Краткое содержание страницы № 2
Table of contents Adjusting the sound ............................... 36 Important safety Presenting from a USB Reader............ 37 instructions ........................... 3 Shutting down the projector ............... 38 Direct power off..................................... 38 Introduction.......................... 7 Menu operation ...................................... 39 Projector features.....................................7 Shipping contents......................................8 Mainte
Краткое содержание страницы № 3
Important safety instructions Your projector is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that you follow the instructions mentioned in this manual and marked on the product. Safety Instructions 1. Please read this manual before 5. In some countries, the line voltage is you operate your projector. Save NOT stable. This projector is it for future reference. designed to operate
Краткое содержание страницы № 4
Safety Instructions (Continued) 7. Do not operate light sources beyond 10. When the projector is under the rated light source life. Excessive operation, you may sense some operation of light sources beyond the heated air and odor from its rated life could cause them to fail on ventilation grill. It is a normal rare occasions. phenomenon and not a product defect. 11. Do not place this projector in any of the following environments. - Space that is poorly ventilated or confined. Allow at
Краткое содержание страницы № 5
Safety Instructions (Continued) 12. Do not block the ventilation holes. 15. Do not step on the projector or place - Do not place this projector on a any objects upon it. Besides probable blanket, bedding or any other soft physical damage to the projector, doing surface. so may result in accidents and possible - Do not cover this projector with a cloth injury. or any other item. - Do not place inflammables near the projector. 16. Do not place liquids near or on the If the ventilati
Краткое содержание страницы № 6
Safety Instructions (Continued) Ceiling mounting the projector We want you to have a pleasant experience using your BenQ projector, so we need to bring this safety matter to your attention to prevent possible damage to person and property. If you intend to mount your projector on the ceiling, we strongly recommend that you use a proper fitting BenQ projector ceiling mount kit and that you ensure it is securely and safely installed. If you use a non-BenQ brand projector ceiling mount kit, the
Краткое содержание страницы № 7
Introduction Projector features The projector integrates high-performance optical engine projection and a user-friendly design to deliver high reliability and ease of use. The projector offers the following features. • ECO BLANK - With technology, the Eco Blank function will save up to 90% of your light source power at the same time your image is hiding • Network Settings allowing management of projector status from a computer using a web browser • Microphone jack to output the sound through
Краткое содержание страницы № 8
Shipping contents Carefully unpack and verify that you have all of the items shown below. If any of these items are missing, please contact your place of purchase. Standard accessories The supplied accessories will be suitable for your region, and may differ from those illustrated. *The warranty card is only supplied in some specific regions. Please consult your dealer for detailed information. Projector Power cord VGA cable Quick start guide User manual CD Warranty card* Remote control wi
Краткое содержание страницы № 9
Projector exterior view 1. External control panel Front/upper side (See "Controls and functions" on page 10 for details.) 1 2. Vent (cool air intake) 4 3. Lens cover 2 4. Focus ring 5. Vent (heated air exhaust) 5 6. Front IR remote sensor 6 7. Projection lens 8. AC power jack 9. 12V DC output terminal Used to trigger external devices such 3 7 as an electric screen or light control, etc. Consult your dealer for how to connect these devices. 10. RJ45 LAN input jack 11. USB Mini-B port 12. RS23
Краткое содержание страницы № 10
Controls and functions 9. POWER indicator light Projector Lights up or flashes when the projector is under operation. 1 10. AUTO Automatically determines the best picture 2 9 timings for the displayed image. 3 10 11. Right/ 4 11 5 Increases the projector volume. 6 12 When the On-Screen Display (OSD) 7 13 8 menu is activated, the #6, #5, and #11 5 keys are used as directional arrows to select the desired menu items and to 1. Focus ring make adjustments. Adjusts the focus of the projected im
Краткое содержание страницы № 11
Remote control 6. MODE/ENTER Selects an available picture setup mode. Activates the selected On-Screen 1 Display (OSD) menu item. 13 2 7. LASER 14 Emits visible laser pointer light for 15 3 presentation purposes. 4 16 8. PAGE UP/PAGE DOWN Operates your display software program 5 17 (on a connected PC) which responds to page up/down commands (like Microsoft 6 PowerPoint). 16 9. FREEZE 18 7 Freezes the projected image. 8 19 10. NETWORK SETTING Enters network setting directly. 20 9 11. TEST 2
