Краткое содержание страницы № 1
METROLOGIC INSTRUMENTS, INC.
®
MS7120 Orbit Presentation
Laser Scanner
Installation and User’s Guide
Краткое содержание страницы № 2
Copyright © 2008 by Metrologic Instruments, Inc. All rights reserved. No part of this work may be reproduced, transmitted, or stored in any form or by any means without prior written consent, except by reviewer, who may quote brief passages in a review, or provided for in the Copyright Act of 1976. Trademarks Metrologic is a registered trademark of Metrologic Instruments, Inc. Products identified in this document are
Краткое содержание страницы № 3
TABLE OF CONTENTS Introduction Product Overview............................................................................................. 1 Scanner and Accessories................................................................................. 2 Scanner Components....................................................................................... 4 Cable Removal................................................................................................. 4 Caution and Serial Nu
Краткое содержание страницы № 4
TABLE OF CONTENTS Default Settings - Communication Parameters................................................... 25 Scanner Configuration.................................................................................... 30 Configuration Modes ...................................................................................... 30 Bar Codes .................................................................................................. 30 MetroSet2.....................................
Краткое содержание страницы № 5
INTRODUCTION ® Orbit is an aggressive, omnidirectional laser bar code scanner ideal for use in retail, convenience, liquor and specialty stores Designed to be lightweight and rugged, Orbit’s small size makes it ideal for applications where counter space is limited. It’s unique contoured shape allows it to be picked-up and used as a hand-held scanner when scanning large or bulky items. Key Product Features • Fully Automatic Scanning Operation • Adjustable Scan Head • User-Rep
Краткое содержание страницы № 6
INTRODUCTION Scanner and Accessories BASIC KIT COMPONENTS Part No. Description MS7120 Orbit Presentation Laser Bar Code Scanner MS7120 Orbit Presentation Laser Bar Code Scanner 00-02282x Installation and User’s Guide ® 00-02407x MetroSelect Configuration Guide * Guides also available for download at www.metrologic.com. OPTIONAL ACCESSORIES Part No. Description AC to DC Power Transformer - Regulated 5.2VDC @ 1A output. 46-00525 90VAC to 255VAC United States, Canada and J
Краткое содержание страницы № 7
INTRODUCTION Scanner and Accessories OPTIONAL ACCESSORIES Part No. Description RS485 Applications MVC** Metrologic Voltage Converter Cable ±12VDC to +5.2VDC ** Contact a Metrologic customer service representative for additional information on the MVC cable series and the host connections available. Keyboard Wedge PowerLink Cable 59-59002x-3 straight cord, short strain relief Stand Alone Keyboard PowerLink Cable 59-59020x-3 straight cord, short strain relief ™ USB Full Spe
Краткое содержание страницы № 8
INTRODUCTION Scanner Components ITEM NO DESCRIPTION 1 White LED (see page 12) 2 Blue LED (see page 12) 3 Red Output Window (Laser Aperture) 4 Speaker (see page 12) 5 Pin Hole for Cable Release 6 10-Pin RJ45, Female Socket (see page 33) 7 Adjustable Scan Head, 30° Figure 1. Scanner Components Cable Removal 1. Locate the small ‘pin-hole’ on the bottom of the scanner near the cable. 2. Bend an ordinary paperclip into the shape shown. 3. Insert the paperclip into the
Краткое содержание страницы № 9
INTRODUCTION Caution and Serial Number Labels Figure 3. Labeling Locations on the Bottom of the Scanner and Examples Caution To maintain compliance with applicable standards, all circuits connected to the scanner must meet the requirements for SELV (Safety Extra Low Voltage) according to EN/IEC 60950-1. To maintain compliance with standard CSA C22.2 No. 60950-1/UL 60950-1 and norm EN/IEC 60950-1, the power source should meet applicable performance requirements for a
Краткое содержание страницы № 10
INTRODUCTION Mounting Specifications Optional Wall/Counter Mount Item Description Qty. a. Locking Plate, MLPN 50-50302 1 b. Base Cover, MLPN 50-50301 1 c. #7 x 1.00" Wood Screw, MLPN 18-18013 3 d. M3 x 8 mm Flathead Screw, MLPN 18-18004 4 Figure 4. Kit Components 1. Drill three #39 pilot holes. Note the position Orbit will rest (see Figure 5). Use the dimensions provided in Figure 5 or the locking plate as a template to drill three #39 pilot holes in the mounting surface
Краткое содержание страницы № 11
