Краткое содержание страницы № 1
43-5521.fm Page 1 Monday, June 5, 2000 12:29 PM
2.4 GHz Digital
Spread Spectrum
Cordless Telephone
with Caller ID/Call Waiting
Owner’s Manual
Please read before using this equipment.
Краткое содержание страницы № 2
43-5521.fm Page 2 Monday, June 5, 2000 12:29 PM Contents Features .................................................................................................................................. 6 Installation .............................................................................................................................. 7 Mounting the Phone .......................................................................................................... 7 On a Desk, Shelf, or Table
Краткое содержание страницы № 3
43-5521.fm Page 3 Monday, June 5, 2000 12:29 PM This phone has been tested and found to • caller's name and number. comply with all applicable UL and FCC stan- dards. READ THIS BEFORE INSTALLATION WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain We have designed your phone to conform to or moisture. federal regulations, and you can connect it to most telephone lines. However, each phone (and each device, such as a telephone or an- CAUTION swering machin
Краткое содержание страницы № 4
43-5521.fm Page 4 Monday, June 5, 2000 12:29 PM make and receive calls if there is an AC protection circuits meet or exceed the FCC power failure. requirements. However, lightning striking the telephone or power lines can damage your • Some cordless phones operate at fre- telephone. quencies that might cause interference to nearby TVs and VCRs. To minimize Lightning damage is not common. Neverthe- or prevent such interference, the base of less, if you live in an area that has severe the cordl
Краткое содержание страницы № 5
43-5521.fm Page 5 Monday, June 5, 2000 12:29 PM 3. Never install telephone wiring during a of the type of power supply to your lightning storm. home, consult your local power com- pany. 4. Never install telephone jacks in wet locations unless the jack is specifically 13. Do not allow anything to rest on the designed for wet locations. power cord. Do not locate this product where the cord will be stepped on. 5.Never touch uninsulated telephone wires or terminals unless the telephone 14. Do not
Краткое содержание страницы № 6
43-5521.fm Page 6 Monday, June 5, 2000 12:29 PM fied technician to restore the product to 2. Do not dispose of the battery pack in a normal operation. fire. The cell may explode. Check with local codes for possible special disposal • If the product has been dropped or the instructions. cabinet has been damaged. 3. Do not open or mutilate the battery • If the product exhibits a distinct change pack. Released electrolyte is corrosive in performance. and may cause damage to the eyes or skin. It
Краткое содержание страницы № 7
43-5521.fm Page 7 Monday, June 5, 2000 12:29 PM Lighted Keypad — lights when you press Auto Talk — lets you set the phone so you any key or receive a call, making the phone can answer a call simply by lifting the hand- easy to use, even in the dark. set from the base. Network Services — lets you use the phone Ample Talk and Standby Time — the sup- company’s special services such as return plied battery (when fully charged) provides call, repeat dial, and cancel Call Waiting. about 7 hours of
Краткое содержание страницы № 8
43-5521.fm Page 8 Monday, June 5, 2000 12:29 PM Cautions: 1. Insert the bracket’s tabs into the base’s upper tab slots, then press down on the You must use a Class 2 power bracket’s clips and insert them into the source that supplies 9V DC clip slots. ! and delivers at least 210 mA. 2. Plug one end of the supplied long modu- Its center tip must be set to positive and lar cord into the TEL LINE jack on the its plug must fit the phone's DC IN 9V back of the base. jack. The supplied adapter meet
Краткое содержание страницы № 9
43-5521.fm Page 9 Monday, June 5, 2000 12:29 PM 15 4. Route the adapter and modular cords 1.Drill two holes 3 /16 3 /16" through the grooves on the bracket. inches (100 mm) apart. Then thread a screw into each hole, letting the 15 3 3 /16" heads extend about /16 inch (5 mm) from the wall. 2. Plug one end of the sup- plied long modular cord into the TEL LINE jack on the back of the base and route the adapter cable and modular cords through the grooves on the base. 5. Plug the modu- lar cord's
Краткое содержание страницы № 10
43-5521.fm Page 10 Monday, June 5, 2000 12:29 PM 3. Plug the battery pack's connector into • About once a month, fully discharge the the socket in the compartment, (the con- battery by keeping the handset off the nector fits only one way), replace the base until Low Battery flashes. Oth- battery pack, and replace the cover. erwise, the battery pack loses its ability to fully recharge. • If the display is blank and the phone does not work, recharge the battery pack. (The battery power might be
Краткое содержание страницы № 11