Краткое содержание страницы № 12
18. ZOOM+/ZOOM- Magnifies or reduces the projected image size. 19. VOLUME+/VOLUME- Adjusts the sound level. 20. MUTE Toggles projector audio between on and off. 21. ASPECT Selects the display aspect ratio. 22. MIC/VOL +/- Adjusts the microphone sound level. 23. CAPTURE Captures the projected picture and save it as your startup screen. 24. Numeric buttons Enters numbers in network settings. Numeric buttons 1, 2, 3, 4 cannot be pressed when asked to enter password. Operating the LASER point
Краткое содержание страницы № 13
Approx. +15º Approx. +15º Remote control effective range Infra-Red (IR) remote control sensors are located on the front and the rear of the projector. The remote control must be held at an angle within 30 degrees perpendicular to the projector's IR remote control sensors to function correctly. The distance between the remote control and the sensors should not exceed 8 meters (~ 26 feet). Make sure that there are no obstacles between the remote control and the IR sensors on the projector that
Краткое содержание страницы № 14
Positioning your projector Choosing a location Your projector is designed to be installed in one of four possible installation locations: 1. Front Table 3. Rear Ceiling Select this location with the projector Select this location with the projector placed on the table in front of the screen. suspended upside-down from the ceiling This is the most common way to position behind the screen. the projector for quick setup and Note that a special rear projection screen portability. and the BenQ P
Краткое содержание страницы № 15
Obtaining a preferred projected image size The distance from the projector lens to the screen, the zoom setting, and the video format each factors in the projected image size. Projection dimensions Refer to "Dimensions" on page 54 for the center of lens dimensions of this projector before calculating the appropriate position. LX60ST Screen size Screen Center of lens Vertical offset Projection distance Screen size Vertical offset Diagonal Distance from screen (mm) W H (mm) (mm) (mm) Inch mm
Краткое содержание страницы № 16
LW61ST Screen size Screen Center of lens Vertical offset Projection distance Screen size Vertical offset Diagonal Distance from screen (mm) W H (mm) (mm) (mm) Inch mm 80 2032 1723 1077 842 53.85 100 2540 2154 1346 1053 67 120 3048 2585 1615 1263 81 150 3810 3231 2019 1579 101 180 4572 3877 2423 1895 121 200 5080 4308 2692 2105 135 220 5588 4739 2962 2316 148 240 6096 5169 3231 2526 162 270 6858 5816 3635 2842 182 300 7620 6462 4039 3158 202 For example, if you are using a 120-inch scr
Краткое содержание страницы № 17
Connection When connecting a signal source to the projector, be sure to: 1. Turn all equipment off before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly inserted. • In the connections shown below, some cables may not be included with the projector (see "Shipping contents" on page 8). They are commercially available from electronics stores. • The connection illustrations below are for reference only. The rear connecting jacks available o
Краткое содержание страницы № 18
• Many notebooks do not turn on their external video ports when connected to a projector. Usually a key combo like FN + F3 or CRT/LCD key turns the external display on/off. Locate a function key labeled CRT/ LCD or a function key with a monitor symbol on the notebook. Press FN and the labeled function key simultaneously. Refer to your notebook's documentation to find your notebook's key combination. • The D-Sub output only works when an appropriate D-Sub input is made to the COMPUTER 1 jack. •
Краткое содержание страницы № 19
Once connected, the audio can be controlled by the projector On-Screen Display (OSD) menus. See "Audio Settings" on page 45 for details. The table below describes the connection methods for different devices, and where the sound is from. Device PC/Component Video Video/S-Video Microphone AUDIO IN 1/AUDIO IN Audio input port AUDIO (L/R) MIC 2 • MIC The projector can play AUDIO IN 1/AUDIO IN • AUDIO IN 1/MIC AUDIO (L/R)/MIC 2/MIC the sound from... • AUDIO IN 2 (L/R)/ MIC Audio output port AUDI
Краткое содержание страницы № 20
Operation Starting up the projector 1. Plug the power cord into the projector and into a power outlet. Turn on the power outlet switch (where fitted). Check that the POWER indicator light on the projector lights orange after power has been applied. Please use the original accessories (e.g. power cord) only with the device to avoid possible dangers such as electric shock and fire. 2. Press POWER or ON to start the projector. As soon as the light source lights up, a "Power On Tone" will be
Краткое содержание страницы № 1
LX60ST/LW61ST
Digital Projector
User Manual