INSTALLATION RS232, Light Pen Emulation 1. Turn off the host device. 2. Plug the male 10-pin RJ45 end of the PowerLink cable into the 10-pin socket on the MS7120. 3. Connect the 9-pin female end of the PowerLink cable to the host device. 4. Plug the external power supply into the power jack on the PowerLink cable. Check the AC input requirements of the power supply to make sure the voltage matches the AC outlet. The outlet must be located near the equipment and be eas
Краткое содержание страницы № 12
INSTALLATION RS485 1. Turn off the host device. 2. Plug the male 10-pin RJ45 end of the MVC cable into the 10-pin socket on the MS7120. 3. Connect the other end of the MVC cable to the host device. 4. Turn on the host device. Figure 10. When the scanner first receives power, the blue and white LED will toggle on and off then the scanner will beep once. Plugging the scanner into the serial port of the PC does not guarantee that scanned information
Краткое содержание страницы № 13
INSTALLATION Keyboard Wedge 1. Turn off the host device. 2. Plug the male 10-pin RJ45 end of the PowerLink cable into the 10-pin socket on the MS7120. 3. Disconnect the keyboard from the host device. 4. Connect the “Y” end of the PowerLink cable to the keyboard and the keyboard port on the host PC. If necessary use the male/female adapter cable supplied with the scanner for proper connections. 5. Plug the external power supply into the power jack on the PowerLink cable.
Краткое содержание страницы № 14
INSTALLATION Stand-Alone Keyboard 1. Turn off the host device. 2. Plug the male 10-pin RJ45 end of the PowerLink cable into the 10-pin socket on the MS7120. 3. Connect the other end of the PowerLink cable to the keyboard port on the host device. 4. Plug the external power supply into the power jack on the PowerLink cable. Check the AC input requirements of the power supply to make sure the voltage matches the AC outlet. The outlet must be located near the equipment and
Краткое содержание страницы № 15
INSTALLATION Full Speed or Low Speed USB 1. Turn off the host device. 2. Plug the male 10-pin RJ45 end of the USB cable into the 10-pin socket on the MS7120. 3. Plug the other end of the USB interface cable into the host device’s USB port. 4. Turn on the host device. When the scanner first receives power, the blue and white LED will toggle on and off then the scanner will beep once. Figure 13. As a default, the MS7120-38 leaves the factory with USB Keyboard Emulatio
Краткое содержание страницы № 16
SCANNER OPERATION Audible Indicators When the MS7120 is in operation, it provides audible feedback to indicate the status of the scanner. Eight settings are available for the tone of the beep (normal, six alternate tones and no tone). For instructions on how to change the tone of the beeper, refer to the MetroSelect Configuration Guide (00-02407). One Beep When the scanner first receives power the blue and white LED will toggle on and off. The scanner will beep once, then t
Краткое содержание страницы № 17
SCANNER OPERATION Visual Indicators The MS7120 is equipped with a blue and a white LED that indicates the scanner’s state and the status of the current scan when the unit is in operation. Figure 14. LED Location No LEDs The LEDs will not be illuminated if the scanner is not receiving power from the host or transformer. Steady Blue When the laser is active, the blue LED is illuminated. The blue LED will remain on until the laser is deactivated. During the power
Краткое содержание страницы № 18
SCANNER OPERATION Failure Mode Indicators Flashing Blue with One Razzberry Tone This indicates that the scanner has experienced a laser subsystem failure. Return the unit to an authorized service center for repair. Synchronized Flashing of Blue and White with Two Razzberry Tones This indicates that the scanner has experienced a motor failure. Return the unit to an authorized service center for repair. Three Beeps - On Power Up If the scanner beeps three times on p
Краткое содержание страницы № 19
SCANNER OPERATION Depth of Field Specifications* Normal Scan Zone Specifications are based on a 0.33 mm (13 mil) bar code. Figure 15. MS7120 Normal Depth of Field Reduced Scan Zone Specifications are based on a 0.33 mm (13 mil) bar code. Figure 16. MS7120 Reduced Depth of Field * All specifications are subject to change without notice. 15
Краткое содержание страницы № 20
SCANNER OPERATION Depth of Field by Bar Code Element Width* Normal Scan Zone MINIMUM BAR CODE ELEMENT WIDTH A B C D E F G H J K mm .13 - - - .19 - .25 .33 - .66 mils 5.2 - - - 7.5 - 10 13 - 26 Figure 17. Normal Scan Zone by Bar Code Element Width * All specifications are subject to change without notice. 16
