 Press the EDIT/FLASH button . Press the MEMO/SAVE button when Press the Key buttons to enter the done; a confirmation tone will
Краткое содержание страницы № 15
SET-UP INSTRUCTIONS (CONTINUED) SETTING THE LCD CONTRAST There are three contrast levels for this telephone. Set the level as follows: 1 2 While in the Standby mode, press Press the Key button 6 , or the and hold the MENU/MUTE button. Up/Down buttons to select the LCD Contrast setting. 3 4 Press the EDIT/FLASH button . Press the MEMO/SAVE button when Press the Up/Down buttons to done; a confirmation tone will be select one of the three contrast heard. levels (3 being the darkest, 1 b
Краткое содержание страницы № 16
SET-UP INSTRUCTIONS (CONTINUED) SETTING THE PBX NUMBER This telephone enables you to preset the PBX number (such as 8 or 9), while you are using a switchboard system. 1 2 While in the Standby mode, press Press the Key button 7 , or the and hold the MENU/MUTE button. Up/Down buttons to select the PBX Number setting. 3 4 Press the EDIT/FLASH button . Press the MEMO/SAVE button when Press the Up/Down buttons to done; a confirmation tone will be select the PBX number. The PBX heard. numb
Краткое содержание страницы № 17
SET-UP INSTRUCTIONS (CONTINUED) SETTING THE PBX MODE This telephone enables you to turn the PBX system On or Off, depending on the telephone system being used. 1 2 While in the Standby mode, press Press the Key button 8 , or the and hold the MENU/MUTE button. Up/Down buttons to select the PBX Mode setting. 3 4 Press the EDIT/FLASH button . Press the MEMO/SAVE button when Press the Up/Down buttons to done; a confirmation tone will be select the desired setting: heard. PBX MODE OFF: Se
Краткое содержание страницы № 18
SET-UP INSTRUCTIONS (CONTINUED) SETTING THE PAUSE TIME This telephone enables you to adjust the pause time when placing a call using a switchboard system or dialing long distance calls . 1 2 While in the Standby mode, press Press the Key button 9 , or the and hold the MENU/MUTE button. Up/Down buttons to select the Pause Time setting. 3 4 Press the EDIT/FLASH button . Press the MEMO/SAVE button when Press the Up/Down buttons to done; a confirmation tone will be adjust the pause time.
Краткое содержание страницы № 19
SET-UP INSTRUCTIONS (CONTINUED) SETTING THE MSG (MESSAGE) WAITING This will enable to you to turn off the Message Waiting Indicator. 1 2 While in the Standby mode, press Press the Key button 0 , or the and hold the MENU/MUTE button. Up/Down buttons to select the MSG Waiting setting. 3 4 Press the EDIT/FLASH button . Press the MEMO/SAVE button; the message Waiting Indicator will turn off. NOTE: 5 Message Waiting Indicator will auto- matically turn on if you have subscribed to Voice Mail
Краткое содержание страницы № 20
SET-UP INSTRUCTIONS (CONTINUED) SETTING THE AUTO ANSWER MODE This will enable you to turn the auto answer On or Off. In On mode, the telephone will automatically answer an incoming call when the handset is lifted from the base . 1 2 While in the Standby mode, press Press the Key button * , or the and hold the MENU/MUTE button. Up/Down buttons to select the Auto Answer mode setting. 3 4 Press the EDIT/FLASH button . Press the MEMO/SAVE button when Press the Up/Down buttons to turn don
