Краткое содержание страницы № 1
Contents
Safety precautions 2
COLOUR TELEVISION
Preparation 3
......
1 Confirm which remote control you have 3
INSTRUCTIONS
...................................
2 Inserting the batteries 3
...
3 Connecting the aerial and external devices 4
Thank you for buying this JVC
4 Connecting the power cord ........................ 6
colour television.
..............................................
5 SETUP TOUR 6
To make sure you understand how to
Basic operation 7
use your new TV, please read this
Remote c
Краткое содержание страницы № 2
Safety precautions WARNING • To prevent fire or shock hazard, do not expose the TV to rain or moisture. CAUTION •Operate only from the power source indicated on the rear of the TV. •Avoid damaging the power cord and mains plug. When you unplug the TV, pull it out by the mains plug. Do not pull on the power cord. •Never block or cover the cabinet openings for ventilation. Never install the TV where good 15 cm ventilation is unattainable. When installing this TV, leave spaces for ventilation aroun
Краткое содержание страницы № 3
Preparation 1 Confirm which remote control you have Your TV comes with one of the three remote controls shown below. Functions you can operate differ depending on the type of remote control. RM-C368GY ECO PICTURE POWER SENSOR BOOSTER SYSTEM PICTURE COLOUR SOUND MODE TV/VIDEO 12 3 I/II 45 6 OFF 78 9 TIMER CHANNEL RETURN+ - -- SCAN 0 / DISPLAY MUTING MENU CHANNEL VOLUME REMOTE CONTROL UNIT RM-C368GY 2 Inserting the batteries Correctly insert two batteries, observing the , and . polarities and
Краткое содержание страницы № 4
Preparation 3 Connecting the aerial and external devices • For further details, refer to the manuals provided with the devices you are connecting. • Connecting cables are not supplied. • The front and rear AUDIO/VIDEO input jacks are directly connected so that input to either jack is output through both. You cannot provide input to both the front and rear jacks at the same time. Disconnect one input, or use one of the jacks as an output jack only (for monitoring or recording). • The rod aerial i
Краткое содержание страницы № 5
Preparation Connecting other external devices To audio To video output output VIDEO AUDIO VCR (for playing) IN OUT VCR (for recording) To audio To video input input • Illustration of AV-21D43. To video Camcorder output or To audio TV game output • Illustration of AV-21D43. MENU VIDEO AUDIO IN Headphones • Use the headphones with a stereo mini jack (3.5 mm in diameter). When you connect the headphones, the TV speakers go off. 5
Краткое содержание страницы № 6
Preparation 4 Connecting the power cord Connect the power cord to the AC outlet. Operate only from the power source indicated on the rear of the TV. 5 SETUP TOUR When the TV is first turned on it enters the SETUP TOUR mode, and the JVC logo is displayed. Follow the instructions on the on-screen display to perform the SETUP TOUR. •In case of resetting that the reason for such as removal, you can set the SETUP TOUR function on the “MENU 3” menu. For details, see page 14. 1 Press the Main power but
Краткое содержание страницы № 7
Basic operation • The illustration below is for the remote 1 Press the POWER button to turn control RM-C368GY. Your remote control may your TV on. not look exactly like the illustrations. • If your TV does not turn on, press the Main power button on the TV then press the POWER button again. • You can also turn on your TV by pressing any of the following buttons; ECO PICTURE POWER SENSOR BOOSTER - the CHANNEL m button SYSTEM PICTURE COLOUR SOUND MODE - the Number buttons TV/VIDEO 12 3 - the TV/V
Краткое содержание страницы № 8
Remote control buttons and functions ECO SENSOR button COLOUR SYSTEM button You can adjust this TV so that the screen If the picture is not clear or no colour automatically adjusts to the optimum appears, change the current colour system contrast according to the brightness of to another colour system. your room. This function reduces eye Press this button to select the colour strain and the power consumption of this system. TV. Press this button to select the desired In TV mode (channel 1 to 99
Краткое содержание страницы № 9
Remote control buttons and functions DISPLAY button CHANNEL SCAN button You can continuously display the current You can quickly view all TV channels channel number or VIDEO mode on the programmes that you can view on your screen. TV, and search for the programme you want to view. Press this button. To turn the display off, press this button 1 Press this button to start scanning again. TV channels. The TV channel programmes are each • When selecting a channel or VIDEO mode displayed for several
Краткое содержание страницы № 10
Remote control buttons and functions I/II button PICTURE BOOSTER button You can select one of the two bilingual When the picture is unclear because the sounds in an A2 stereo programme’s reception level of the TV signal is low, bilingual programme.Press the A2 activating the Picture Booster improves Bilingual button to select a bilingual the picture clarity in some situations. sound. Repeatedly press the PICTURE BOOSTER button to select the desired mode. I: Bilingual I HIGH: II: Bilingual II Th