43-5521.fm Page 11 Monday, June 5, 2000 12:29 PM Please call 1-800-THE-SHACK (1-800-843- Ringer A High, Ringer A Low, Ring- 7422) for information on Ni-Cd battery recy- er B High, or Ringer B Low appears. cling and disposal bans/restrictions in your Note: Pressing VOL/CID 8 at Ringer A area. RadioShack’s involvement in this pro- High or VOL/CID 9 at Ringer B Low gram is part of the company’s commitment to does not change the setting. Press the oppo- preserving our environment and conserving s
Краткое содержание страницы № 12
43-5521.fm Page 12 Monday, June 5, 2000 12:29 PM 3. Press SELECT/CHANNEL to change the Caller ID/Call Waiting setting. On or Off appears. 4. Return the handset to the base to store the new setting. STORING YOUR AREA CODE You can store your local area code in the phone's Caller ID record so it does not show the area code if the received call is from your local area. If for some reason you need to dial the area code (or store it in the memory), you can add it afterwards. See “Adding/De- leting
Краткое содержание страницы № 13
43-5521.fm Page 13 Monday, June 5, 2000 12:29 PM Operation A QUICK LOOK AT THE HANDSET Note: The handset window has plastic film on it to protect it during shipment. Carefully peel off the film before using your phone for the first time. Use VOL/CID 8/9 to adjust the handset volume (see “Adjusting the Handset Volume” on Page 14), set the ringer tone/volume (see “Setting the Ringer Use MEM to store or re- Tone/Volume” on Page 11), view Caller call names and numbers ID records (see “Call
Краткое содержание страницы № 14
43-5521.fm Page 14 Monday, June 5, 2000 12:29 PM If you make a mistake, press DEL until the in- you want to dial appears. Then press TALK correct entry is erased, then enter the correct and the phone dials the number. number. To delete the entire number, hold Notes: down DEL for at least 1 second. • You can also press RDL/PAUSE after When you receive a call, Incoming Call pressing TALK to dial the last number appears. To answer it, lift the handset from dialed. the base and press TALK. If aut
Краткое содержание страницы № 15
43-5521.fm Page 15 Monday, June 5, 2000 12:29 PM The phone automatically resets to the pulse Important: Some phone companies use dif- mode the next time you make or receive a ferent key sequences to activate the fea- call. tures. If your phone company uses different sequences, you must edit the sequence be- fore using the service. See “Editing Ad- PAGING vanced Service Names and Numbers” on Page16. To send a page from the base to the handset or to locate the handset when the phone is not in u
Краткое содержание страницы № 16
43-5521.fm Page 16 Monday, June 5, 2000 12:29 PM Follow these steps to access services. 4. Press SELECT/CHANNEL. A menu listing Edit, Restore, and Go back 1. Lift the handset. appears. Press VOL/CID 8 or 9 to highlight the desired option then press 2. Press MENU. Return Call, Repeat SELECT/CHANNEL to choose it. Dial, and Cancel CW appear. Edit — Service name appears. Edit the service name and press SELECT/CHANNEL. Then, Service number appears. Edit the number and press SELECT/CHANNEL. Enter t
Краткое содержание страницы № 17
43-5521.fm Page 17 Monday, June 5, 2000 12:29 PM 2. Hold down MEM until Memory Store 8. Press SELECT/CHANNEL. The phone and a list of memory location numbers beeps and Memory nn Stored appear. appears (nn is the location number you selected). After 2 seconds, Memory 3. Press a number (01-20) or press VOL/ Store appears. Repeat Steps 3–8 to CID 8 or 9 to choose a two-digit mem- store more numbers. ory location. Precede a single digit loca- tion number with 0 — 01, 02, 03, and so 9. When you fi
Краткое содержание страницы № 18
43-5521.fm Page 18 Monday, June 5, 2000 12:29 PM activates) then enter a memory location Entering a Pause number. In some telephone systems, you must dial an access code (9, for example) and wait for a Chain-Dialing Service Numbers second dial tone before you can dial an out- side number. You can store the access code For quick recall of numbers for special ser- with the phone number. However, you vices (such as bank-by-phone), store each should also store a pause after the access group of nu
Краткое содержание страницы № 19
43-5521.fm Page 19 Monday, June 5, 2000 12:29 PM Notes: If the phone's Caller ID memory becomes full, any new call replaces the oldest call's • Connecting a headset disconnects the record. handset's earpiece and microphone. Reviewing Caller ID Records • VOL/CID 8 or 9 on the handset also controls the headset's volume. If the handset is faceup on the base, it shows the number of new Caller ID records, if any, • If you place the handset on the base to and the total number of records. recharge i
Краткое содержание страницы № 20
43-5521.fm Page 20 Monday, June 5, 2000 12:29 PM Storing a Caller ID Record to Display Description Memory The caller is not within a Unknown Caller ID service area. Follow these steps to store the name and Name number from a Caller ID record into a memo- or ry location. Unknown Number 1. Press CID then VOL/CID 8 or 9 to Appears if there was an Incomplete recall the record you want to store. error during the transmis- Data sion of Caller ID informa- If you want to add or delete the area