Краткое содержание страницы № 11
Using the TV’s menus This TV has a number of functions you can operate using the menus. To use all your TV’s functions fully, you need to understand how to use the menus. 2 Repeatedly press the MENU T buttons to display a desired CHANNEL RETURN+ - -- SCAN 0 / menu. DISPLAY MUTING DISPLAY • If you hold down the y button, the next button menu is displayed. MENU / MENU MENU –/+ buttons buttons • If the selected function is on the first line, pressing the r button displays the CHANNEL VOLUME p
Краткое содержание страницы № 12
Using the TV’s menus When the time set for the ON TIMER ON TIMER function is reached: Your TV will automatically turn on and The TV automatically turns on and the tune into the channel you set after the channel set for the ON TIMER function is period of time you set. displayed. 1 Press MENU T to display the • For safety reasons the TV will automatically “MENU 1” menu, then select turn off if no operations are made within “ON TIMER”. approximately two hours after the TV is turned on with the ON T
Краткое содержание страницы № 13
Using the TV’s menus AUTO SHUTOFF BLUE BACK You can set your TV to turn off if no You can mute the sound and change the signals are received for about 15 minutes picture into a blue screen while no signals or longer after the end of a broadcast. are received by the TV, or when the signals are unstable. 1 Press MENU T to display the “MENU 2” menu, then select “AUTO 1 Press MENU T to display the SHUTOFF”. “MENU 2” menu, then select “BLUE BACK”. MENU 2 AUTO SHUTOFF ON
Краткое содержание страницы № 14
Using the TV’s menus SETUP TOUR AUTO CH PRESET You can start the SETUP TOUR function. You can automatically preset all TV channels that can be received by your TV 1 Press MENU T to display the to channels. “MENU 3” menu, then select “SETUP TOUR”. 1 Press MENU T to display the “MENU 3” menu, then select “AUTO MENU 3 AUTO CH PRESET CH PRESET”. MANUAL CH PRESET SETUP TOUR MENU 3 LANGUAGE ENGLISH AUTO CH PRESET MANUAL CH PRESET
Краткое содержание страницы № 15
Using the TV’s menus MANUAL CH PRESET You can manually preset desired TV If the picture is not clear: channels to desired channels. Fine-tune the TV channel. 1 Press MENU T to display the 1 Press MENU t to select “FINE”. “MENU 3” menu, then select MANUAL “MANUAL CH PRESET”. FINE SKIP NO SOUND SYSTEM B/G MENU 3 EXIT AUTO CH PRESET MANUAL CH PRESET SELECT BY PR 3 VL SETUP TOUR PROGRAM BY -+ EXIT BY LANGUAGE ENGLISH FIN
Краткое содержание страницы № 16
Using the TV’s menus SKIP Picture Adjustments You can set undesired channels to be You can adjust the picture as you like. skipped. Channels set to be skipped 1 Press MENU T to display the cannot be selected by the CHANNEL m “MENU 4” menu. buttons nor the CHANNEL SCAN button. • Channels to which TV channels have not MENU 4 TINT been preset are automatically set to be COLOUR skipped. BRIGHT CONT. SHARP 1 Press MENU T to display the SELECT BY EXIT BY “MENU 3” menu, then select
Краткое содержание страницы № 17
Using the buttons on the TV 1 MENU buttons • MENU y button ON • MENU m buttons TIMER POWER MENU CHANNEL VOLUME EXIT 2 CHANNEL m buttons 3 VOLUME m buttons 1 2 348 5 6 7 4 AI ECO sensor 5 Remote control sensor 6 ON TIMER lamp The light is switched on while ON TIMER function is operating. MENU CHANNEL VOLUME ON TIMER POWER EXIT 7 POWER lamp When the Main power is on, the light is red. 8 Main power button 1 2 3 45 67 8 17
Краткое содержание страницы № 18
Using the buttons on the TV Basic operation Operating menus • Check to make sure the CHILD LOCK You can operate functions in menus using function is set to “OFF”. When the CHILD the front control buttons on the TV. LOCK function is set to “ON”, the TV cannot be operated using the front control buttons. 1 Press MENU y to display a menu. For details, see “CHILD LOCK” on page 13. 2 Press MENU y repeatedly to display 1 Press CHANNEL M to turn the TV the menu you want to use. on from standby mode. 3
Краткое содержание страницы № 19
Troubleshooting If there is no picture or the TV does not operate normally, make sure the problem isn’t due to the reasons indicated below. If the problem persists even after taking the measures indicated, please contact a service technician. Cannot turn the TV on Poor picture • Press the Main power button on the TV. • Press the COLOUR SYSTEM button to select another colour system. (see page 8.) • Connect the power cord to the AC outlet. • Adjust the picture settings. (see page 16.) • Set the Pi
Краткое содержание страницы № 20
Specifications TV RF systems B, G, I, D, K, K1 Colour systems PAL, SECAM, NTSC 3.58 MHz/NTSC 4.43 MHz (in VIDEO mode only) Receiving channels VHF low channel (VL), VHF high channel (VH), UHF channel (U) Receives cable channels in mid band, super band and hyper band. External input / output INPUT: VIDEO input (RCA), AUDIO input (RCA) OUTPUT: VIDEO output (RCA), AUDIO output (RCA) Headphone jack: stereo mini jack (3.5 mm diameter) Accessories • Remote control unit: RM-C368GY • AA / R6 / UM-3 dry c
